System characterization report on PRecursore IperSpettrale della Missione Applicativa (PRISMA)

Abstract

Executive Summary This report addresses system characterization of the Italian Space Agency’s PRecursore IperSpettrale della Missione Applicativa (PRISMA) and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (band to band and image to image), radiometric, and spatial performances. Results of these analyses indicate that PRISMA has a band-to-band geometric performance in the range of −0.046 to 0.040 pixel; an image-to-image geometric performance (relative to the Landsat 8 Operational Land Imager) in the range of −60.791 meters (m; −2.03 pixels) to 299.541 m (9.98 pixels); a radiometric performance in the range of −0.037 to −0.001 in offset and 1.026 to 1.274 in slope; and a spatial performance with a relative edge response in the range of 0.56 to 0.63, full width at half maximum in the range of 1.84 to 1.97 pixels, and a modulation transfer function at a Nyquist frequency in the range of 0.054 to 0.096. Regarding fairly large geometric accuracy, the following explanation is provided to help the reader. The geometric accuracy required for PRISMA is a 200-m circular error at 90 percent (CE90) without ground control points (GCPs), a 15-m CE90 using GCPs is documented in the PRISMA mission overview (Agenzia Spaziale Italiana, 2021). The PRISMA images used for the current system characterization were georeferenced without using any GCPs; thus, the 200-m geometric accuracy requirement is applied. Beginning in 2022, a worldwide GCP database will be used in the PRISMA product processing chain, which will improve georeferencing accuracy to meet the 15-m CE90 requirement.