On the scale-dependence of fault surface roughness

Nicholas M. Beeler

doi:10.1029/2022jb024856

Home/Archive/USGS

USGS · 70247741

On the scale-dependence of fault surface roughness

Nicholas M. Beeler

View original source ↗Export metadata ↓

Abstract

Defining roughness as the ratio of height to length, the standard approach to characterize amplitudes of single fault, joint and fracture surfaces is to measure average height as a function of profile length. Empirically, this roughness depends strongly on scale. The ratio is approximately 0.01 at a few mm but 10× smaller at a few tens of meters. Surfaces are rougher at small scales. However, these conclusions are metric-dependent. If instead height is averaged over wavelength, roughness is nearly Brown spatial noise, having almost scale-independent apparent surface height to wavelength ratio. The small deviation from scale-independence is of the opposite sense than found using the standard metric; surfaces are slightly rougher at long wavelengths. Some natural surfaces may be Brownian within the measurement uncertainties. These contradictions are curiosities of surfaces that have Hurst exponents between 0.5 and 1, as natural fault surfaces do. The wavelength-based analysis of roughness and how it changes with scale are straight-forward; a normalized Fourier transform approximately preserves amplitude and its scale dependence in the wavelength domain. Among the conclusions from reconsideration of scale dependence are that the scale dependence is weak and much smaller than that of other fault and shear zone properties. Background and aftershock seismicity, jogs and step-overs indicate strong localization (smoothing) with slip and scale. The lack of strong scale dependence to surface roughness suggests it is not the dominant control on brittle shear zone evolution.

Explore related subjects

JGR Solid Earth Article

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Nicholas M. Beeler. 2023-02-04. On the scale-dependence of fault surface roughness. https://doi.org/10.1029/2022jb024856

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

Fully contained laboratory earthquakes: The effect of asperity aspect ratio and free surfaces

Corner frequency ( f c ) and seismic moment ( M 0 ) are key parameters derived from seismic signals that are used to characterize earthquake stress drop, rupture area, and slip. These parameters are also affected by fault geometry and boundary conditions. However, the systematic study of these effects in laboratory settings has been challenging. This study presents laboratory earthquake experiments that examine how rupture dynamics are influenced by (a) the aspect ratio of rectangular PMMA velocity-weakening (VW) asperities surrounded by the Teflon velocity-strengthening (VS) patches, and (b) whether the sides of a VW asperity are confined with VS patches or are free surfaces. We found that increasing confinement by reducing free surfaces or increasing the VW asperity aspect ratio stabilizes fault slip, so that higher normal stress is required to transition from aseismic to seismic slip. Increased confinement and high aspect ratios also reduced M 0 and increased f c , both of which were determined from the radiated seismic waves. M 0 and f c were primarily controlled by the shorter dimension of the VW asperity. Analysis of high-frequency acoustic emission signals revealed that ruptures on high-aspect-ratio VW asperities propagated more unidirectionally, whereas ruptures on square VW asperities were more complex. Further, the high-aspect-ratio asperities were more likely to be eroded by surrounding VS regions while low-aspect-ratio asperities were more likely to rupture into the VS surroundings. These results demonstrate that both the confinement from surrounding stable areas and the geometry of the seismogenic patch can affect rupture nucleation, propagation, and seismic source characteristics.

JGR Solid Earth↗

USGS2026

Tectonic controls on volcanism and associated hydrothermal activity in a sediment-dominated mid-ocean ridge; Escanaba Trough

Mid-ocean ridges, the Earth's most extensive volcanic system, exhibit unique characteristics in sediment-dominant environments. Thick sediment cover insulates the crust and channels fluid along pathways that can lead to the formation of distinct crustal alteration patterns, exceptionally large mineral deposits, and specialized chemosynthetic ecosystems. This study presents an interdisciplinary investigation into the tectonics of the Escanaba Trough, a heavily sedimented axial valley at the southern Gorda Ridge in the Northeast Pacific Ocean. A primary challenge in such environments is overcoming the masking effect of thick sediments on basement structures that control magmatic and hydrothermal activity. We address this by employing three-dimensional (3D) magnetic modeling of high-resolution near-seafloor magnetic data collected by an autonomous underwater vehicle (AUV). The 2022 surveys with AUV Sentry provided data for 3D magnetic susceptibility models, refining our understanding of the geometry of sub-sediment laccoliths/saucer-shaped sills and hydrothermal alteration. In conjunction with a new 1:100,000 scale lithostratigraphic map, we outline the tectonic controls on the emplacement of Escanaba Trough's three main volcanic centers, characterize the geometry of its spreading segments, and provide volumetric data on the distribution of sub-sediment volcanism in the southern Gorda Ridge.

Escanaba Trough, Pacific Ocean↗

USGS2026

Structural evolution and slip rate variations through time of the Puente-Hills blind-thrust fault beneath Los Angeles: Implications for seismic hazard and folding kinematics

Using seismic reflection profiles, historical well logging data, and luminescence and radiocarbon ages, we determine a Pleistocene-Holocene slip history for the central, Santa Fe Springs segment of the Puente Hills blind-thrust fault (PHT), a major seismogenic fault situated beneath the urbanized Los Angeles metropolitan region. We analyze the geometry of correlative stratigraphic units in the forelimb and backlimb of the overlying growth-fold, the Santa Fe Springs anticline, and determine the uplift of seven age-correlative markers. Uplift measurements are converted to thrust displacements on the underlying PHT using a structural method laid out by Don et al. (2022, https://doi.org/10.1785/0120220048 ) that accounts for the geometry of the fault. These data indicate that deep thrust displacement on the PHT is partially consumed updip in the creation of a hanging-wall fault-bend fold, with forelimb growth strata recording <80% of the slip documented within the backlimb. Chronological data from growth strata yield age constraints for folding and faulting on the underlying PHT, providing a detailed incremental slip history derived from both the forelimb and backlimb folding for seven discrete growth horizons, spanning the past 1.4 million years. The resulting six incremental slip rates demonstrate that fault slip has varied through time from the middle Pleistocene to the Holocene. Moreover, these results reveal synchronous acceleration of both the central, Santa Fe Springs and western, Los Angeles segments of the fault system since late Pleistocene time (after 200 ka) and slip rates of greater than 2 mm/yr on the downdip, backlimb, fault-ramp below the anticline.

California↗