Evaluation of weights of evidence to predict epithermal-gold deposits in the Great Basin of the western United States

Gary L. Raines

doi:10.1023/a:1021602316101

Home/Archive/USGS

USGS · 70260453

Evaluation of weights of evidence to predict epithermal-gold deposits in the Great Basin of the western United States

Gary L. Raines

View original source ↗Export metadata ↓

Abstract

The weights-of-evidence method provides a simple approach to the integration of diverse geologic information. The application addressed is to construct a model that predicts the locations of epithermal-gold mineral deposits in the Great Basin of the western United States. Weights of evidence is a data-driven method requiring known deposits and occurrences that are used as training sites in the evaluated area. Four hundred and fifteen known hot spring gold–silver, Comstock vein, hot spring mercury, epithermal manganese, and volcanogenic uranium deposits and occurrences in Nevada were used to define an area of 327.4 km 2 as training sites to develop the model. The model consists of nine weighted-map patterns that are combined to produce a favorability map predicting the distribution of epithermal-gold deposits. Using a measure of the association of training sites with predictor features (or patterns), the patterns can be ranked from best to worst predictors. Based on proximity analysis, the strongest predictor is the area within 8 km of volcanic rocks younger than 43 Ma. Being close to volcanic rocks is not highly weighted, but being far from volcanic rocks causes a strong negative weight. These weights suggest that proximity to volcanic rocks define where deposits do not occur. The second best pattern is the area within 1 km of hydrothermally altered areas. The next best pattern is the area within 1 km of known placer-gold sites. The proximity analysis for gold placers weights this pattern as useful when close to known placer sites, but unimportant where placers do not exist. The remaining patterns are significantly weaker predictors. In order of decreasing correlation, they are: proximity to volcanic vents, proximity to east-west to northwest faults, elevated airborne radiometric uranium, proximity to northwest to west and north-northwest linear features, elevated aeromagnetics, and anomalous geochemistry. This ordering of the patterns is a function of the quality, applicability, and use of the data. The nine-pattern favorability map can be evaluated by comparison with the USGS National Assessment for hot spring gold–silver deposits. The Spearman's ranked correlation coefficient between the favorability and the National Assessment permissive tracts is 0.5. Tabulations of the areas of agreement and disagreement between the two maps show 74% agreement for the Great Basin. The posterior probabilities for 51 significant deposits in the Great Basin, both used and not used in the model, show the following: 26 classified as favorable; 25 classified as permissive; and 1, Florida Canyon, classified as nonpermissive.The Florida Canyon deposit has a low favorability because there are no volcanic rocks near the deposit on the Nevada geologic map used. The largest areas of disagreement are caused by the USGS National Assessment team concluding that volcanic rocks older than 27 Ma in Nevada are not permissive, which was not assumed in this model. The weights-of-evidence model is evaluated as reasonable and delineates permissive areas for epithermal deposits comparable to expert's delineation. The weights-of-evidence model has the additional characteristics that it is well defined, reproducible, objective, and provides a quantitative measure of confidence.

Explore related subjects

Natural Resources Research Article

Source-reported bounding extent: 36.273382491792404° to 42.01392037172616° latitude; -120.3038484479028° to -114.03910682052589° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Gary L. Raines. 1999. Evaluation of weights of evidence to predict epithermal-gold deposits in the Great Basin of the western United States. https://doi.org/10.1023/a%3A1021602316101

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

Quantitative mineral resource assessment of lithium pegmatite deposits in the southern Appalachian orogen

The first quantitative mineral resource assessment for undiscovered lithium pegmatite deposits in the southern Appalachian region of the United States was conducted. Permissive tracts for lithium pegmatite deposits were delineated by integrating lithological, tectonic, geochemical, geophysical and mineral occurrence data. Lithium pegmatite prospectivity of the tracts was ranked with simplified mappable criteria, including proximity to Paleozoic felsic intrusions and major lithotectonic structures, stream sediment geochemical anomalies, and pegmatite occurrence data. The geospatial data and permissive tracts were used to estimate the number of undiscovered lithium pegmatite deposits. These estimates were integrated into probabilistic simulations along with a new global lithium pegmatite grade and tonnage dataset to quantify potential contained undiscovered lithium resources. An economic filter was applied to convert the probabilistic estimates of contained lithium into recoverable material. The identified lithium pegmatite resources for the Carolina Lithium and Kings Mountain deposits, North Carolina, contain 1589 thousand tons (kt) of Li 2 O. The median contained undiscovered resource for the southern Appalachian orogen was estimated to be 2240 kt Li 2 O. At 90% confidence, the region contains at least 130 kt Li 2 O, and 10,700 kt at 10% confidence. After applying economic filters, the median recoverable contained resource was 1430 kt Li 2 O, corresponding to approximately 201 years of current lithium imports for consumption in the United States. North and South Carolina are likely to contain most of these resources. Coarse data resolution and intra-state variations in the geological data contribute to uncertainty of undiscovered lithium pegmatite resources. Continued efforts to harmonize disparate geospatial datasets with updated or new information can improve the accuracy and precision of estimated undiscovered lithium pegmatite resources in the study area and at broader scales.

Alabama, Georgia, Maryland, North Carolina, South ↗

USGS2026

Quantitative mineral resource assessment of lithium pegmatite deposits in the northern Appalachian orogen, USA

Lithium demand is projected to increase more than 48 times by 2040 due to electric vehicle production and other energy storage needs. Most lithium production is outside of the USA, thereby increasing supply chain vulnerability. The combined end use importance and heightened supply risk of lithium make this lightest metallic element a critical commodity to the USA. To mitigate this supply risk, the US Geological Survey is actively assessing lithium deposits in the USA. Herein, we detail an assessment for lithium-mineralized pegmatites in the US northern Appalachian Mountains. Permissive tracts were generated by cross-referencing tectonic and geologic maps and mineral occurrence data with mappable criteria derived from generalized and region-specific lithium pegmatite ore deposit models; tracts were then ranked as having high, medium, or low permissibility. Available geophysical and geochemical data were found to be of minimal utility for this deposit type at the scale of the assessment. The number of undiscovered deposits were estimated and integrated into probabilistic simulations, which included an expanded and updated global grade and tonnage model of pegmatite-hosted lithium ore. The estimated total amount of undiscovered resources for the northern Appalachian Orogen has a median value of 1,410,000 metric tons of Li 2 O when considering moderate correlation across sub-regions. At a confidence level of 90%, a resource of at least 90,000 metric tons of Li 2 O remains undiscovered, and at a 10% confidence level, a resource of as much as 7,380,000 metric tons Li 2 O remains undiscovered. After applying an up-to-date economic filter to convert median contained lithium to recoverable material, a correlated total of 900,000 metric tons of Li 2 O may be economically extractable, equating to enough Li 2 O to provide the current annual US lithium supply deficit (presently obtained through net imports) for 127 years at 2025 rates of apparent consumption. This period of provision will inevitably shorten with projected increasing consumption rates, emphasizing that further research could be completed to better delineate regions of high lithium resource potential and support exploration and domestic production.

Connecticut, Delaware, Maine, Massachusetts, New H↗

USGS2024

How quickly do oil and gas wells “Water Out”? Quantifying and contrasting water production trends

Water production from petroleum (oil and natural gas) wells is a topic of increasing environmental and economic importance, yet quantification efforts have been limited to date, and patterns between and within petroleum plays are largely unscrutinized. Additionally, classification of reservoirs as “unconventional” (also known as “continuous”) carries scientific and regulatory importance, but in some cases the distinction from "conventional" wells is unclear. Using water, oil, and gas production data, we calculated a set of quantitative metrics that elucidate trends in the water-to-petroleum ratio over the life of each producing well. The percent growth of the water-to-petroleum ratio quantifies the degree to which a well “waters out” over time; values calculated for 153,900 wells in 18 oil and gas plays show generally much higher values for conventional wells than for continuous/unconventional wells. Analysis of the percent growth along with the slope and median metrics reveals greater variation between conventional plays and between continuous (unconventional) plays than previously recognized. Further, an example from the Bakken Formation in the Williston Basin, USA, illustrates that, within a single play, the metrics provide insight into spatial variation of water production trends, as influenced by geology and reservoir characteristics. By quantifying the variability of water production trends within individual plays and between plays, including differences between conventional and continuous (unconventional) plays, these results provide a more nuanced view of water production from oil and gas wells than has previously been possible and they illustrate the degree to which water management considerations vary spatially and temporally.

Natural Resources Research↗