Geology Reports⌕ Search

USGS · ofr20201135

An assessment of the economic potential of lignite and leonardite resources in the Williston Basin, North Dakota

Abstract

The Bureau of Land Management (BLM) requested assistance from the U.S. Geological Survey (USGS) to conduct an assessment study to identify areas that may have economic potential for the future extraction of lignite and leonardite resources in the Williston Basin in North Dakota. The study will be used by the BLM to assist with the preparation of a revised resource management plan for the Williston Basin, in accordance with BLM planning policies. The assessment of the economic potential of lignite resources required the establishment of criteria defining an economic lignite deposit. In consultation with the BLM, criteria were established to delineate drill holes that contained economic lignite beds. The criteria established are a minimum lignite bed thickness, a minimum cumulative lignite thickness, a maximum cumulative stripping ratio, and a maximum overburden. Likewise, an assessment of the economic potential of leonardite deposits required the establishment of criteria delineating drill holes that contained economic leonardite deposits. The criteria established are a minimum leonardite bed thickness, a minimum cumulative leonardite thickness, and a maximum overburden. The drill hole data utilized in this study were obtained from the National Coal Resources Data System database and from several coal companies. Data from more than 20,000 drill holes, both proprietary and nonproprietary, were used to compile areas of economic potential for lignite or leonardite. Areas delineated as having lignite or leonardite resources with economic potential, based on the established criteria, were present in 24 counties in the western portion of North Dakota. Areas of economic potential were delineated using a visual best-fit method without croplines. Areas defined as having economic potential for certain lignite beds or leonardite deposits may extend beyond known croplines in this study. Stratigraphically, the lignite and leonardite deposits in the Williston Basin in North Dakota are mostly found in the Paleocene Fort Union Formation. Thick (greater than 20 feet) and laterally extensive (greater than 5 square miles) lignite beds are present in the Fort Union Formation throughout the Sentinel Butte and Tongue River Members. Lignite beds are also present in the Ludlow Member of the Fort Union Formation, although they are not as numerous or thick as they are in the overlying Sentinel Butte and Tongue River Members. As a result of lateral facies changes and migrating fluvial channel complexes in the Fort Union Formation, lignite beds of varying thickness occupy different stratigraphic horizons vertically throughout the Williston Basin. The calculation of volumes for lignite and leonardite resources was not part of the scope of this study requested by the BLM, but a future study by the USGS may involve a comprehensive assessment of lignite resources and reserves in the Williston Basin. This future study could combine geologic data compiled in this study with geologic data from a previously unpublished 2019 assessment study by the USGS in the Williston Basin in eastern Montana. This future USGS study could also include the calculation of volumes for lignite resources and reserves, based on economic models derived using analogs from active mining operations in the Williston Basin and available spot market or contract coal prices.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 45.89000815866184° to 49.009050809382046° latitude; -104.0625° to -99.931640625° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Brian N. Shaffer. 2021-01-14. An assessment of the economic potential of lignite and leonardite resources in the Williston Basin, North Dakota. https://doi.org/10.3133/ofr20201135

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

ECCOE Landsat quarterly calibration and validation report—Quarter 2, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 2 (April–June), 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov.

Open-File Report↗

ECCOE Landsat quarterly calibration and validation report—Quarter 1, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 1 (January–March) of 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov . One specific activity that the ECCOE Landsat Cal/Val Team closely monitored was a Landsat 8 Thermal Infrared Sensor encoder alerts anomaly. On March 18, 2026, the Thermal Infrared Sensor instrument’s mechanism control electronics board reset, driving several parameters to default power-on values. Subsequent telemetry and analysis determined that no persistent hardware misconfiguration was present and no radiometric or geometric degradation was observed.

Open-File Report↗

Floods of June 20–July 6, 2024, in the Big Sioux River, Rock River, Little Sioux River, Ocheyedan River, and Floyd River Basins, northwestern Iowa

Major flooding occurred on June 20–July 6, 2024, in northwestern Iowa affecting the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd River Basins. Heavy rain fell in northwestern Iowa, southwestern Minnesota, and southeastern South Dakota on June 20–22, 2024. Parts of northwestern Iowa recorded 2–6 inches of rainfall and localized amounts exceeding 12 inches. A maximum peak-of-record streamflow of 175,000 cubic feet per second at the U.S. Geological Survey streamgage Big Sioux River at Akron, Iowa (06485500), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at four locations along the Big Sioux River between U.S. Interstate 29 at Sioux City, Iowa, upstream to Iowa Highway 10 north of Hawarden, Iowa, a distance of 75.7 river miles. A maximum peak-of-record streamflow of 157,000 cubic feet per second at the U.S. Geological Survey streamgage Rock River near Rock Valley, Iowa (06483500), was recorded on June 22, 2024, and had an annual exceedance probability of less than 0.2 percent. High-water marks were measured at eight locations along the Rock River between County Road B30 east of Hudson, South Dakota, upstream to Iowa Highway 9 at Rock Rapids, Iowa, a distance of 39.3 river miles. A maximum peak-of-record streamflow of 63,000 cubic feet per second at the U.S. Geological Survey streamgage Little Sioux River at Correctionville, Iowa (06606600), was recorded on June 24, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at 11 locations along the Little Sioux River between Iowa Highway 31 west of Correctionville, Iowa, upstream to U.S. Highway 18 north of Spencer, Iowa, a distance of 134.8 river miles. A maximum streamflow of 24,500 cubic feet per second at the U.S. Geological Survey streamgage Ocheyedan River near Spencer, Iowa (06605000), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at three locations along the Ocheyedan River between County Road M38 west of Spencer, Iowa, upstream to U.S. Highway 18 west of Everly, Iowa, a distance of 12.8 river miles. A maximum streamflow of 41,000 cubic feet per second at the U.S. Geological Survey streamgage Floyd River at Alton, Iowa (06600100), was recorded on June 22, 2024, and had an annual exceedance probability range of 1–1.99 percent. High-water marks were measured at six locations along the Floyd River between Iowa Highway 3 at Le Mars, Iowa, upstream to Iowa Highway 10 at Alton, Iowa, a distance of 27.5 river miles. The high-water marks were used to develop flood profiles for the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd Rivers.

Iowa, Minnesota, South Dakota↗