Estimating river discharge with swath altimetry: A proof of concept using AirSWOT observations

Stephen Tuozzolo; Greg D. Lind; Brandon Overstreet; Joseph F. Mangano; Mark A Fonstad; M. Hagemann; R.P.M. Frasson; K Larnier; P.-A. Garambois; J. Monnier; M. Durand

doi:10.1029/2018gl080771

USGS · 70215779

Estimating river discharge with swath altimetry: A proof of concept using AirSWOT observations

Stephen Tuozzolo·Greg D. Lind·Brandon Overstreet·Joseph F. Mangano·Mark A Fonstad·M. Hagemann·R.P.M. Frasson·K Larnier·P.-A. Garambois·J. Monnier·M. Durand

View original source ↗Export metadata ↓

Abstract

The forthcoming Surface Water and Ocean Topography (SWOT) satellite mission will provide global measurements of the free surface of large rivers, providing new opportunities for remote sensing‐derived estimates of river discharge in gaged and ungaged basins. SWOT discharge algorithms have been developed and benchmarked using synthetic data but remain untested on real‐world swath altimetry observations. We present the first discharge estimates from AirSWOT, a SWOT‐like airborne Ka‐band radar, using 6 days of measurements over a 40‐km segment of the Willamette River in Oregon, USA. The three evaluated discharge algorithms estimated discharge with normalized root‐mean‐square errors of 10–31% when compared with in situ gage data but were sensitive to an initial estimate of mean annual discharge. Our results show that these discharge algorithms provide reliable discharge estimates on remotely sensed data at SWOT‐like spatial scales while highlighting the need for further algorithm sensitivity tests.

Explore related subjects

Geophysical Research Letters Article

Source-reported bounding extent: 43.64800079902171° to 44.07574700247845° latitude; -123.02490234375° to -122.40966796874999° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Stephen Tuozzolo, Greg D. Lind, Brandon Overstreet, Joseph F. Mangano, Mark A Fonstad, M. Hagemann, R.P.M. Frasson, K Larnier, P.-A. Garambois, J. Monnier, M. Durand. 2019-02-11. Estimating river discharge with swath altimetry: A proof of concept using AirSWOT observations. https://doi.org/10.1029/2018gl080771

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

Evolution of summit magma pressure during the 2018 caldera collapse at Kılauea volcano

We utilized geodetic data from the 16 May to 4 August 2018 caldera collapse sequence to refine the geometries and pressure evolution of two summit reservoirs at Kīlauea volcano: the shallower Halema‘uma‘u (HMM) and deeper South Caldera (SC) reservoirs. We modeled magma reservoirs as pressurized spheroidal cavities and constrained reservoir geometries with Global Positioning System (GPS) and Interferometric Synthetic Aperture Radar displacements. Inverting high-rate GPS and borehole tilt time series recovered time-dependent reservoir pressure changes and caldera ring fault shear stress. During the collapse sequence, the HMM reservoir accommodated episodic, co-collapse pressure increases of 1.9 MPa (median) and a net 5.8 MPa (median) decrease. Simultaneously, the SC reservoir underwent monotonic depressurization of 6.7 MPa (median). Negligible co-collapse pressure changes in the SC reservoir imply it was not exclusively supplying magma to the eruption vent. These results provide a coherent view of magma reservoir pressure evolution during the 2018 eruption.

Hawaii↗

USGS2026

EMIT reveals elevated calcite signatures in shorelines of Lake Powell and Lake Mead exposed by drought and Colorado River management

Nearly half of Earth’s seasonal freshwater storage variability occurs in human-managed reservoirs, resulting in large areas of reservoir-bed that are episodically inundated or subaerially exposed. Here we use hyperspectral data from NASA’s Earth Surface Mineral Dust Source Investigation (EMIT) mission to map calcite mineral assemblages across exposed surfaces in two large U.S. reservoirs, Lake Mead and Lake Powell. Results show distinct patterns in the occurrence of carbonate, clay, and mica minerals. Reservoir-deposited sediments exhibited significantly higher calcite proportions than adjacent, lithologically similar, non-inundated terrestrial surfaces. These differences likely reflect hydrologically-driven calcite precipitation, wherein warm, clear, productive reservoir waters drive calcium carbonate out of solution. We also detect reductions in calcite proportions in areas of the shoreline disturbed by human recreation. EMIT's imaging capabilities enable rapid, high-resolution mineralogical inventories across vast areas where field sampling is infeasible. We find EMIT is a scalable tool for monitoring geochemical changes associated with large water level fluctuations.

Arizona, Nevada, Utah↗

USGS2026

First application of a coastal-dune model (AeoLiS) to simulate fluvial-aeolian morphodynamics

Quantifying aeolian processes is important to decision-making in river management and for optimizing strategies for ecosystem conservation, natural resource management, and recreation. We applied the AeoLiS aeolian transport model, originally developed for coastal environments, to a dryland river corridor to evaluate its ability to simulate sediment dynamics in a fluvial-aeolian system. The model reproduced spatial and temporal patterns of geomorphic change at a Grand Canyon sandbar, including aeolian dune formation, observed in field data. The model effectively captured trends in observed sediment movement in the spring and summer months. Thus, despite assuming a single grain-size, static vegetation, and not directly accounting for variable sediment supply from fluvial sources, the model performs well at capturing aeolian processes in a complex fluvial-aeolian system. AeoLiS demonstrates strong potential for dryland river applications and management, due to its flexibility and compatibility with coupled modeling frameworks.

Arizona↗