Geology Reports⌕ Search

USGS · 70250964

Bedform distributions and dynamics in a large, channelized river: Implications for benthic ecological processes

Abstract

Sand bedforms are fundamental habitat elements for benthic fish in large, sand-bedded rivers and are hypothesized to provide flow refugia, food transport, and ecological disturbance. We explored bedform distributions and dynamics in the Lower Missouri River, Missouri, with the objective of understanding the implications of these features for benthic fish habitat, particularly for the endangered pallid sturgeon (Scaphirhynchus albus) and shovelnose sturgeon (Scaphirhynchus platorynchus) during their early life stages. We mapped bathymetry in a 3-kilometer-long reach of the highly engineered Lower Missouri River 22 times over a three-year period from 2019-2021 using a multibeam echosounder. Surveys included precise water surface and bed elevations over discharges ranging from 1,360-8,550 cubic meters per second. This included weekly surveys during a large flood event with a peak of 9,290 cubic meters per second in the spring and summer of 2019. Velocity was mapped with an acoustic Doppler current profiler during 11 of the 22 multibeam surveys. The dataset illustrates how bedforms are distributed in a typical Missouri River reach and how they evolve with changes in discharge. We measured a variety of bedform characteristics, including height, length, lee-slope angle, and crest orientation, and examined their relationship to larval sturgeon catch in the reach in 2020 and 2021. Bedform shapes are controlled by depositional environment and discharge and range in size from less than a meter in wavelength and amplitude to greater than 4 meters high and 75 meters long and generally have low angle lee-slopes. Small dunes were located in lower velocity regions on the inside of a bend and behind wing-dikes, as well as superimposed on larger dunes. Larger dunes were generally located in the channel thalweg and were associated with higher flow velocities. However, bedform size did not necessarily scale with discharge over the course of the 2019 flood, possibly due to sediment supply limitations and hysteresis effects. Changes in bedform size over the course of the flood event were most pronounced in the thalweg; less change in bedform size occurred behind wing dikes on the inside of channel bends, indicating some degree of habitat stability. Despite rarely getting caught in the thalweg, larval sturgeon drift in the thalweg until they are intercepted into off-channel habitats in wing dike fields, where they are caught in much higher numbers. Bedform orientations were affected by flow expansion around wing dikes, indicative of the role of wing dikes in influencing exchange of material between the thalweg and channel margins. Increased understanding of bedform distributions and dynamics will inform future sampling and habitat restoration designs for larval pallid sturgeon and contribute to increased understanding of their influence on benthic ecological processes.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Caroline M. Elliott, R. B. Jacobson, Bruce Call, Maura O Roberts. 2023. Bedform distributions and dynamics in a large, channelized river: Implications for benthic ecological processes. https://pubs.usgs.gov/publication/70250964

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Authoritative knowledge infrastructure for GeoAI: Implications for scientific spatial data providers

Geospatial Artificial Intelligence (GeoAI) increasingly relies on automated analysis of authoritative geospatial data, exposing limitations in data infrastructures originally designed for simple dissemination rather than for knowledge-driven use. From the perspective of scientific spatial data providers, the challenge is enabling GeoAI responsibly while retaining semantic clarity, provenance, reproducibility, and governance. This short paper (i) examines how GeoAI exposed limitations within existing geospatial data infrastructures, and (ii) identifies provider-side requirements for an authoritative knowledge infrastructure. Drawing on GIScience, scientific workflow, and operational AI literature, the paper outlines implications for national mapping organizations that seek to support advanced analytics without jeopardizing scientific rigor or stewardship responsibilities.

Conference Paper↗

Springs of the Catskill Mountains: A conduit flow system in predominantly siliciclastic strata

The Catskill Mountains of New York state are composed of thick sequences of interbedded mudstone, sandstone, and siltstone that are intercalated with thin beds of paludal limestone and calcareous mudstone. Sandstones often contain rip-up clasts of calcareous material at their bases and contain minor amounts of carbonate cement throughout their mass. This minor amount of calcareous material weathers out to produce thin zones of solutional porosity and permeability integrated within perched aquifers that feed perennial hillslope springs. Solutional features are evident within thin carbonate lenses and along fractures in sandstones, occasionally resulting in explorable cave-sized conduits. This study focuses on the behavior of bedrock springs and seeps in the headwaters of the Neversink River basin above the Neversink Reservoir. Bedrock springs are numerous throughout the Catskill Mountains and serve to provide baseflow to the headwater streams that tends to be more persistent during dry times than other baseflow sources. We observed dissolution-influenced conduits within the bedrock, and suffosional conduits within unconsolidated materials. Continuous water temperature at six springs was monitored at hourly intervals from May to October 2022 to investigate the thermal response of groundwater to daily and seasonal changes in air temperature along with event-based meteorological events. Temperature monitoring was augmented at some springs with time-lapse photography to evaluate persistence of flow. The thermal responses of springs to precipitation events were highly variable across sites, with some springs exhibiting flashy responses indicating a strong connection to the surface, while other springs showed muted or no thermal response to events. The seasonal thermal response also varied across sites having lag times of 23-48 days between peak air temperature and peak spring water temperature. The water temperatures and geochemical compositions of these bedrock springs support a conceptual model of multiple residence times, showing both event and seasonal groundwater storage within the conduit flow system that feeds the springs of the Catskill Mountains.

New York↗

Stability changes after weak layer collapse: Insights from an unexpected dataset

While conducting avalanche mitigation or traveling through the backcountry, avalanche professionals sometimes experience a "whumpf": a collapse-mode crack accompanied by surface cracking that does not produce an avalanche. These whumpfs are a clear warning sign of instability in the surrounding terrain. But assessing the collapsed slope itself, if it is steep enough to avalanche, carries much more uncertainty. Can slopes that whumpf and are steep enough to slide still avalanche? The answer to this question supports avalanche mitigators and ski guides in assessing whether to open such slopes. Previous research on collapsed slopes is limited to one study conducted before tests that estimate crack propagation propensity, such as the Propagation Saw Test (PST), were developed. This work showed that weak layer shear strength decreased immediately after collapsing and then increased over time. However, no research has examined crack propagation propensity after a whumpf. Studying propagation propensity is key for assessing how whumpfs immediately affect slope stability. To improve our understanding of changes in propagation propensity following weak layer collapse, we conducted PSTs on a test slope in the hours and days after an unexpected collapse occurred on a layer of surface hoar. Two PSTs at our study site three days prior to this collapse provided an estimate of weak layer propagation propensity. PST cut lengths decreased immediately following the collapse, suggesting that the collapse increased the propagation propensity. However, over the next 4-5 hours, PST cut lengths steadily increased at our site, likely due to ongoing sintering and strengthening in the collapsed weak layer. By the end of day two, we were no longer able to initiate propagation, suggesting substantial stabilization of the weak layer. Our results support prior findings and observations suggesting that slopes may remain capable of producing avalanches immediately after a collapse but likely stabilize over the next day or two. Although this research does not provide answers about precisely when a slope becomes stable after a collapse, it does highlight uncertainties in our understanding and interpretation of the stability of slopes that have whumped.

Montana↗