Geology Reports⌕ Search
Home/Archive/USGS

USGS · 70215749

Geophysical constraints on Rio Grande rift structure in the central San Luis Basin, Colorado and New Mexico

Benjamin J. Drenth·V. J. Grauch·Brian D. Rodriguez
View original source ↗Export metadata ↓

Abstract

Interpretation of gravity, aeromagnetic, and magnetotelluric (MT) data reveals patterns of rifting, rift-sediment thicknesses, distribution of pre-rift volcanic and sedimentary rocks, and distribution of syn-rift volcanic rocks in the central San Luis Basin, one of the northernmost major basins that make up the Rio Grande rift. Rift-sediment thicknesses for the central San Luis Basin determined from a three-dimensional gravity inversion indicate that syn-rift Santa Fe Group sediments have a maximum thickness of ~2 km in the Sanchez graben near the eastern margin of the basin along the central Sangre de Cristo fault zone, and reach nearly 1 km within the Monte Vista graben near the western basin margin along the San Juan Mountains. In between, Santa Fe Group thickness is negligible under the San Luis Hills and estimated to reach ~1.1 km under the Costilla Plains (although no independent thickness constraints exist, and a range of thicknesses of 600 m to 2 km is geophysically reasonable). From combined geophysical and geologic considerations, pre-rift, dominantly sedimentary rocks appear to increase in thickness from none in the Sanchez graben on the east to perhaps 800 m under the San Luis Hills on the west. The pre-rift rocks are most likely early Tertiary in age, but the presence of Mesozoic and Paleozoic sedimentary rocks cannot be ruled out. Geophysical data provide new evidence that an isolated exposure of Proterozoic rocks on San Pedro Mesa is rooted in the Precambrian basement. This narrow, north-south–trending basement high has ~2 km of positive relief with respect to the base of the Sanchez graben, and separates the graben from the structural depression beneath the Costilla Plains. A structural high composed of pre-rift rocks, long inferred to extend from under the San Luis Hills to the Taos Plateau, is confirmed and found to be denser than previously believed, with little or no overlying Santa Fe Group sediments. Major faults in the study area are delineated by geophysical data and models; these faults include significant vertical offsets (≥1 km) of Precambrian rocks along the central and southern zones of the Sangre de Cristo fault system. Other faults with similarly large offsets of the Santa Fe Group include a fault bounding the western margin of San Pedro Mesa, and other faults that bound the Monte Vista graben in an area previously assumed to be a simple hinge zone at the western edge of the San Luis Basin. A major north-south–trending structure with expression in gravity and MT data occurs at the boundary between the Costilla Plains and the San Luis Hills structural high. Although it has been interpreted as a down-to-the-east normal fault or fault zone, our modeling suggests that it also is likely related to pre-rift tectonics. Aeromagnetic anomalies over much of the area are interpreted to mainly reflect variations of remanent magnetic polarity and burial depth of the 5.3–3.7 Ma Servilleta Basalt of the Taos Plateau volcanic field. Magnetic-source depth estimates are interpreted to indicate patterns of subsidence following eruption of the basalt, with maximum subsidence in the Sanchez graben.

Explore related subjects

GSA Special PapersArticle
90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 34.34343606848294° to 40.094882122321145° latitude; -107.97363281249999° to -104.23828125° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Benjamin J. Drenth, V. J. Grauch, Brian D. Rodriguez. 2013. Geophysical constraints on Rio Grande rift structure in the central San Luis Basin, Colorado and New Mexico. https://doi.org/10.1130/2013.2494(04)

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2022

Magmatism, migrating topography, and the transition from Sevier shortening to Basin and Range extension, western United States

The paleogeographic evolution of the western U.S. Great Basin from the Late Cretaceous to the Cenozoic is critical to understanding how the North American Cordillera at this latitude transitioned from Mesozoic shortening to Cenozoic extension. According to a widely applied model, Cenozoic extension was driven by collapse of elevated crust supported by crustal thicknesses that were potentially double the present ~30–35 km. This model is difficult to reconcile with more recent estimates of moderate regional extension (≤50%) and the discovery that most high-angle, Basin and Range faults slipped rapidly ca. 17 Ma, tens of millions of years after crustal thickening occurred. Here, we integrated new and existing geochronology and geologic mapping in the Elko area of northeast Nevada, one of the few places in the Great Basin with substantial exposures of Paleogene strata. We improved the age control for strata that have been targeted for studies of regional paleoelevation and paleoclimate across this critical time span. In addition, a regional compilation of the ages of material within a network of middle Cenozoic paleodrainages that developed across the Great Basin shows that the age of basal paleovalley fill decreases southward roughly synchronous with voluminous ignimbrite flareup volcanism that swept south across the region ca. 45–20 Ma. Integrating these data sets with the regional record of faulting, sedimentation, erosion, and magmatism, we suggest that volcanism was accompanied by an elevation increase that disrupted drainage systems and shifted the continental divide east into central Nevada from its Late Cretaceous location along the Sierra Nevada arc. The north-south Eocene–Oligocene drainage divide defined by mapping of paleovalleys may thus have evolved as a dynamic feature that propagated southward with magmatism. Despite some local faulting, the northern Great Basin became a vast, elevated volcanic tableland that persisted until dissection by Basin and Range faulting that began ca. 21–17 Ma. Based on this more detailed geologic framework, it is unlikely that Basin and Range extension was driven by Cretaceous crustal overthickening; rather, preexisting crustal structure was just one of several factors that that led to Basin and Range faulting after ca. 17 Ma—in addition to thermal weakening of the crust associated with Cenozoic magmatism, thermally supported elevation, and changing boundary conditions. Because these causal factors evolved long after crustal thickening ended, during final removal and fragmentation of the shallowly subducting Farallon slab, they are compatible with normal-thickness (~45–50 km) crust beneath the Great Basin prior to extension and do not require development of a strongly elevated, Altiplano-like region during Mesozoic shortening.

Nevada↗
USGS2022

Downhill from Austin and Ely to Las Vegas: U-Pb detrital zircon suites from the Eocene–Oligocene Titus Canyon Formation and associated strata, Death Valley, California

In a reconnaissance investigation aimed at interrogating the changing topography and paleogeography of the western United States prior to Basin and Range faulting, a preliminary study made use of U-Pb ages of detrital zircon suites from 16 samples from the Eocene–Oligocene Titus Canyon Formation, its overlying units, and correlatives near Death Valley. The Titus Canyon Formation unconformably overlies Neoproterozoic to Devonian strata in the Funeral and Grapevine Mountains of California and Nevada. Samples were collected from (1) the type area in Titus Canyon, (2) the headwaters of Monarch Canyon, and (3) unnamed Cenozoic strata exposed in a klippe of the Boundary Canyon fault in the central Funeral Mountains. Red beds and conglomerates at the base of the Titus Canyon Formation at locations 1 and 2, which contain previously reported 38–37 Ma fossils, yielded mostly Sierran batholith–age detrital zircons (defined by Triassic, Jurassic, and Cretaceous peaks). Overlying channelized fluvial sandstones, conglomerates, and minor lacustrine shale, marl, and limestone record an abrupt change in source region around 38–36 Ma or slightly later, from more local, Sierran arc–derived sediment to extraregional sources to the north. Clasts of red radiolarian-bearing chert, dark radiolarian chert, and quartzite indicate sources in the region of the Golconda and Roberts Mountains allochthons of northern Nevada. Sandstones intercalated with conglomerate contain increasing proportions of Cenozoic zircon sourced from south-migrating, caldera-forming eruptions at the latitude of Austin and Ely in Nevada with maximum depositional ages (MDAs) ranging from 36 to 24 Ma at the top of the Titus Canyon Formation. Carbonate clasts and ash-rich horizons become more prevalent in the overlying conglomeratic Panuga Formation (which contains a previously dated 15.7 Ma ash-flow tuff). The base of the higher, ash-dominated Wahguyhe Formation yielded a MDA of 14.4 Ma. The central Funeral Mountains section exposes a different sequence of units that, based on new data, are correlative to the Titus Canyon, Panuga, and Wahguyhe Formations at locations 1 and 2. An ash-flow tuff above its (unexposed) base provided a MDA of 34 Ma, and the youngest sample yielded a MDA of 12.7 Ma. The striking differences between age-correlative sections, together with map-based evidence for channelization, indicate that the Titus Canyon Formation and overlying units likely represent fluvial channel, floodplain, and lacustrine deposits as sediments mostly bypassed the region, moving south toward the Paleogene shoreline in the Mojave Desert. The profound changes in source regions and sedimentary facies documented in the Titus Canyon Formation took place during ignimbrite flareup magmatism and a proposed eastward shift of the continental divide from the axis of the Cretaceous arc to a new divide in central Nevada in response to thermal uplift and addition of magma to the crust. This uplift initiated south-flowing fluvial systems that supplied sediments to the Titus Canyon Formation and higher units.

Arizona, California, Nevada, Utah↗
USGS2022

Tephrochronology of the Miocene Monterey and Modelo Formations, California

Tuff beds have been known in the Miocene Monterey and Modelo Formations since the initial descriptions; however, age control and correlation is predominantly biostratigraphy. Here we combine tephrochronology and biostratigraphy in order to provide numerical age control for eight sedimentary sequences of the Monterey and Modelo Formations from Monterey, California to Orange County, California. We correlate 38 tuffs and tephra beds in the Monterey and Modelo Formations to 26 different dated tuffs found mainly in non-marine sequences in Nevada, Idaho and New Mexico. We also include geochemical data for an additional 19 tuffs in the Monterey and Modelo Formations for which there are no known correlative tuffs and geochemical data for 11 additional tuffs in other units that will add to the Miocene tephrostratigraphy. The identified tuffs range in age from 16 to 7 Ma with 31 tuffs erupted from volcanic centers of the Snake River Plain of northern Nevada to eastern Idaho. Twelve other tuffs erupted from the Southern Nevada Volcanic Field, one from the Sonoma Volcanic Field, north of San Francisco, and the eruptive source of 12 other tuffs is uncertain. These tuffs provide useful correlations of marine sequences deposited at varying depths along offshore Miocene California and possible insight into the distribution of air-fall tephra from so-called super eruptions

GSA Special Papers↗