Geology Reports⌕ Search

USGS · ofr20061305

Genetic Considerations for the Restoration of Smooth Cordgrass (Spartina alterniflora) Within Its Native Range

Abstract

In order to remain viable over many generations, plant populations require the ability to respond adaptively to a changing environment. Such adaptive potential is directly controlled by underlying genetic variation, which can be measured in terms of both heterozygosity at the individual level and clonal, or genotypic diversity at the population level. This report summarizes research relating to the importance of genetic diversity in the restoration of salt marsh smooth cordgrass, Spartina alterniflora, a dominant member of low elevation intertidal marshes throughout the northern Gulf of Mexico and Atlantic Coasts of North America. Recent research has indicated that S. alterniflora is a partially clonal species characterized by the recruitment of seedlings exclusively during the initial colonization phase of population establishment. A major consequence of this finding is that clonal diversity generally peaks rather early in the development of a restored marsh, depending on the rate of natural immigration and/or the clonal diversity of planting units, and then undergoes a steady decline over geological time spans because of stochastic mortality and intraspecific competition. Low levels of clonal diversity resulting from restricted immigration or clonally depauperate planting materials in turn places strict limits on opportunities for outcrossing in a species known to suffer from severe inbreeding depression. Low clonal diversity may further lead to declining levels of heterozyosity of individual clones, which directly affects competitive ability. In addition, the planting of genetically diverse plant materials should take into account the genetic and adaptive differentiation that takes place when plant populations are widely separated in space and/or dwell under varying sets of environmental conditions. Thus, steps should be taken to ensure that S. alterniflora clones developed for restorative plantings are both genetically diverse and sufficiently pre-adapted to environmental conditions at the proposed restoration site. This can be achieved by growing plant materials collected from local sources and by either taking care to maintain relatively high levels of clonal diversity or by planting clones at sufficiently low densities that they will not quickly grow to monopolize a restoration site without first producing several generations of sexual recruits through crosses with nearby native populations.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Steven E. Travis, C. Edward Proffitt, Keith R. Edwards. 2006. Genetic Considerations for the Restoration of Smooth Cordgrass (Spartina alterniflora) Within Its Native Range. https://doi.org/10.3133/ofr20061305

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

ECCOE Landsat quarterly calibration and validation report—Quarter 2, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 2 (April–June), 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov.

Open-File Report↗

ECCOE Landsat quarterly calibration and validation report—Quarter 1, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 1 (January–March) of 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov . One specific activity that the ECCOE Landsat Cal/Val Team closely monitored was a Landsat 8 Thermal Infrared Sensor encoder alerts anomaly. On March 18, 2026, the Thermal Infrared Sensor instrument’s mechanism control electronics board reset, driving several parameters to default power-on values. Subsequent telemetry and analysis determined that no persistent hardware misconfiguration was present and no radiometric or geometric degradation was observed.

Open-File Report↗

Floods of June 20–July 6, 2024, in the Big Sioux River, Rock River, Little Sioux River, Ocheyedan River, and Floyd River Basins, northwestern Iowa

Major flooding occurred on June 20–July 6, 2024, in northwestern Iowa affecting the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd River Basins. Heavy rain fell in northwestern Iowa, southwestern Minnesota, and southeastern South Dakota on June 20–22, 2024. Parts of northwestern Iowa recorded 2–6 inches of rainfall and localized amounts exceeding 12 inches. A maximum peak-of-record streamflow of 175,000 cubic feet per second at the U.S. Geological Survey streamgage Big Sioux River at Akron, Iowa (06485500), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at four locations along the Big Sioux River between U.S. Interstate 29 at Sioux City, Iowa, upstream to Iowa Highway 10 north of Hawarden, Iowa, a distance of 75.7 river miles. A maximum peak-of-record streamflow of 157,000 cubic feet per second at the U.S. Geological Survey streamgage Rock River near Rock Valley, Iowa (06483500), was recorded on June 22, 2024, and had an annual exceedance probability of less than 0.2 percent. High-water marks were measured at eight locations along the Rock River between County Road B30 east of Hudson, South Dakota, upstream to Iowa Highway 9 at Rock Rapids, Iowa, a distance of 39.3 river miles. A maximum peak-of-record streamflow of 63,000 cubic feet per second at the U.S. Geological Survey streamgage Little Sioux River at Correctionville, Iowa (06606600), was recorded on June 24, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at 11 locations along the Little Sioux River between Iowa Highway 31 west of Correctionville, Iowa, upstream to U.S. Highway 18 north of Spencer, Iowa, a distance of 134.8 river miles. A maximum streamflow of 24,500 cubic feet per second at the U.S. Geological Survey streamgage Ocheyedan River near Spencer, Iowa (06605000), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at three locations along the Ocheyedan River between County Road M38 west of Spencer, Iowa, upstream to U.S. Highway 18 west of Everly, Iowa, a distance of 12.8 river miles. A maximum streamflow of 41,000 cubic feet per second at the U.S. Geological Survey streamgage Floyd River at Alton, Iowa (06600100), was recorded on June 22, 2024, and had an annual exceedance probability range of 1–1.99 percent. High-water marks were measured at six locations along the Floyd River between Iowa Highway 3 at Le Mars, Iowa, upstream to Iowa Highway 10 at Alton, Iowa, a distance of 27.5 river miles. The high-water marks were used to develop flood profiles for the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd Rivers.

Iowa, Minnesota, South Dakota↗