Geology Reports⌕ Search
Home/Archive/USGS

USGS · 70259685

Cathodoluminescence imaging and spectrometry of a jadeite microbeam reference crystal: Detection of Ce3+

Thomas Lameris·Heather A. Lowers·Scott A. Wight·Edward P. Vicenzi
View original source ↗Export metadata ↓

Abstract

Options for selecting a high Na concentration mineral for instrument calibration that are suitably stable under the electron beam are limited [ 1 ]. NaCl (approximately a mass fraction of 39 % Na) is not practical for use alongside other embedded and polished materials in a mounted block of standards. While albite (NaAlSi 3 O 8 ; approximately a mass fraction of 8 % Na) represents a typical choice for some microanalysts, it may be subject to time dependent signal intensity issues, such as those observed for Na and other cations during analysis of hydrous glasses [ 2 ]. Near endmember jadeite pyroxene (NaAlSi 2 O 6 ; approximately mass fraction of 11 % Na) represents a desirable option for calibration given its relatively large concentration of Na and insensitivity to electron beam radiation with respect to X-ray output. Despite these desirable characteristics, jadeites have been shown to contain complex microstructures as the result of intracrystalline zoning [ 3 , 4 ], and the impact of chemical inhomogeneity within mineral standards and natural glasses has been documented [ 5-7 ]. In this study, a commercially obtained jadeite crystal (source location “China”) was studied to assess its microscale uniformity using a suite of microbeam methods, including dispersive red-green-blue multispectral cathodoluminescence imaging (CL RGB ), hyperspectral CL imaging spectrometry, energy dispersive X-ray spectrometry (EDS), SEM-based micro-X-ray fluorescence (μXRF), and wavelength dispersive X-ray spectrometry (WDS).

Explore related subjects

Microscopy and MicroanalysisArticle

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Thomas Lameris, Heather A. Lowers, Scott A. Wight, Edward P. Vicenzi. 2024-07-24. Cathodoluminescence imaging and spectrometry of a jadeite microbeam reference crystal: Detection of Ce3+. https://doi.org/10.1093/mam%2Fozae044.012

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2024

Compositional and structural mapping of Northwest Africa 15507 angrite

Angrite meteorites represent interesting sampling of planetary crustal environments. Quench-textured angrites with strong crystal zoning originated from the shallow surface region, with evidence of reducing conditions during solidification. Plutonic angrites have more coarse-grained igneous and metamorphic textures with comparatively less zoning and are interpreted as having equilibrated at greater depth. Plutonic angrites contain the minerals magnetite Fe 3 O 4 comprised of Fe 2+ and Fe 3+ , and rhönite, where Fe 3+ is required by inspection of mineral stoichiometry. NWA 15507 is a plutonic angrite with a microgabbroic texture (mean grainsize ∼1.4 mm) composed of zoned Al-Ti-augite, Ca-bearing olivine, anorthite, with accessory kirschsteinite, rhönite, hercynite, low-Ni kamacite, merrillite, Ti-free magnetite and troilite [ 1 ]. Rhönite analyzed by electron-probe microanalysis (EPMA) has the formula Ca 2.04 (Mg 0.32 Fe 2+ 4.25 Fe 3+ 0.47 Ti 0.33 Al 0.61 )(Si 3.74 Al 2.26 )O 20 , where Fe 3+ was estimated by stoichiometric analysis. During preliminary cathodoluminescence (CL) analysis, complex subgrain and oscillatory zoning was observed in the anorthite. In this study we use a combined approach of electron probe microanalysis (EPMA), cathodoluminescence (CL), electron-backscatter diffraction (EBSD), and laser ablation inductively-coupled plasma mass spectrometry (LA-ICP-MS) to further investigate the anorthite and distribution of Fe 3+ in NWA 15507.

Microscopy and Microanalysis↗
USGS2024

Correlating quantified cathodoluminescence spectra in jadeite with micro-scale color measurements in visible-near infrared reflectance spectrometry

Cultures throughout history have valued jadeite jade (hereinafter jade), a natural material assemblage composed predominately of the NaAl endmember pyroxene, jadeite (NaAlSi 2 O 6 ) that is prized for its mechanical properties and enticing coloration [ 1 , 2 ]. The geological setting for the formation of jadeite-rich rocks and associated complex geochemical phenomena is well documented in the literature [ 3-5 ]. Unlike single crystal gems, jade often contains a mixture of colors, but the stone is perhaps best known for exhibiting a range of green hues from pale green to blue green, and to deep green [ 1 , 6 ]. Efforts to classify jade color include qualitative matching to a set of reference color tiles, and less commonly, use of a more quantitative set of color perception values first established by International Commission on Illumination’s (CIE 1931) color space, which includes values for light-dark luminance level (L*), a green-red vector (a*), and a blue-yellow vector (b*) [ 7 , 8 ]. Two principal mechanisms have been identified as the cause of green coloration in jadeite: 1) the chemical state of impurity Fe, either 2+ or 3+, and 2) minor to trace Cr in the crystal structure [ 9 , 10 ]. Previous studies have associated Cr 3+ with cathodoluminescence (CL) spectral features in jadeite using point spectrometry, with more recent connections made via 2D CL spectrum imaging [ 11-13 ]. In this effort, we are seeking to establish whether Cr impurities are correlated with green coloration in jadeite using micro-scale (≤110 μm) visible-near infrared (VIS-NIR) reflectance spectrometry.

Microscopy and Microanalysis↗
USGS2021

Approach for quantifying rare Earth elements at low keV

The challenges of analyzing bastnaesite (REECO3F) and hydroxylbastnaesite (REECO3OH) include beam sensitivity, quantification of light elements in a heavy element matrix, the presence of elements that cannot be analyzed with EPMA (H), and the use of x-ray lines whose physical constants are not well known. To overcome some of these challenges, Ca, La, Ce, Pr, Nd, and Sm were analyzed at 15 keV accelerating voltage and the light elements (C, O, F) were analyzed at 7 keV accelerating voltage. This approach is ideal for samples that are homogeneous within the volume analyzed. However, for the bastnaesite of interest, this solution is unsatisfactory as backscattered electron imaging reveals chemical variations at scales of less than 1 m (fig. 1). Monte Carlo simulations and wavescans of the REE M family of x-rays were evaluated to determine the best analytical approach. Monte Carlo simulations using Casino v2.42 were ran on a substrate of CeCO3F with a density of 5.00 g/cm3 at 15 keV and 7 kCV accelerating voltage. Depth distribution curves, φ(ρz), reveal x-ray generation at 15 keV for the Ce L shell x-rays approaches 1.0 m whereas the depth of Ce M shell x-ray generation at 7 keV is less than 0.4 m. Similarly, the K shell x-ray generation depth for C, O, and F at 7 keV is also less than 0.4 m. These simulations demonstrate an accelerating voltage of 7 keV or less and use of the REE M x-rays is necessary to acquire chemical information from the same volume of material for the light and heavy elements. Bastnaesite contains all REE and therefore one must consider the energy of the highest x-ray line of interest, namely the Lu M at 1.83 kV, to achieve an overvoltage (Eo/Ec) of over 2. Bastnaesite is also an insulator and requires a conductive coating, therefore 7 keV was used to avoid contributions of the coating material to the analysis given the above constraints. The USNM REE phosphate standards, Edinburgh REE glasses, CeO2, LaB6, and the metals of Sm, Dy, Gd, Er, and Yb were selected to evaluate the peak overlaps of the M family x-ray lines. The materials were coated with ~ 5nm iridium with a Leica ACE600 prior to analysis. Full spectrometer wavescans were collected at 7 keV accelerating voltage, 50 nA beam current, and 20 um beam diameter on a JEOL 8530F Plus using TAP and TAPL crystals. The step size was 0.109 mm along the length of the spectrometer with a dwell of 3 seconds at each step. M and M lines are broad and not individually resolved for the light REE but become more separated and sharper with increasing atomic number. M and M lines for each REE are also present across the spectrometer range further complicating peak interference corrections. The peak positions and overall shape for the Ce M and M lines vary with the coordination of the element. Significant shifts in position and shape were not observed when comparing the Ce M peaks of CeO2 and CePO4. Similar results were seen when comparing the available REE metal to the phosphate (Sm, Dy, Gd, Er, Yb). These wavescans suggest the use of the M or M lines if matrix matched standards are not available.

Microscopy and Microanalysis↗