Geology ReportsSearch

USGS · 70226754

Quartz gabbro and anorthositic gabbro: Markers of offset along the San Andreas fault in the California Coast Ranges

Abstract

Large-scale lateral movement on the San Andreas fault zone is suggested by the distribution of gabbroic rocks that may be slivered remnants of oceanic crust. Distinctive and unusual hornblende quartz gabbro and anorthositic gabbro that are virtually identical both petrographically and chemically are exposed at Logan and Gold Hill in the Coast Ranges along the San Andreas fault. The hornblende quartz gabbro is made up of labradorite to bytownite plagioclase, hornblende, and quartz, with very minor biotite and pyroxene, and accessory metallic opaques and apatite. The coarse-grained anorthositic gabbro with anorthositic layers and associated gneiss is made up mainly of labradorite to bytownite plagioclase, hornblende, lesser clinopyroxene, and, locally, orthopyroxene. The present 100 mi of separation between these two gabbro bodies is probably due to displacement along the San Andreas fault of what was originally one gabbro mass. Somewhat similar quartz gabbro and anorthositic gabbro associated with ultramafic rocks near Eagle Rest Peak in the San Emigdio Mountains may represent a source for the Logan and Gold Hill slivers. This suggests a minimum right-lateral movement of about 200 mi on the San Andreas fault zone. Anorthositic gabbro clasts from Cretaceous conglomerate in the Gualala area have strong resemblance to gabbroic rocks at Logan, Gold Hill, and Eagle Rest Peak and speculatively suggest 350 mi of right-lateral movement on the fault zone. It is tentatively suggested that the gabbro clasts of Gualala may have been shed from a large area of exposed gabbroic oceanic crust, pieces of which occur as fault slivers at Gold Hill and Logan. It is further suggested that the Eagle Rest Peak locality may be a relatively in-place exposure of this gabbroic oceanic crust that lies near a continental-oceanic interface. This interface, thought to represent a fossil subduction zone between Franciscan and Sierran basements, appears to be overlain depositionally by Eocene sedimentary rocks. If these Eocene deposits do “seal over” the possible subduction zone, it suggests that movement on such a zone ceased before the Eocene deposition, and that the new and different pattern of right-lateral movement on the San Andreas fault zone probably began sometime later.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 32.52828936482526° to 40.49709237269567° latitude; -124.38720703124999° to -115.13671875° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Donald C. Ross. 1970. Quartz gabbro and anorthositic gabbro: Markers of offset along the San Andreas fault in the California Coast Ranges. https://doi.org/10.1130/0016-7606(1970)81%5B3647%3Aqgaagm%5D2.0.co%3B2

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Uncertainties in slip-rate estimates for the Mission Creek strand of the southern San Andreas fault at Biskra Palms Oasis, southern California

This study focuses on uncertainties in estimates of the geologic slip rate along the Mission Creek strand of the southern San Andreas fault where it offsets an alluvial fan (T2) at Biskra Palms Oasis in southern California. We provide new estimates of the amount of fault offset of the T2 fan based on trench excavations and new cosmogenic 10 Be age determinations from the tops of 12 boulders on the fan surface. We present three alternative fan offset models: a minimum, a maximum, and a preferred offset of 660 m, 980 m, and 770 m, respectively. We assign an age of between 45 and 54 ka to the T2 fan from the 10 Be data, which is significantly older than previously reported but is consistent with both the degree of soil development associated with this surface, and with ages from U-series geochronology on pedogenic carbonate from T2, described in a companion paper by Fletcher et al. (this volume). These new constraints suggest a range of slip rates between ∼12 and 22 mm/yr with a preferred estimate of ∼14–17 mm/yr for the Mission Creek strand of the southern San Andreas fault. Previous studies suggested that the geologic and geodetic slip-rate estimates at Biskra Palms differed. We find, however, that considerable uncertainty affects both the geologic and geodetic slip-rate estimates, such that if a real discrepancy between these rates exists for the southern San Andreas fault at Biskra Palms, it cannot be demonstrated with available data.

California

Stratigraphic and structural synthesis of a Miocene extensional terrane, southeast California and west-central Arizona

Detailed stratigraphy and isotopic dating of stratigraphic sections in the Colorado River extensional corridor support a regional correlation of highly faulted Tertiary stratigraphic sequences and provide a chronologic framework for interpreting the evolution of low-angle normal (detachment) faults. On the basis of this correlation, we define six tilting domains in the upper plate of the Whipple, Chemehuevi, and Rawhide detachment faults and identify three discrete episodes of detachment faulting that began in the early Miocene and ended in middle Miocene time. Episodes of rapid detachment faulting are indicated by extreme tilting of upper-plate fault blocks and overlying Miocene sequences, fanning dips of basinal deposits, and angular unconformities that represent short time gaps in the accumulation of syntectonic sequences. During the first episode of detachment faulting at about 20 Ma, the upper plate segmented to form the domains. Basin subsidence and extreme tilting of upper-plate fault blocks and syntectonic deposits characterized the eastern Topock, Crossman, Aubrey, Parker Dam, and Buckskin-Rawhide domains, whereas the western Mopah domain was the site of abundant volcanic activity but no basins or tilting. A second episode of extension at about 18 Ma produced extreme tilts in the Buckskin-Rawhide domain but upper-plate blocks in the Mopah domain tilted moderately. A third regionwide faulting episode between 14 and 12 Ma was due to localized uplift of middle and lower crust and eventual exposure of the detachment faults and their footwalls. The upper-plate fault blocks responded passively to localized slip on the detachment faults. Rapid extension began on the Whipple-Chemehuevi detachment fault at 20 Ma and had shifted southward to the Buckskin-Rawhide detachment fault by 18 Ma; volcanic activity also shifted southward to the Buckskin-Rawhide domain at this time. The southward shift of rapid extension and volcanism probably represents buildup and release of strain at localized sites in the lower plate. Otherwise, stratigraphic and structural relations indicate that the locations of upper-plate basins, faulting and tilting of upper-plate blocks, and position of the breakaway zone remained stable throughout the major phases of extension.

Arizona, California

Basin and range structure: A system of horsts and grabens produced by deep-seated extension

Basin and Range structure can be interpreted as a system of horsts and grabens produced by the fragmentation of a crustal slab above a plastically extending substratum. According to this view, the extension of the substratum causes the basal part of the slab to be pulled apart along narrow, systematically spaced zones which in turn cause the downdropping of complex horizontal prisms (grabens) in the brittle upper crust. The grabens form valleys at the surface; the intervening areas are horsts, or tilted horsts. Not all geologists have agreed, however, that Basin and Range structure consists of a system of horsts and grabens. Instead, the structure is commonly considered to consist of tilted blocks in which the upslope part of an individual block forms a mountain and the downslope part a valley. Recent detailed studies, including geophysical work, suggest that the horst and graben model may be more generally applicable. Many of the valleys in the Great Basin are bounded on both sides by faults that drop the valley block down; these faults are exposed at the surface or can be inferred from steep gravity gradients indicative of steep faulted subsurface bedrock slopes. Some areas that were thought to represent a typical series of tilted blocks may be a series of highly asymmetrical grabens in which one side of a valley is marked by a master fault and the other side by valleyward tilt. With present knowledge, most, or perhaps all, of the major valleys in the Great Basin can plausibly be considered to be grabens, and most or all of the mountains can be considered to be horsts or tilted horsts. The grabens, and the underlying inferred deep zones of extension that cause them, are systematically distributed in the Great Basin. They are generally north-trending features spaced 15 to 20 mi apart. Locally, the pattern is more complex, and individual grabens divide and trend away from each other at acute or high angles. In a few places, the pattern may even be roughly polygonal. The distribution pattern of the grabens and the related deep zones of extension resemble crack patterns in small-scale tensional systems, and both patterns may be mechanically related. By analogy with the small-scale systems, the areas of generally north-trending and parallel grabens require east-west extension, whereas the areas with a possible polygonal pattern of grabens must extend radially. The geometry of block faulting related to Basin and Range structure requires sizable east-west extension, estimated at about 1.5 mi on the average for each major valley and at about 30 to 60 mi across the entire Great Basin. Most of this extension has taken place in the last 17 m.y., or perhaps even in the last 7 to 11 m.y., indicating a rate of extension in the range of 0.3 to 1.5 cm/yr.

Arizona, California, Idaho, Nevada, Oregon, Utah