Evaluation of nearshore bathymetric inversion algorithms using camera observations and synthetic numerical input of surface waves during storms

Elora Oades; Ryan Mulligan; Margaret L. Palmsten

doi:10.1016/j.coastaleng.2023.104338

Home/Archive/USGS

USGS · 70249193

Evaluation of nearshore bathymetric inversion algorithms using camera observations and synthetic numerical input of surface waves during storms

Elora Oades·Ryan Mulligan·Margaret L. Palmsten

View original source ↗Export metadata ↓

Abstract

Nearshore bathymetry is difficult to measure using survey methods when wave heights approach the breaking limit. Remote sensing using digital cameras offers a way to observe the surf zone and calculate water depths based on phase speed but comes with its challenges of potentially noisy data that can introduce error into estimates of frequency and wavenumber used in phase speed calculation. This study investigates the robustness of a new version of a bathymetric inversion algorithm (cBathy, version 2.0) in moderate to energetic wave conditions by comparing depth estimates from timeseries’ of pixel intensity with depth estimates from synthetic water level data. The synthetic data are generated by the phase-resolving numerical model, SWASH, and optical data were collected during a field experiment in 2015. Model results from SWASH computed with known bathymetry are used as input to cBathy, and depth estimates are compared to nearshore surveys. Argus camera observations are also used as input to cBathy for the same times as the SWASH simulations. The SWASH simulations resolve breaking waves and do not include (optical) changes to the relation between water surface slope and pixel intensity, termed modulation transfer function, that occur during wave breaking, enabling better estimates from bathymetric inversion algorithms near morphologic features like sand bars. The results indicate that improvements result from eliminating of disruptions to the modulation transfer function caused by wave breaking and residual foam. We show that the use of synthetic wave data is a valuable means of isolating errors in bathymetric inversion algorithms.

Explore related subjects

Coastal Engineering Article

Source-reported bounding extent: 36.09324415562598° to 36.31922233148438° latitude; -75.88936314340529° to -75.61754120043011° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Elora Oades, Ryan Mulligan, Margaret L. Palmsten. 2023. Evaluation of nearshore bathymetric inversion algorithms using camera observations and synthetic numerical input of surface waves during storms. https://doi.org/10.1016/j.coastaleng.2023.104338

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

Morphodynamic controls on the performance of dune-based coastal flood mitigation under sea-level rise

Dune-based adaptation is increasingly used as a nature-based solution for coastal flood mitigation, yet many assessments rely on hydrodynamic-only approaches that treat beach and dune morphology as static, neglecting storm-driven erosion that can degrade dune performance during extreme events. This study develops a process-based modeling framework coupling extreme value analysis of regional wave climate with XBeach surfbeat simulations to evaluate coastal flooding, erosion, and dune performance across three time horizons (2025, 2055, 2085) and four storm return periods (5, 20, 50, and 100 years) at two contrasting sites in Santa Cruz County, California. At Santa Cruz Beach, flood extent increases at an accelerating rate with sea-level rise (SLR) for a given return period, while higher return period storms exhibit diminishing incremental increases under fixed SLR conditions. Storm-scale morphodynamic feedbacks reduce predicted flood extent by up to 32.4% through profile adjustment and nearshore bar formation. Dune effectiveness is strongly regime-dependent, reducing flooding by up to 60% under collision-regime conditions but declining rapidly as the system transitions toward overwash and inundation under stronger storms and late-century SLR. Comparison of static and erodible dune representations shows that flood estimates are not consistently conservative, with differences reaching up to 54.3% depending on storm intensity and time horizon. At Capitola Beach, limited accommodation space and water-level-dominated dynamics collectively constrain morphodynamic adjustment, render the site near its inundation capacity under present-day conditions, and result in near-complete dune collapse and limited flood mitigation across all scenarios. These findings highlight the importance of site-specific regime evaluation, process-based morphodynamic modeling, and adaptive management when assessing dune-based adaptation under rising sea levels.

California↗

USGS2026

HyFlood: A surrogate-model-based framework for compound coastal flooding

Compound coastal flooding is a major threat to low-lying coastal regions and is expected to intensify under future climate change projections. However, modeling the joint interaction of waves, storm surge, tides, and rainfall remains computationally demanding, limiting the development of fast and reliable forecast tools. Here we present HyFlood, a hybrid statistical-numerical downscaling framework capable of computing and mapping high-resolution compound flood hazards while substantially reducing the computational cost compared with fully process-based hydrodynamic modeling. HyFlood combines statistical sampling and selection algorithms with a cascade of reduced-complexity surrogate models that emulate nearshore wave transformation, surf-zone hydrodynamics, and coastal, fluvial, and pluvial flooding. The surrogate models employ machine-learning and regression algorithms applied to a low-dimensional representation of the flooding outputs, obtained through statistical dimensionality reduction. The framework is demonstrated in southern O'ahu, Hawai'i, a region exposed to elevated sea levels driven by tides, waves, and storm surge along with frequent precipitation-driven flash flooding. Validation of the surrogates against the physics-based model outputs demonstrates that HyFlood accurately reproduces daily maxima of spatially distributed flooding depths. This hybrid approach offers a scalable and efficient tool to better quantify how changes in flooding drivers translate into hazard and impact assessments, and to support compound-flood risk assessments and climate-change adaptation planning.

Hawaii↗

USGS2025

Evaluating five shoreline change models against 40 years of field survey data at an embayed sandy beach

Robust and reliable models are needed to understand how coastlines will evolve over the coming decades, driven by both natural variability and climate change. This study evaluated how accurately five popular ‘reduced-complexity’ models replicate multi-decadal shoreline change at Narrabeen-Collaroy Beach, a sandy embayment in Sydney, Australia. Measured shoreline positions derived from approximately monthly field surveys were used for 20-year calibration and 20-year validation periods. The models performed similarly on average but with large variability between transects. The set-up of several models was modified to compensate for their sensitivity to imperfect input wave data, and further site-specific improvements were identified. Capturing interannual to decadal-scale variability in cross-shore and longshore dynamics at this site was challenging for all five models. Models appeared to aggregate key processes at this timescale into parameter values rather than representing them directly. This suggests time-varying parameters or changes to model structure may be necessary for decadal-scale simulations.

Coastal Engineering↗