Distribution of mineral phases in the Eocene Green River Formation, Piceance Basin, Colorado – Implications for the evolution of Lake Uinta

Justin E. Birdwell; Ronald C. Johnson; Michael E. Brownfield

doi:10.31582/rmag.mg.56.2.73

Home/Archive/USGS

USGS · 70210516

Distribution of mineral phases in the Eocene Green River Formation, Piceance Basin, Colorado – Implications for the evolution of Lake Uinta

Justin E. Birdwell·Ronald C. Johnson·Michael E. Brownfield

View original source ↗Export metadata ↓

Abstract

The mineralogy of the Eocene Green River Formation in the Piceance Basin, Colorado, has been the subject of numerous studies since the 1920s. Most previous work has focused on the resource potential of these lacustrine mudrocks, which in addition to substantial oil shale potential (in-place resources of 353 billion barrels of synthetic crude oil for rocks yielding at least 25 gallons per ton, GPT), includes nahcolite, a currently utilized soda ash resource, and dawsonite, a potential alternative source of aluminum. Another reason to study the mineralogy in this system is that the geographic and stratigraphic distribution of various authigenic minerals may provide insights into the geochemistry and depositional environment of the long-lived Eocene Lake Uinta. In this study, legacy non-quantitative (presence/absence) X-ray diffraction (XRD) data recently published by the U.S. Geological Survey (USGS) for more than nine-thousand samples collected from thirty coreholes in the Green River Formation, Piceance Basin were examined. These data were used to better define the stratigraphic and paleogeographic extent of a set of indicator minerals (illite, analcime, albite, dawsonite, and nahcolite) within the Piceance Basin lacustrine strata. This set of minerals was selected based on observations from previous work and variability in their occurrence and co-occurrence within the Piceance Basin. The USGS database has been used to (1) construct maps showing geographic variations in mineral occurrences for 14 stratigraphically defined rich and lean oil shale zones; (2) assess co-occurrences of indicator minerals; and (3) compare occurrence results with quantitative XRD datasets collected on Piceance Basin oil shales. Occurrences of many authigenic minerals (analcime, dawsonite, and nahcolite) varied in the lacustrine strata near and around the depocenter, but others, like quartz, dolomite, and feldspar (potassium + undifferentiated), were widely and consistently present (>90% of samples) across the basin. Shifts in the distribution of indicator mineral occurrences generally coincide with changes identified in previous lake history descriptions and indicate that the water chemistry of Lake Uinta varied significantly going from near-shore to the depocenter and through time.

Explore related subjects

Mountain Geologist Article

Source-reported bounding extent: 38.54816542304656° to 40.96330795307353° latitude; -109.072265625° to -106.435546875° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Justin E. Birdwell, Ronald C. Johnson, Michael E. Brownfield. 2019-05-01. Distribution of mineral phases in the Eocene Green River Formation, Piceance Basin, Colorado – Implications for the evolution of Lake Uinta. https://doi.org/10.31582/rmag.mg.56.2.73

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2020

Characterization of feed coals and coal combustion byproducts from the Wyodak-Anderson coal zone, Powder River Basin, Wyoming

The U.S. Geological Survey (USGS) determined the physical and chemical properties of more than 260 feed coal and coal combustion byproducts from two coal-fired power plants. These plants utilized a low-sulfur (0.23-0.47 wt. % S) and low ash (4.9-6.3 wt. % ash) subbituminous coal from the Wyodak-Anderson coal zone in the Tongue River Member of the Paleocene Fort Union Formation, Powder River Basin, Wyoming. Fifty-three samples of bituminous coal were collected and analyzed from a Kentucky power plant, which used several sources of bituminous coals from the Appalachian and Illinois Basins. Based on scanning electron microscopy (SEM) and X-ray diffraction (XRD) analyses of feed coal samples collected and analyzed from 1996 through the late 2000s, two mineral suites were identified: (1) a primary or detrital suite consisting of quartz (including beta-form grains), biotite, feldspar, and minor zircon; and (2) a secondary authigenic mineral suite containing alumino-phosphates (crandallite and gorceixite), kaolinite, carbonates (calcite and dolomite), quartz, anatase, barite, and pyrite. The detrital mineral suite is interpreted, in part, to be of volcanic origin, whereas the authigenic mineral suite is interpreted, in part, to be the result of the alteration of the volcanic minerals. The mineral suites have contributed to the higher amounts of barium, calcium, magnesium, phosphorus, sodium, strontium, and titanium in the Powder River Basin feed coals in comparison to eastern US coals. XRD analysis indicates that (1) fly ash is mostly aluminate glass, perovskite, lime, gehlenite, quartz, and phosphates with minor amounts of periclase, anhydrite, hematite, and spinel group minerals; and (2) bottom ash is predominantly quartz, plagioclase (albite and anorthite), pyroxene (augite and fassaite), rhodonite, and akermanite, and spinel group minerals. Microprobe and SEM analyses of fly ash samples revealed quartz, zircon, and monazite, euhedral laths of corundum with merrillite, hematite, dendritic spinels/ferrites, wollastonite, and periclase. The abundant calcium and magnesium mineral phases in the fly ash are attributed to the alteration of carbonate, clay, and phosphate minerals in the feed coal during combustion. The calcium- and magnesium-rich and alumino-phosphate mineral phases in the coal combustion byproducts can be attributed to volcanic minerals deposited in peat-forming mires. Dissolution and alteration of these detrital volcanic minerals occurred either in the peat-forming stage or during coalification and diagenesis, resulting in the authigenic mineral suite. The presence of free lime (CaO) in fly ash produced from Wyodak-Anderson coal acts as a self-contained “scrubber” for SO 3 , where CaO + SO 3 form anhydrite either during combustion or in the upper parts of the boiler. Considering the high lime content in the fly ash and the resulting hydration reactions after its contact with water, there is little evidence that major amounts of leachable metals are mobilized in the disposal or utilization of this fly ash.

Wyoming↗

USGS2020

Mineralogy and lithology of the Upper Cretaceous Niobrara Formation determined by hyperspectral core imaging

Sections of the Upper Cretaceous (Coniacian to Campanian) Niobrara Formation in two cores from Kansas and Colorado, the Amoco Rebecca Bounds and USGS Portland 1, respectively, were examined by hyperspectral core imaging and analysis. A spectral imaging system combining high-resolution photography (50 μm), 3D laser profiling (20 μm), and near-visible + short-wave infrared reflectance spectroscopy (wavelengths from 450 to 2500 nm, 500 μm pixel size) was applied to these cores to provide spectral and textural data facilitating creation of continuous mineral and lithology class maps. In addition, compositing of pixel-based results to group pixels to create mineralogical and lithological logs (0.5 ft resolution) was performed to facilitate comparisons to other geochemical datasets. The results show general correspondence in trends identified by previous geochemistry studies, with some exceptions due to instrumental limitations related to low reflectance of some rock intervals and the limited range of infrared wavelengths examined. This study provides a cursory overview of an extensive dataset meant to demonstrate the utility of hyperspectral core scanning to studies of mudrocks in petroleum systems as well as the kinds of information this technique can provide for detailed examination of stratigraphic features in sedimentary systems more generally.

Mountain Geologist↗

USGS2019

Controls on petroleum resources for the Devonian Marcellus Shale in the Appalachian Basin Province, Kentucky, West Virginia, Ohio, Pennsylvania, and New York

Greater than 33 trillion cubic feet of gas, 68 million barrels of natural gas liquids (NGL), and 192 million barrels of water have been produced from the Middle Devonian Marcellus Shale of the Hamilton Group in the Appalachian Basin. These volumes are from more than 11,700 non-commingled wells. Areas of greatest production and future potential for gas and NGL from the Marcellus Shale are within and near the northeast-trending Rome trough in northern West Virginia and Pennsylvania. Southernmost New York, eastern Ohio, western Virginia, and Maryland also contain petroleum potential and (or) reserves. A confluence of factors enhances gas and NGL reserves and resources in the Marcellus Shale. These include (1) brittleness based on lithofacies composition; (2) thickness and distribution of brittle and organic-rich shale; (3) measured thermal maturity of 1% vitrinite reflectance and greater; (4) at least 2 weight percent total organic carbon; (5) dense and complex fracturing and faulting; (6) presence of evaporite beds in the underlying Silurian Salina Group; (7) potential overpressure; (8) current depths of 1,370 m (4,500 ft) and greater; and (9) predominately horizontal wells with laterals that are oriented to the northwest or southeast, or roughly perpendicular to the direction of maximum horizontal stress, and that cross major fault and fracture sets.

Kentucky, West Virginia, Ohio, Pennsylvania, New Y↗