Lead and strontium isotope studies of the Boulder Batholith, Southwestern Montana

B. R. Doe; R.I. Tilling; C. E. Hedge; M. R. Klepper

doi:10.2113/gsecongeo.63.8.884

Home/Archive/USGS

USGS · 70206752

Lead and strontium isotope studies of the Boulder Batholith, Southwestern Montana

B. R. Doe·R.I. Tilling·C. E. Hedge·M. R. Klepper

View original source ↗Export metadata ↓

Abstract

The isotopic composition of lead in feldspar varies widely from pluton to pluton of the Late Cretaceous Boulder batholith, encompassing the following ranges in isotopic values: 16.9-18.1 for Pb 206 /Pb 204 ; 15.4-15.7 for Pb 207 /Pb 204 ; and 37.7-38.5 for Pb 205 /Pb 204 . Although each pluton has a characteristic isotopic composition, the fact that Pb 206 /Pb 204 for the Butte Quartz Monzonite varies by 1.3 percent, compared to a range of about 8.6 percent for the batholith as a whole, suggests that perfect isotopic mixing of the magma was not always attained. Whole rock initial Sr 87 /Sr 88 for the entire batholith ranges from 0.705 to 0.710, comparable to ranges for the Sierra Nevada and British Columbia batholiths. Ore leads of the Butte district are isotopically very similar to feldspar leads of the host Butte Quartz Monzonite. This isotopic similarity was interpreted by Murthy and Patterson (1961a) to indicate complete mixing of independently derived feldspar lead and ore lead rather than close genetic relationship. However, detailed study of the only sample in the present investigation, from the Donald pluton, that clearly has mixed leads shows significant differences in lead isotopic composition between megacryst K-feldspar and both the groundmass K-feldspar and plagioclase, indicating that isotopic mixing of leads is not complete, even within a single hand specimen. Spatial relations of isotopic differences among the various plutons strongly suggest that complete mixing of leads of different isotopic composition from the magma did not occur in the Butte Quartz Monzonite nor in any other pluton of the batholith, and that the isotopic similarity between Butte ore and feldspar lead of the host rock indeed stems from a genetic association. Lead and strontium isotope ratios generally behave in a similar way; that is, the more radiogenic the lead in a rock, the more radiogenic the strontium. The source of the lead which could produce the isotope variations observed for the batholith is calculated to have a mean age of about 2,200 m.y., which is compatible with ages of Precambrian crystalline rocks in the region, and an isotopic makeup with U 238 /pb 204 <9, Th/U > 4, and Rb/Sr of 0.03-0.09. However, no large volumes of prebatholith rocks exposed in the Boulder batholith region are of the required isotopic composition, which is typical of basaltic-gabbroic or quartz dioritic chemical composition. Models involving complete melting of possible source materials to account for the isotope variations are considered and rejected. Mechanisms involving par.tial melting of lower crustal or upper mantle source material appear to be the most viable in explaining the observed isotopic compositions. Assimilation of upper crustal material (i.e., the Precambrian Belt and pre-Belt rocks, in which the lead and strontium are more radiogenic than in the batholith rocks) may have accompanied partial melting of the lower crust or upper mantle and indeed must have played a major role if the source material had a composition isotopically comparable to that observed for oceanic tholelites (i.e., low Th/U, U 238 /Pb 204 and Rb/Sr), but would be relatively unimportant if the source material were sufficiently radiogenic to begin with as might be expected from basalt, gabbro, or quartz diorite compositions 2,200 m.y. old. © 1968 Society of Economic Geologists, Inc.

Explore related subjects

Economic Geology Article

Source-reported bounding extent: 46.01603873833416° to 46.60982785835103° latitude; -112.72247314453124° to -112.01934814453125° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

B. R. Doe, R.I. Tilling, C. E. Hedge, M. R. Klepper. 1968-12-01. Lead and strontium isotope studies of the Boulder Batholith, Southwestern Montana. https://doi.org/10.2113/gsecongeo.63.8.884

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

Origin of the Pd/Pt ratio of the J-M Reef, Stillwater Complex, Montana, USA

The J-M reef of the Stillwater Complex is characterized by a high Pd/Pt ratio (mean ~3.8 with a standard error of 0.03) with a homogeneous geospatial distribution at the deposit scale. In this contribution, we demonstrate that the Pd/Pt ratio of the reef is the product of equilibration of an immiscible sulfide liquid with a silicate melt rich in Pd relative to Pt. Despite the high tenors of the J-M reef sulfides (avg 2,700 ppm Pt and 770 ppm Pt), numerical modeling shows that the parental melts did not have extraordinary Pd and Pt concentrations. Instead, the initial composition of a plausible parental silicate melt can have Pd and Pt contents well within the expected range of a normal, mantle-derived partial melt (i.e., ~10–20 ppb for both Pd and Pt with Pd/Pt of ~1). The relative differences in the partitioning behavior of Pt and Pd between sulfide liquid and silicate melt are unlikely to produce a consistent Pd/Pt ratio across a wide range of silicate melt to sulfide liquid mass ratios (i.e., R factors). Instead, the pre-emplacement fractionation of Pt alloy from S-undersaturated silicate magma accounts for the homogeneous and high Pd/Pt ratio of the J-M reef. We show that batch equilibration of sulfide liquid with silicate melt can produce the high Pd/Pt ratios of the reef if the partition coefficients between sulfide liquid and silicate melt for Pd and Pt are extremely high (>10 6 ). In an alternative model, Pd enrichment could be achieved by sulfide upgrading in resident footwall mush even if the partition coefficients between sulfide liquid and silicate melt are relatively small (between 10 4 and 10 6 ) because the instantaneous mass ratio of silicate melt to sulfide liquid is small (R ≈ 100–700), so the partitioning behavior of Pt and Pd has little impact on the composition of sulfide liquid.

Montana↗

USGS2025

Depth of magma crystallization and fluid exsolution beneath the porphyry-skarn Cu deposits at Santa Rita and Hanover-Fierro, New Mexico, USA

The depth level at which porphyry Cu–forming magmas fractionated and exsolved mineralizing fluids is actively debated. In the classic model, extensive magma fractionation occurs in large, upper crustal magma chambers, and concomitant fluid exsolution leads to forceful expulsion of residual magmas in the form of porphyry dikes, stocks, and breccia pipes, which subsequently serve as pathways for the mineralizing fluids. In contrast, some recent studies highlighting the role of deep crustal magma fractionation in the production of fertile magmas essentially deny the existence of upper crustal magma chambers at the time of mineralization. To address this, we conducted a detailed thermobarometric investigation of 13 intermediate to felsic, porphyritic intrusive rocks related to porphyry-skarn Cu mineralization at Santa Rita and Hanover-Fierro, New Mexico, United States, representing two premineralization magmas (61–60 Ma), seven synmineralization magmas (60–58 Ma), and four late- to postmineralization magmas (58–57 Ma). For each sample, the pressure of last magma crystallization before final magma ascent to the current exposure level was reconstructed based on Al-in-hornblende barometry of small hornblende inclusions trapped within quartz phenocrysts and through titanium-in-quartz (TitaniQ) thermobarometry of the host quartz phenocrysts themselves. Since quartz is one of the last crystallizing magmatic minerals, and no significant phenocryst growth could have occurred in small dikes and stocks after final magma emplacement, quartz phenocrysts and their contained hornblende inclusions record the depth of last magma crystallization before final magma ascent. When present, hornblende phenocrysts and hornblende inclusions within other major phenocrysts were also analyzed. Both quartz and hornblende barometers return consistent average pressures of 3.2 ± 0.4 kbar for the entire suite of pre- to postmineralization magmas, corresponding to depths of 11 to 14 km. The synmineralization magmas return even more consistent average pressures of 3.1 ± 0.2 kbar, corresponding to a depth of 12 ± 1 km. The volume of the mineralizing porphyry dikes and stocks at the emplacement level is far too small to have provided all the fluids and metals required to form the observed ore deposits. Therefore, the majority of the ore-forming fluids must have originated from the magmas that crystallized at 12 ± 1 km depth. The ore deposits, conversely, formed at ~5-km paleodepth. This implies that most of the mineralizing fluids traveled an average vertical distance of ~7 km from their magmatic source to the eventual site of ore precipitation. The relatively unaltered nature and low veining degree of deeper parts of mineralized porphyry dikes and stocks suggest that the fluid transport through these intrusive bodies occurred mostly at near-solidus conditions by means of fluid percolation along grain boundaries. In summary, our results suggest that (1) a large, upper crustal pluton exists ~7 km beneath the Santa Rita and Hanover-Fierro deposits; (2) abundant phenocryst crystallization occurred at this depth level; and (3) this pluton was the main source for the exsolution of ore-forming fluids. However, the investigated rocks have elevated whole-rock Sr/Y ratios, indicating magma fractionation at deep crustal levels. As a result, our preferred model is a combination of the two end-member models introduced above, with most magma fractionation having occurred in the deep crust and with residual, intermediate to felsic melts having ascended and accumulated at 11 to 14 km paleodepth, where they continued to crystallize with comparatively little crystal-liquid separation, before some of these magmas ascended further to shallow levels and quenched to porphyries.

New Mexico↗

USGS2025

Assimilation of reduced carbon triggers platinum alloy saturation in mafic and ultramafic magmas

It is generally observed that magmatic sulfide ores have higher ratios of Pd/Pt than the mantle-like values of their parental magmas. This discrepancy has defied simple explanation because the partitioning behavior of both elements between sulfide and silicate liquids is very similar. Assimilation of sulfur- and carbon-rich country rocks by mafic and ultramafic magmas is considered a critical, if not essential, step in the formation of magmatic base metal sulfide deposits. Although there is general consensus that the assimilation of external sulfur and carbon promotes sulfide saturation, the effect of carbon assimilation on the solubilities of platinum-group elements in natural S-bearing silicate melt has been overlooked. In this study, we investigate the variations of platinum and palladium solubilities during assimilation of graphite and methane through thermodynamic modeling, in comparison with data from an array of highly distinctive magmatic sulfide ore systems representing ages from Archean to Paleozoic, melt compositions from komatiite to basalt, and magmatic settings including lavas, hypabyssal intrusions, plutonic continental arc roots, and plutonic layered intrusions, namely: Raglan, Norilsk-Talnakh, Lac des Iles, and the J-M Reef of the Stillwater Complex. We model assimilation-fractional crystallization processes to estimate the reduction of oxygen fugacity ( ⁠fO2⁠ ) of the melt due to incorporation of graphite and methane. The simulations show that although Pd remains highly soluble during the progressive assimilation of reduced carbon, Pt solubility decreases significantly as the silicate melt becomes increasingly reduced. With less than 8 % of sediment assimilation, Pt alloy may saturate and then deviate from sulfide-undersaturated silicate melts, concomitantly increasing the Pd/Pt value of the remaining melts of the Raglan and Norilsk-Talnakh systems. For the Lac des Iles and Stillwater systems, a higher extent of assimilation is needed to reach Pt saturation because of the relatively carbon-poor nature of the lower crustal rocks. The assimilation of methane volatiles is shown to be more effective than graphite assimilation, and it provides a pathway to Pt alloy fractionation in the absence of detectable amounts of bulk host-rock assimilation. High Pd/Pt values have been documented in many world-class magmatic sulfide deposits whose parental magmas have demonstrably experienced crustal contamination. Our model suggests that although anomalous Pd/Pt values may be explained by other mechanisms such as incongruent melting of preexisting sulfide or differences in the diffusivities of the metals within achieving equilibration, the assimilation of graphite or methane may play an important role in the global occurrence of magmatic sulfide ores with elevated Pd/Pt values.

Economic Geology↗