Geology ReportsSearch

USGS · fs20173050

Assessment of undiscovered oil and gas resources in the Ventura Basin Province, California, 2016

Abstract

The U.S. Geological Survey (USGS) completed a geology-based assessment of undiscovered, technically recoverable conventional and continuous oil and gas resources in the part of the Ventura Basin Province that lies onshore or within State waters (within 3 miles of the shoreline) of California (fig. 1). Conventional oil and gas resources are those that have migrated upward into structural or stratigraphic traps from deep zones where the oil and gas is generated; water is present below the oil or gas. Continuous accumulations, in contrast, are those in which oil or gas is pervasively present in essentially all wells that penetrate them, that may not be structurally or stratigraphically trapped, and that typically lack oil-water or gas-water contacts. They are commonly produced with well-stimulation technology, such as hydraulic fracturing, referred to as “unconventional.” The same stimulation technology, however, is also used in many conventionally trapped accumulations. We estimated both the likely range of oil and gas volumes remaining to be discovered in accumulations similar to existing conventional oil and gas fields in the Ventura Basin Province (previously assessed by Keller [1995] as 1,060 million barrels of oil [MMBO], 1,900 billion cubic feet of gas [BCFG], and 60 million barrels of natural gas liquids [MMBNGL]), and the potential for oil and gas that might be present in a continuous accumulation at extreme depth in the floor of the basin.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 33.82023008524739° to 34.81605826221895° latitude; -120.6243896484375° to -117.39166259765625° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Marilyn E. Tennyson, Christopher J. Schenk, Janet K. Pitman, Paul G. Lillis, Timothy R. Klett, Michael E. Brownfield, Thomas M. Finn, Stephanie B. Gaswirth, Sarah J. Hawkins, Kristen R. Marra, Tracey J. Mercier, Phuong A. Le, Heidi M. Leathers-Miller. 2017-10-02. Assessment of undiscovered oil and gas resources in the Ventura Basin Province, California, 2016. https://doi.org/10.3133/fs20173050

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Divisions of geologic time—Major chronostratigraphic and geochronologic units

Introduction The reports and maps of our Nation’s geological surveys inform and benefit the public, private industry, government officials, and scientists. The use of clear and consistent nomenclature and classifications can improve communication of data and interpretations. Since 1899, the U.S. Geological Survey (USGS) Geologic Names Committee (GNC) has been responsible for defining standards that promote uniform geologic nomenclature and classifications among geoscientists. The GNC periodically publishes a geologic time scale, the “Divisions of Geologic Time,” that serves as the national standard for USGS publications (for example, refer to Orndorff and others, 2023). Authors may use other published geologic time scales, such as those of the Geological Society of America (GSA) or the International Commission on Stratigraphy (ICS), provided that they are clearly specified and referenced. Access to the USGS, GSA, and ICS geologic time scales is also available from the U.S. Geologic Names Lexicon (Geolex) website https://ngmdb.usgs.gov/Geolex/stratres/timescales. The geologic time scale serves a dual purpose by enabling authors to distinguish earth material units by position (chronostratigraphic) and time (geochronologic), as outlined in order of decreasing rank.

Fact Sheet