Geology ReportsSearch

USGS · 70207116

Using stream-side groundwater discharge for geochemical exploration in mountainous terrain

Abstract

Groundwater chemistry has been predominantly used in geochemical exploration studies to identify mineralized targets concealed under transported cover in areas with gentle topography. Another potentially valuable ap-plication that has received little attention is using groundwater chemistry to identify deposits concealed within mountain ridges. A number of geochemical exploration studies have employed surface water chemistry in hilly and mountainous terrain and have demonstrated mixed success. However, groundwater chemistry is potentially a more refined and powerful tool because groundwater sample locations can be selected to target a specific hillslope zone, whereas surface water integrates the geochemical signature of the entire watershed area above the sample site. In this study, we propose an approach that utilizes shallow groundwater samples collected from near-stream, hand-installed sampling points. We tested this approach in Handcart Gulch, an unmined catchment in the Montezuma Mining District, Colorado, USA, where previous studies suggested the possible presence of a concealed mineral occurrence. Seventeen near-stream mini-boreholes were drilled in a stream-parallel 3.3-km-long transect to depths of ~2 m in ferricrete (iron-oxide cemented colluvium and alluvium) using a handheld rock-coring drill. Groundwater in the mini-boreholes was sampled for major and trace element chemistry, as well as environmental tracers including stable water isotopes, dissolved noble gases, helium isotopes, and tritium, to identify possible variations in groundwater age and recharge conditions/sources. Chemistry data delineate a well-defined 900-m-wide zone of elevated SO4, Cu, and other metal concentrations on the east side of the stream. In this zone, Cu concentrations up to 2670 μg/L are 1–3 orders of magnitude greater than concentrations in upstream and downstream areas. Environmental tracer data show no corresponding anomalies in groundwater age or recharge conditions/sources within the zone, suggesting that the source of the elevated metals is a change in bedrock mineralogy as opposed to other hydrologic factors. The groundwater samples therefore successfully identify and refine the location of a potential concealed high-Cu mineral occurrence in the watershed, de-monstrating that near-stream groundwater discharge may be a valuable medium for geochemical exploration in mountainous areas.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 36.992426° to 41.003444° latitude; -109.060253° to -102.041524° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Andrew H. Manning, Jean M. Morrison, Richard B. Wanty, Christopher T. Mills. 2019. Using stream-side groundwater discharge for geochemical exploration in mountainous terrain. https://doi.org/10.1016/j.gexplo.2019.106415

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Top-down targeted network analysis of critical mineral commodities applied to international geochemistry database

The global demand for critical mineral commodities is rapidly increasing, making domestic production an important factor in supporting the economy and national security. Large scale, publicly available geochemical databases allow for the application of data informatics methods to interrogate critical mineral commodities data for correlations in deposit formation and distribution, particularly for identifying enrichment of multiple critical mineral commodities at the same deposit. In this study, we applied network analysis to the Critical Minerals Mapping Initiative (CMMI) ore geochemistry (Critical Minerals in Ores, CMiO) database to identify the high concentration (defined as 10× bulk crustal abundance) co-occurrence of different critical mineral commodities across a mineral system hierarchy from deposit environments to individual deposits. Identifying patterns or unique outliers in enrichment in network communities will allow for the location of secondary critical mineral commodity resources from under-utilized deposits. We find trends in the enrichment of critical mineral commodities in network-communities between the elements praseodymium (Pr), neodymium (Nd), terbium (Tb), and dysprosium (Dy) across multiple CMiO database deposit environments and groups down to specific deposit types and sites. A separate trend in network community deposition is observed as well between iridium (Ir) and platinum (Pt) in deposit environments, groups, types, and sites. Network analysis focused on critical minerals in magmatic-hydrothermal deposits identified multiple deposit sites from different deposit types within the CMiO database with concentrations of Dy, Nd, Tb, Pr, Ir, and Pt that are at least ten times greater than the crustal average. This approach can be applied to any target element(s) or deposit(s) of interest, allowing broad investigation of co-enriched critical mineral commodities.

Journal of Geochemical Exploration

Hyperspectral (VNIR-SWIR) analysis of roll front uranium host rocks and industrial minerals from Karnes and Live Oak Counties, Texas Coastal Plain

VNIR-SWIR (400–2500 nm) reflectance measurements were made on the surfaces of various cores, cuttings and sample splits of sedimentary rocks from the Tertiary Jackson Group, and Catahoula, Oakville and Goliad Formations. These rocks vary in composition and texture from mudstone and claystone to sandstone and are known host rocks for roll front uranium occurrences in Karnes and Live Oak Counties, Texas. Spectral reflectance profiles, 569 in total, were reduced to 125 representative spectral signatures, which were analyzed using the U.S. Geological Survey's (USGS) Material Identification and Characterization Algorithm (MICA). MICA uses an automated continuum-removal procedure together with a least-squares linear regression to determine the fit of observed sample spectral absorption features to those of reference mineral standards in a spectral library. The reference minerals include various clay, mica, carbonate, ferric and ferrous iron minerals and their mixtures. In addition, absorption feature band-depth analysis was done to identify rock surfaces exhibiting absorption features related to uranium and zeolite minerals, which were not included in the command files used to execute MICA. Rocks from each of the four geologic units produced broadly similar spectral signatures as a result of comparable mineral compositions, but there were some notable differences. For example, Ca- and Na-montmorillonite was matched most frequently to the spectral absorption features in 2-μm (∼2000–2500 nm) wavelengths, while goethite occurred often at 1-μm (∼400–1000 nm) wavelengths. The latter is related to limonitic iron-staining in and around oxidized zones of the uranium roll front as described in previous papers. Rocks of the Jackson Group differed from those of the Catahoula, Oakville and Goliad units in that the former exhibited spectral features we interpret as being due to the presence of lignite-bearing mudstone layers. Goliad rocks exhibit spectral features related to dolomite, gypsum, anhydrite, and an unidentified green clay mineral that is possibly glauconite . Jackson Group rocks also exhibit weak but well-resolved absorption features at 964 and 1157 nm related to either or both zeolite minerals clinoptilolite and heulandite. These zeolite minerals and a few spectra exhibiting hydrous silica absorption features are indicative of alteration of volcanic glass in tuffaceous mudstone and claystone layers. A few sample spectra exhibited strong absorption features at around 1135 nm related to the uranium mineral coffinite. Both the 1135 nm coffinite and 1157 nm zeolite absorption features overlap somewhat, potentially making them difficult to distinguish without additional hyperspectral field, laboratory or remote sensing data. The results of this study were compared to mixtures of minerals described for ore, gangue and alteration minerals in deposit models for sandstone-hosted uranium, sedimentary bentonite and sedimentary zeolite. Use of these spectra can help facilitate mapping of both waste materials from the legacy mining of the above commodities, as well as future exploration and resource assessment activities.

Texas

The addition of 144Nd atomic mass to routine ICP-MS analysis as a Quick Screening Tool for Approximating Rare Earth Elements (Q-STAR) in natural waters

Rare earth elements (REEs) are a class of critical minerals, all of which can have supply chain vulnerability that impacts economic security. These elements are widely measured in environmental matrices via inductively coupled plasma mass spectrometry (ICP-MS); however, successful quantification can require time-consuming, sample-specific optimization. While a sample-by-sample approach is appropriate for targeted quantification studies, this approach is not suitable for mineral exploration efforts where rapidly screening thousands of samples for the presence of REEs is desired. Here, we demonstrated the use of a Quick Screening Tool for Approximating REEs (Q-STAR) to detect REEs in surface water and groundwater matrices, collected as part of existing environmental studies. A mass-to-charge ratio of 144 ( m / z = 144) was added to an ICP-MS method to screen for REEs in filtered water samples submitted for metals analyses to the U.S. Geological Survey (USGS) National Water Quality Laboratory. We detected the presence of REEs above a reference threshold of 1200 counts per second in 18 % of pre-selected 6626 samples. Using this screened dataset, we mapped estimated dissolved REE concentrations across the United States in relation to ecoregions and underlying geology. Data are constrained to where sample collection took place but nevertheless show estimated aqueous dissolved REE concentrations on a geographic scale that has not yet been studied. To validate Q-STAR, REEs were measured in a USGS standard reference sample, a subset of 88 archived filtered water samples, and in fresh filtered surface water samples. Our targeted analyses demonstrated a strong linear relationship between Q-STAR predicted and measured values in all archived samples for Nd (r 2 = 0.94), and light REEs (LREEs) such as lanthanum (La) (r 2 = 0.93), praseodymium (Pr) (r 2 = 0.94) and samarium (Sm) (r 2 = 0.94). Using Q-STAR screen values, nine field sites were identified and surface water samples recollected to confirm the continued presence of Nd and LREEs. Q-STAR can be used to screen an unlimited number of water samples for the presence of REEs prior to time-intensive and costly quantitative analyses and to generate large REE datasets for further investigation.

Journal of Geochemical Exploration