Geology ReportsSearch

USGS · 70247400

Artificial Recharge — State of the Art

Abstract

The largest potential reservoir for the storage of potable water is in the unsaturated zone. Use of this space for the storage and retrieval of potable water is a multifaceted problem which requires application of the best talent from the scientific community. Artificial recharge has many similarities to liquidwaste disposal through deep wells. In both, the problem is to place liquid in a permeable lithologic unit at an economic rate, to predict movement and the chemical reactions and physical changes that take place while the liquid is in the reservoir. Differences between the two operations are principally in the type of fluid injected and the ultimate objective. In artificial recharge the objective is to store and retrieve water of good quality; in waste disposal the objective is to store permanently water of objectionable quality. In both artificial recharge and liquid-waste storage, the nature of the storage must be known, particularly that of the unsaturated zone. The techniques of investigation for recharge and waste disposal are generally the same. Water commonly is recharged by surface spreading through basins or by induced recharge from adjacent streams and lakes or through injection wells. Research in recharge through basins has been dominated by mathematical models based on idealized conditions and empirical relations, derived by experimental sequencing of recharge operations, and operational controls in the pretreatment of recharge water. Recharge by injection wells has been undertaken in a variety of hydrologic environments. In Israel efforts have been directed toward the analyses of diffusion and dispersion of the injected water. Much research in the United States has been directed toward the movement of bacteria and organic matter through an aquifer and toward the chemical modeling of changes in recharged water as it moves. Much more research is needed on the basic properties of aquifers, particularly in the unsaturated zone, and on all aspects of recharge-water quality. Research and the use of data produced are increasingly the responsibility of interdisciplinary teams which consider the geologic, hydraulic, and economic aspects of the system.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

R. F. Brown, D. C. Signor. 2006-07-06. Artificial Recharge — State of the Art. https://doi.org/10.1111/j.1745-6584.1974.tb03015.x

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Computing flow-field distortion coefficients from well-construction and formation properties

Direct measurements of groundwater velocity made with borehole flowmeters in screened wells must be compensated for the effects of flow-field distortion (also known as borehole acceleration). A theoretical equation developed by Drost et al. (1968) and simple inputs describing hydraulic properties of well construction and geologic formation were programmed into an Excel workbook to facilitate computation by groundwater-flowmeter users. Tables describing the physical and hydraulic properties for well constructions and gravel pack media are provided with an example to facilitate use of the workbook. Groundwater flowlines converge or diverge as they pass from a geologic formation, through a gravel pack and well screen. The extent of flowline convergence or divergence and the value of the flow-field distortion coefficient is related to the relative changes in hydraulic conductivity of the well screen, gravel pack, and geologic formation. Convergence or divergence is accompanied by acceleration or deceleration of groundwater. Direct measurements of groundwater velocity at the center of the monitoring well can be adjusted to provide a more accurate estimate of velocity in the formation by applying a correction for flow-field distortion. Variables required to compute the flow-field distortion coefficient include the hydraulic conductivity of the gravel pack, well screen, and the geologic formation surrounding the well screen; the borehole radius, and the inside radius and outside radius of the well screen.

Groundwater

Deep groundwater total dissolved solids mapping in the Dakota Group, Williston Basin, USA

Growing concern about the quantity of available freshwater around the world has led to interest in surveying groundwater total dissolved solids (TDS) below water well depths. Deep TDS has not been systematically mapped, and there is much to learn about the distribution and controls on deeper groundwater. In sedimentary basins across the United States, groundwater resources often overlie hydrocarbon resources, providing an opportunity to use borehole geophysical data collected for hydrocarbons to characterize groundwater and pore space resources. This study adapts a recently developed subsurface geostatistical and geophysical modeling approach to continuously map groundwater TDS, porosity, and temperature in the Dakota Group of the Williston Basin—an undercharacterized regional aquifer system overlying deeper hydrocarbon reservoirs. Groundwater TDS in the Dakota Group ranges from approximately 4800 to 26,900 mg/L. TDS patterns are stratified with higher TDS in the lower and upper Dakota Group, and relatively lower TDS in the middle Dakota Group. The lower TDS in the middle zone may represent a preferential regional flow path for lower-TDS meteoric recharge from the west. The alternating pattern of TDS may also be evidence of higher-TDS inflows into the Dakota Group from underlying and potentially from overlying aquifers. Porosity is lower near the center of the Williston Basin and tends to be higher to the east, which may be related to grain size distributions. The new regional TDS and porosity modeling serves as a quantitative reference for water users and provides supporting evidence for hypotheses on Dakota Group recharge.

Montana, North Dakota, South Dakota