Geology ReportsSearch

USGS · fs20093001

Evaluation of Structural Best Management Practices for Highway Runoff in Beaufort and Colleton Counties, South Carolina, 2005-2006

Abstract

As part of the National Pollutant Discharge Elimination System (NPDES) permit program mandated in the Clean Water Act, the South Carolina Department of Transportation (SCDOT) is required to address the quality of stormwater runoff from state-maintained roadways. From 2005 to 2006, the SCDOT and the U.S. Geological Survey (USGS) worked cooperatively in Beaufort and Colleton Counties, South Carolina (SC), to evaluate the performance of four different structural devices that served as best management practices (BMPs). These structural devices were installed to lessen the potential effects of stormwater runoff on water quality in waterways near state roads. The purpose of this Fact Sheet is to summarize results published in the USGS Scientific Investigations Report 2008-5150. The report documents the ability of these four BMP devices to remove suspended sediment, metals, nutrients, and organics compounds in stormwater runoff. The quantity of rainfall and stormflow and quality of stormwater entering and leaving the BMPs were monitored during 12-13 storms over a 21-month period. The results provide the SCDOT with quantitative information to evaluate whether or not the BMPs effectively enhanced stormwater quality. This information can be used by the SCDOT and other State, local, and Federal agencies in the selection of appropriate BMPs for future installation.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Kevin Conlon, Celeste Journey. 2009. Evaluation of Structural Best Management Practices for Highway Runoff in Beaufort and Colleton Counties, South Carolina, 2005-2006. https://doi.org/10.3133/fs20093001

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Divisions of geologic time—Major chronostratigraphic and geochronologic units

Introduction The reports and maps of our Nation’s geological surveys inform and benefit the public, private industry, government officials, and scientists. The use of clear and consistent nomenclature and classifications can improve communication of data and interpretations. Since 1899, the U.S. Geological Survey (USGS) Geologic Names Committee (GNC) has been responsible for defining standards that promote uniform geologic nomenclature and classifications among geoscientists. The GNC periodically publishes a geologic time scale, the “Divisions of Geologic Time,” that serves as the national standard for USGS publications (for example, refer to Orndorff and others, 2023). Authors may use other published geologic time scales, such as those of the Geological Society of America (GSA) or the International Commission on Stratigraphy (ICS), provided that they are clearly specified and referenced. Access to the USGS, GSA, and ICS geologic time scales is also available from the U.S. Geologic Names Lexicon (Geolex) website https://ngmdb.usgs.gov/Geolex/stratres/timescales. The geologic time scale serves a dual purpose by enabling authors to distinguish earth material units by position (chronostratigraphic) and time (geochronologic), as outlined in order of decreasing rank.

Fact Sheet