Geology ReportsSearch

USGS · 70238071

Bulk and intramolecular carbon isotopic compositions of hydrocarbon gases from laboratory pyrolysis of oil shale of the Green River Formation: Implications for isotope structures of kerogens

Abstract

Evaluation of intramolecular isotope distributions within organic compounds can provide important insights into gas formation processes and structural properties of gas-generating precursors, such as kerogen, bitumen, and oil, in natural reservoirs. Until recently, little has been known about the intramolecular isotope distributions within kerogens. In this study, we conducted systematic pyrolysis experiments of gas generation from a lacustrine oil shale of the Eocene Green River Formation under hydrous and anhydrous conditions (equivalent maturity or Easy %R o : 0.76 to 3.27 at 310 to 480 °C for 3 to 50 days), measuring gas yields and compositions, as well as bulk and position-specific (PS) carbon isotope compositions. Gas generation processes were investigated in combination with kinetic Monte Carlo (kMC) simulations on a model Type I kerogen based on the chemical structures of oil shale of the Green River Formation. The comparison of our experimental results with kMC modelling indicates a series of β-scission, radical isomerization, and recombination reactions better represent the bulk isotope compositions of propane in the pyrolysis of the oil shale of the Green River Formation, but the ΔC c-t (= δ 13 C cen – δ 13 C ter ) values of propane at Easy %R o > 1.5 can be better simulated by a simple combination of propyl groups with H radicals. Combining our previous works on marine shale of the Woodford Formation and Springfield Coal Member of the Carbondale Formation, PS carbon isotopes of propane indicate that in the lacustrine shales of the Green River Formation and the marine Woodford Shale, propane is sourced from C C bond cleavage, while C O bond cracking generates propane from coal at the initial kerogen cracking stage. At high maturity, the differences of late-stage propane production among the source rocks lead to the different bulk and PS C kinetic isotope effects of propane. Our findings suggest that the δ 13 C at the terminal position of propane precursors is likely up to 3.6‰ higher than at the central position in the Green River kerogen, while they are similar in the marine shale of Woodford Formation. In addition, the δ 13 C at the central position of propyl groups attached to heteroatom compounds is relatively more positive in the Springfield Coal Member of the Carbondale Formation than in Green River kerogen. A comparison of intramolecular C isotopes of propyl groups in the kerogens with their bulk δ 13 C, based on the PS δ 13 C of early-generated propane, contributes to our understanding of heterogeneities of isotopic structures of sedimentary organic matter.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Xiaoqiang Li, Justin E. Birdwell, Juske Horita. 2022. Bulk and intramolecular carbon isotopic compositions of hydrocarbon gases from laboratory pyrolysis of oil shale of the Green River Formation: Implications for isotope structures of kerogens. https://doi.org/10.1016/j.coal.2022.104141

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Relating systematic molecular and textural properties of graptolite pyrolyzed via gold tube hydrous pyrolysis: Implications for thermal proxies in lower Paleozoic marine shales

A series of gold tube pyrolysis experiments (72 h, 300–550 °C, 50 MPa) conducted on a graptolite-rich lower Paleozoic marine shale generated pyrolysis residues for a comprehensive evaluation of the molecular and structural variability of three types of graptolite periderm. Organic petrology, Raman spectroscopy, and field emission scanning electron microscopy (FE-SEM) with energy dispersive spectroscopy (EDS) were combined to evaluate the thermal evolution process. The three types of graptolite periderm, namely granular, non-granular, and nodular graptolite, were analyzed by Raman spectroscopy wherein point measurements were obtained after the maceral was identified and the location verified by organic petrology. Distinct thermal evolution pathways among non-granular, granular, and nodular graptolite periderms were recorded. The evolution patterns of the Raman parameters, particularly D1 and G bands, highlight the differences in geochemical composition of the graptolite periderm types and the alteration of molecular structure with increasing thermal maturity. Raman parameters D1 (position of the D1 peak), G-FWHM (full width at half maximum of the G peak), and ratios D1-FWHM/G-FWHM (full width at half maximum of the D1 peak ratioed to G-FWHM) and A D1 /A G (ratio of D1 and G peak intensities) showed effectiveness in assessing thermal maturity. Bireflectance with increasing gold tube pyrolysis temperature followed a hierarchy: non-granular > granular > nodular, reflecting different molecular alignment intensities. Qualitative FE-SEM evaluation showed that fine-grained mineral inclusions (primarily Fe-sulfide as determined via EDS) were associated with the graptolite populations, with granular graptolite containing greater amounts of coarser-grained (e.g., ∼300–1400 nm) mineral inclusions relative to non-granular and nodular graptolite, which contain finer-grained (e.g., ∼100–200 nm) inclusions difficult to resolve with optical microscopy. These findings are investigated to highlight the mechanisms that drive organic matter evolution within graptolite during thermal maturation, as well as to explore some of the limitations of using spectroscopic parameters as thermal maturity proxies.

International Journal of Coal Geology

Component identification of solid biomass fuels using reflected light microscopy: Interlaboratory study 2

As nations transition toward sustainable energy systems , biomass has become a vital component of global energy portfolios. Derived from organic materials such as wood, agricultural residues, forestry byproducts, and organic waste, biomass is a renewable energy source with significant environmental and economic benefits. Responsible biomass energy production can improve waste management, reduce emissions of greenhouse gases, and mitigate environmental pollution. However, as the diversity of biomass-derived fuels increases, robust quality assessment methods are essential to ensure their efficiency, safety, and minimal environmental impact. Reflected light microscopy (RLM) is one such technique with the potential to complement conventional physico-chemical analyses by enabling a rapid identification of material constituents and impurities. To refine this methodology and evaluate the reproducibility of solid biomass component identification using RLM, an interlaboratory study (ILS) was conducted. The study involved the recognition of 58 components across 45 photomicrographs, with the participation of 65 scientists and students from 25 countries. The participants faced high difficulty identifying some of the marked components, and as a result, the percentage of correct answers ranged from 19.0 % to 98.3 %, with an average correct identification rate of 62.7 %. The most challenging aspects of the identification process included distinguishing between woody and non-woody (agro) biomass, accurately identifying petroleum-derived materials, and differentiating agro biomass from inorganic matter. The results suggest that while RLM is an important tool for characterizing solid biomass, further development of methodology guidelines and training are necessary to enhance its effectiveness. Future research should prioritize preparing detailed, image-rich, microscopic morphological descriptions of biomass fuel components, which could improve the accuracy and reliability of using RLM in biomass fuel characterization.

International Journal of Coal Geology

Confocal laser-scanning microscopy (CLSM)-based thermal maturity of Tasmanites and progress in standardization of fluorescence microspectrometry

Evaluation of thermal maturity in vitrinite-free or vitrinite-deficient sediments via fluorescence microspectrometry can provide relevant information related to petroleum exploration and thermal history assessment. However, variation in spectral fluorescence properties of alginite macerals with increasing thermal maturity is largely underexplored. Here, authors of this study have applied confocal laser-scanning microscopy (CLSM) in conjunction with fluorescence microspectrometry to a maturity series of marine Upper Devonian Tasmanites algae from the Ohio Shale (Huron Member) and a single sample from the Marcellus Formation of the Appalachian Basin. Spectral fluorescence properties of Tasmanites were evaluated in relation to orientation, measurement location, and the number of measurements per sample, and were compared to published literature. Emission spectra of Tasmanites from continuous wave laser excitation (405 nm) were acquired from sections perpendicular and parallel to bedding and at different positions within individual Tasmanites bodies. The results showed a progressive red-shift in emission maxima (λ max ) in a large sample sized maturity series ( N = 19), e.g., 493 to 578 nm for the perpendicular section at middle position. Further, blue-shifted apex and mineral-adjacent positions within sections perpendicular to bedding were observed, with the latter being reported here for the first time. While blue-shift at apex positions can be attributed to mechanical deformation-induced reorientation of photoselected fluorophores, the blue-shifted mineral-adjacent positions could result from strain loading and development of a plastic deformation region at the mineral contact zone with Tasmanites . A decrease in standard deviation with increasing number of measured emission maxima is well-observed, and 15 to 20 individual measurements per sample appears sufficient for low standard deviation and coefficient of variance. CLSM-derived thermal maturity parameters indicated that a moderate positive correlation of red/green quotient (Q 650/500 ; R 2 = 0.67) with solid bitumen reflectance (BR o in %) exists. For reproducible results, the determination of λ max and Q 650/500 should be conducted exclusively in the middle position at perpendicular and parallel sections of the polished whole-rock pellets, where the lowest standard deviation in measurement was observed. These results strengthen the suitability and relevance of the CLSM technique in thermal maturity studies of dispersed organic matter (DOM) and contribute to the standardization of fluorescence microspectrometry methods in organic petrology investigation.

Kentucky, Ohio, Virginia, West Virginia