Geology Reports⌕ Search
Home/Archive/USGS

USGS · 70208048

I.-Subaerial Deposits of the Arid Region of North America

Israel C. Russell
View original source ↗Export metadata ↓

Abstract

The subaërial deposits now accumulating in the arid portion of the United States may be divided into four classes: 1, Eolian Sands; 2, Talus Slopes; 3, Alluvial Cones; and 4, Calcareous Clays to which no specific name has been applied, but which, for reasons stated below, will be called “adobe” in this paper.

Explore related subjects

Geological MagazineArticle

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Israel C. Russell. 2009-05-01. I.-Subaerial Deposits of the Arid Region of North America. https://doi.org/10.1017/s0016756800176411

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2009

Fission-track ages from the Precambrian of Shropshire

Four samples of Longmyndian and Uriconian strata from S of Shrewsbury, England have been processed for apatite and/or zircon fission-track ages. The resultant ages illustrate how depth of burial may affect fission-track ages. The analytical procedures followed were as described in Naeser (1979).-from Authors

Geological Magazine↗
USGS2009

Structure and eruptive mechanisms at Surtsey Volcano, Iceland

Glassy basalt tuff was the primary material cored in 1979 from a 181 m deep drill hole on the east tuff ring of Surtsey volcano. Despite the fact that the hole extends 122 m below sea level all the core is similar to the exposed tephra composing the two tuff rings of the island. The tuff includes abundant accretionary lapilli and tuff vesicles, indicating that it was all deposited subaerially. During the growth of the tuff rings, repeated hydromagmatic explosion cycles began with a series of intermittent tephra-finger explosions leading up to continuous uprush explosions which lasted for several minutes to several hours. This nozzle-like continuous activity produced eruption columns 100–250 m in diameter and 500–2000 m in height which probably quarried several hundred metres below the ground surface. The continuous-uprush explosion type provides a reasonable mechanism to excavate a diatreme from the top down. During construction of the tuff rings, concentric faults repeatedly downdropped a funnel-like structure (400–800 m in diameter) several hundred metres, thus accounting for the presence of subaerially deposited tephra in the drill core far beneath sea level. Ring dykes later intruded upward along these faults and fed small lava flows. Heat in the surface tephra probably originated primarily from these shallow intrusions.

Geological Magazine↗