Geology Reports⌕ Search
Home/Archive/USGS

USGS · 70211254

Wave-resolving Shoreline Boundary Conditions for Wave-Averaged Coastal Models

Francesco Memmola·Alessandro Coluccelli·Aniello Russo·John C. Warner·Maurizio Brocchini
View original source ↗Export metadata ↓

Abstract

Downscaling broadscale ocean model information to resolve the fine-scale swash-zone dynamics has a number of applications, such as improved resolution of coastal flood hazard drivers, modeling of sediment transport and seabed morphological evolution. A new method is presented, which enables wave-averaged models for the nearshore circulation to include short-wave induced swash zone dynamics that evolve at the wave group scale (i.e. averaged over the short waves). Such dynamics, which cannot be described, by construction through wave-averaged models, play a fundamental role in nearshore hydrodynamics and morphodynamics. The method is based on the implementation of a set of Shoreline Boundary Conditions (SBCs) in wave-averaged models. The chosen set of SBCs allows for proper computation of the short-wave properties at a mean shoreline () taken as the envelope of the actual shoreline. The suitability of the approach is assessed through implementation of the SBCs into the Regional Ocean Modeling System (ROMS) coupled to a spectral wave model (InWave for IG waves and SWAN for wind waves). As the aim is to assess the viability of the approach, the SBCs are implemented only through a one-way coupling to ROMS (i.e. ROMS forcing the SBCs). Four different test cases – with constant, periodic and bichromatic offshore forcing – are run to assess the model performances. The main results of the analysis are: (a) the proposed SBCs can well reproduce the shoreline motion and swash zone dynamics in there for all chosen tests (RMSE and BIAS less than 20 % up to a cross-shore resolution of 4.0 m ( or )) and (b) implementation of the SBCs allows ROMS to accurately simulate the swash zone flows even at a resolution 40 times coarser than that needed by ROMS with its own wet–dry routine to properly describe the same flows. The latter result clearly demonstrates the major computational advantage of using the proposed SBCs. We also show that most of the swash zone dynamics is due to the mean flow (i.e. incoming Riemann variable) and the local (at ) wave height. However, especially in the case of bichromatic waves, the swash zone water volume content also seems to play a crucial role.

Explore related subjects

Ocean ModelingArticle

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Francesco Memmola, Alessandro Coluccelli, Aniello Russo, John C. Warner, Maurizio Brocchini. 2020. Wave-resolving Shoreline Boundary Conditions for Wave-Averaged Coastal Models. https://doi.org/10.1016/j.ocemod.2020.101661

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2023

HyWaves: Hybrid downscaling of multimodal wave spectra to nearshore areas

Long-term and accurate wave hindcast databases are often required in different coastal engineering projects. The assessment of the nearshore wave climate is often accomplished by using downscaling techniques to translate offshore waves to coastal areas. However, dynamical downscaling approaches may incur huge computational cost. Additionally, the common use of bulk parameterizations are often not accurate for multidimensional waves. To overcome these limitations, we present a hybrid downscaling approach that combines mathematical algorithms (statistical downscaling) and numerical modeling (dynamical downscaling) over the individual spectral partitions. Every wave partition is downscaled and aggregated afterward by using principles of wave linear theory. By assuming linearity in the propagation of the wave celerity, the application of the method is limited from offshore to intermediate water depths. In addition, the method proposed uses a technique to simplify the spectral boundary conditions in complex domains. The methodology has been applied and validated in the island states of Samoa, American Samoa, Majuro, and Kwajalein, showing good skill at reproducing the spectral hourly time series of significant wave height, peak period, and peak direction. Moreover, an accurate representation of the observed energy spectrum was achieved. This study provides insight into the numerical approximation of the combined sea-swell states while improving the quality of fast spectral forecasting and early warning systems.

Ocean Modeling↗
USGS2023

Efficient modeling of wave generation and propagation in a semi-enclosed estuary

Accurate, and high-resolution wave statistics are critical for regional hazard mapping and planning. However, long-term simulations at high spatial resolution are often computationally prohibitive. Here, multiple rapid frameworks including fetch-limited, look-up-table (LUT), and linear propagation are combined and tested in a large estuary exposed to both remotely (swell) and locally generated waves. Predictions are compared with observations and a traditional SWAN implementation coupled to a regional hydrodynamic model. Fetch-limited and LUT approaches both perform well where local winds dominate with errors about 10%–20% larger than traditional SWAN predictions. Combinations of these rapid approaches with linear propagation methods where remotely generated energy is present also perform well with errors 0%–20% larger than traditional SWAN predictions. Model–model comparisons exhibit lower variance than comparisons to observations suggesting that, while model implementation impacts prediction skill, model boundary conditions (winds, offshore waves) may be a dominant source of error. Overall results suggest that with a relatively small loss in prediction accuracy, simulations computation cost can be significantly reduced (by 2–4 orders of magnitude) allowing for high resolution and long-term predictions to adequately define regional wave statistics.

British Columbia, Washington↗
USGS2019

Relevance of wind stress and wave-dependent ocean surface roughness on the generation of winter meteotsunamis in Northern Gulf of Mexico

Meteotsunamis associated with passing squall lines are often observed ahead of cold fronts during winter seasons in Northern Gulf of Mexico. These types of meteotsunamis occur simultaneously with wind speed variations (~5-20 m/s) and sea-level atmospheric pressure oscillations (~1-6 hPa) with periods between 2 hours to several minutes. In order to enhance understanding of meteotsunami generation and propagation mechanisms, a Coupled-Ocean-Atmosphere-Wave-Sediment Transport (COAWST) modeling system is applied to one of the most intense winter meteotsunamis measured in Northern Gulf of Mexico in the last decade (2009-2018). The model verification with sea level and atmospheric observations show that the fully-coupled model is able to reproduce the timing and intensity of the 10-m wind and sea level atmospheric pressure fluctuations. The mean bias between observed and measured wind speeds and atmospheric pressure are 1.73 m/s and 0.63 hPa respectively. The maximum meteotsunami elevation and its timing are successfully captured by modeled (with a 7% underestimation of the maximum elevation). The relative effect of atmospheric pressure and wind stress divergence on meteotsunami generation is assessed with different numerical simulations. Results indicate that both wind stress and atmospheric pressure oscillations contributed to the generation of the meteotsunami. Wind stress was the dominant force in shallow waters (<15 m in this application), while the effects of atmospheric pressure disturbances dominated over areas with Froude number close to one (~40 m in this application). During the passage of the squall line, the sea surface became rougher in a sea state characterized by young and steep local ocean waves. Compared to a purely wind-speed-dependent roughness scheme, the application of a wave-dependent roughness parameterization improved in 37% modeled meteotsunami maximum elevation.

Northern Gulf of Mexico↗