Geology Reports⌕ Search
Home/Archive/USGS

USGS · 70199495

The Ag-Mn-Pb-Zn vein, replacement, and skarn deposits of Uchucchacua, Peru; studies of structure, mineralogy, metal zoning, Sr isotopes, and fluid inclusions

M. Andrew Bussell
View original source ↗Export metadata ↓

Abstract

Uchucchacua is an Ag-Mn-Pb-Zn vein, replacement, and skarn mineral district in the central Andes of Peru. Host rocks are massive Jumasha Formation shelf limestones of Turonian age that have been folded into an asymmetric northeast-verging anticline of Andean trend. Strata near the fold crest are cut by minor dacitic intrusions and have been displaced by a conjugate set of steep wrench faults that strike northwest-southeast and northeast-southwest. Most ore occurrences are restricted to host rocks that lie below marly limestone at the top of the middle Jumasha Formation. Vein ores located along the fracture system have formed by fissure infill and by replacement of limestone wall rocks. Larger sheetlike replacement orebodies are parallel and adjacent to a large fault. Replacement is in zones of brecciation adjacent to fault bends which were dilatent during sinistral slip of the master fracture. Such fracture belts may have been subject to paleokarst solution processes before mineralization.Four paragenetic stages have been identified. Fe, Mn, and Si were introduced at the exoskarn stage (I) as the anhydrous silicates ferroan tephroite, johannsenite, rhodonite, and bustamite. During the early main stage (II) ferroan tephroite was replaced by friedelite and magnetite under oxidizing conditions at a relatively low pH. Pb, Zn, Fe, Cu, and B were introduced; principal sulfides are pyrrhotite, Fe-rich sphalerite, Mn-rich wurtzite, alabandite, galena, chalcopyrite, and tetrahedrite. Pyrrhotite was replaced by other sulfides during later stage II. Main gangue minerals were calcite, kutnohorite, rhodochrosite, and quartz. Ag, As, and Sb were introduced during the late stage (III) in the form of sulfosalts, principally pyrargyrite. Redistribution of metals introduced at stage II resulted in the growth of Fe-poor sphalerite and alabandite accompanied by calcite gangue. Decreasing Fe contents of alabandite and sphalerite during late stage II and stage III, together with the appearance of pyrite, indicate an increase in sulfur fugacity and/or decrease in temperature over this period. The supergene stage (IV) affects the upper 30 to 150 m of most veins and involves the growth of Mn hydroxides, goethite, orpiment, marcasite, cerussite, and siderite.Distribution patterns of metal ratios and high metal values define ore bands, with a succession of antiforms and synforms. Ore-band locations are determined by vein width, itself a function of wall-rock reactivity, and fracture permeability. Metal ratio distributions in the Luz vein show symmetric dispersion of metals at right angles to the ore-band axis. Ag shows the least dispersion with progressively greater dispersion of Pb and Zn.Geologic considerations indicate mineralization at a minimum depth of 1,600 m. Most primary fluid inclusions in calcite of probable stage II origin were trapped over a temperature range of about 200 degrees to 337 degrees C (hydrostatic pressure) or about 225 degrees to 362 degrees C (lithostatic). Fluid inclusions from late stage II quartz were trapped at about 165 degrees to 205 degrees C (hydrostatic) or 190 degrees to 230 degrees C (lithostatic). Salinity ranged from 0.5 to 29.7 equiv wt percent NaCl-CaCl 2 with little relation to temperature. Calcite 87 Sr/ 86 Sr values of 0.70743 to 0.71122 extend well outside the range of values both determined for magmatic rocks of the region and estimated for the host limestones but are probably compatible with older sedimentary rocks of the mine district. Salinity levels and NaCl/CaCl 2 ratios are similar to basinal brines associated with Mississippi Valley-type deposits. It is concluded that basinal brine, expelled from the deforming Mesozoic sequence, was a significant component of the ore fluid. This fluid was probably heated by dacitic magmas or cooling dacitic intrusions; a polygenetic high-salinity magmatic-basinal fluid then rose along existing strike-slip fractures toward the mineralization site where it mixed with heated low-salinity ground water.

Explore related subjects

Economic GeologyArticle

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

M. Andrew Bussell. 1990-11-01. The Ag-Mn-Pb-Zn vein, replacement, and skarn deposits of Uchucchacua, Peru; studies of structure, mineralogy, metal zoning, Sr isotopes, and fluid inclusions. https://doi.org/10.2113/gsecongeo.85.7.1348

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

Origin of the Pd/Pt ratio of the J-M Reef, Stillwater Complex, Montana, USA

The J-M reef of the Stillwater Complex is characterized by a high Pd/Pt ratio (mean ~3.8 with a standard error of 0.03) with a homogeneous geospatial distribution at the deposit scale. In this contribution, we demonstrate that the Pd/Pt ratio of the reef is the product of equilibration of an immiscible sulfide liquid with a silicate melt rich in Pd relative to Pt. Despite the high tenors of the J-M reef sulfides (avg 2,700 ppm Pt and 770 ppm Pt), numerical modeling shows that the parental melts did not have extraordinary Pd and Pt concentrations. Instead, the initial composition of a plausible parental silicate melt can have Pd and Pt contents well within the expected range of a normal, mantle-derived partial melt (i.e., ~10–20 ppb for both Pd and Pt with Pd/Pt of ~1). The relative differences in the partitioning behavior of Pt and Pd between sulfide liquid and silicate melt are unlikely to produce a consistent Pd/Pt ratio across a wide range of silicate melt to sulfide liquid mass ratios (i.e., R factors). Instead, the pre-emplacement fractionation of Pt alloy from S-undersaturated silicate magma accounts for the homogeneous and high Pd/Pt ratio of the J-M reef. We show that batch equilibration of sulfide liquid with silicate melt can produce the high Pd/Pt ratios of the reef if the partition coefficients between sulfide liquid and silicate melt for Pd and Pt are extremely high (>10 6 ). In an alternative model, Pd enrichment could be achieved by sulfide upgrading in resident footwall mush even if the partition coefficients between sulfide liquid and silicate melt are relatively small (between 10 4 and 10 6 ) because the instantaneous mass ratio of silicate melt to sulfide liquid is small (R ≈ 100–700), so the partitioning behavior of Pt and Pd has little impact on the composition of sulfide liquid.

Montana↗
USGS2025

Depth of magma crystallization and fluid exsolution beneath the porphyry-skarn Cu deposits at Santa Rita and Hanover-Fierro, New Mexico, USA

The depth level at which porphyry Cu–forming magmas fractionated and exsolved mineralizing fluids is actively debated. In the classic model, extensive magma fractionation occurs in large, upper crustal magma chambers, and concomitant fluid exsolution leads to forceful expulsion of residual magmas in the form of porphyry dikes, stocks, and breccia pipes, which subsequently serve as pathways for the mineralizing fluids. In contrast, some recent studies highlighting the role of deep crustal magma fractionation in the production of fertile magmas essentially deny the existence of upper crustal magma chambers at the time of mineralization. To address this, we conducted a detailed thermobarometric investigation of 13 intermediate to felsic, porphyritic intrusive rocks related to porphyry-skarn Cu mineralization at Santa Rita and Hanover-Fierro, New Mexico, United States, representing two premineralization magmas (61–60 Ma), seven synmineralization magmas (60–58 Ma), and four late- to postmineralization magmas (58–57 Ma). For each sample, the pressure of last magma crystallization before final magma ascent to the current exposure level was reconstructed based on Al-in-hornblende barometry of small hornblende inclusions trapped within quartz phenocrysts and through titanium-in-quartz (TitaniQ) thermobarometry of the host quartz phenocrysts themselves. Since quartz is one of the last crystallizing magmatic minerals, and no significant phenocryst growth could have occurred in small dikes and stocks after final magma emplacement, quartz phenocrysts and their contained hornblende inclusions record the depth of last magma crystallization before final magma ascent. When present, hornblende phenocrysts and hornblende inclusions within other major phenocrysts were also analyzed. Both quartz and hornblende barometers return consistent average pressures of 3.2 ± 0.4 kbar for the entire suite of pre- to postmineralization magmas, corresponding to depths of 11 to 14 km. The synmineralization magmas return even more consistent average pressures of 3.1 ± 0.2 kbar, corresponding to a depth of 12 ± 1 km. The volume of the mineralizing porphyry dikes and stocks at the emplacement level is far too small to have provided all the fluids and metals required to form the observed ore deposits. Therefore, the majority of the ore-forming fluids must have originated from the magmas that crystallized at 12 ± 1 km depth. The ore deposits, conversely, formed at ~5-km paleodepth. This implies that most of the mineralizing fluids traveled an average vertical distance of ~7 km from their magmatic source to the eventual site of ore precipitation. The relatively unaltered nature and low veining degree of deeper parts of mineralized porphyry dikes and stocks suggest that the fluid transport through these intrusive bodies occurred mostly at near-solidus conditions by means of fluid percolation along grain boundaries. In summary, our results suggest that (1) a large, upper crustal pluton exists ~7 km beneath the Santa Rita and Hanover-Fierro deposits; (2) abundant phenocryst crystallization occurred at this depth level; and (3) this pluton was the main source for the exsolution of ore-forming fluids. However, the investigated rocks have elevated whole-rock Sr/Y ratios, indicating magma fractionation at deep crustal levels. As a result, our preferred model is a combination of the two end-member models introduced above, with most magma fractionation having occurred in the deep crust and with residual, intermediate to felsic melts having ascended and accumulated at 11 to 14 km paleodepth, where they continued to crystallize with comparatively little crystal-liquid separation, before some of these magmas ascended further to shallow levels and quenched to porphyries.

New Mexico↗
USGS2025

Assimilation of reduced carbon triggers platinum alloy saturation in mafic and ultramafic magmas

It is generally observed that magmatic sulfide ores have higher ratios of Pd/Pt than the mantle-like values of their parental magmas. This discrepancy has defied simple explanation because the partitioning behavior of both elements between sulfide and silicate liquids is very similar. Assimilation of sulfur- and carbon-rich country rocks by mafic and ultramafic magmas is considered a critical, if not essential, step in the formation of magmatic base metal sulfide deposits. Although there is general consensus that the assimilation of external sulfur and carbon promotes sulfide saturation, the effect of carbon assimilation on the solubilities of platinum-group elements in natural S-bearing silicate melt has been overlooked. In this study, we investigate the variations of platinum and palladium solubilities during assimilation of graphite and methane through thermodynamic modeling, in comparison with data from an array of highly distinctive magmatic sulfide ore systems representing ages from Archean to Paleozoic, melt compositions from komatiite to basalt, and magmatic settings including lavas, hypabyssal intrusions, plutonic continental arc roots, and plutonic layered intrusions, namely: Raglan, Norilsk-Talnakh, Lac des Iles, and the J-M Reef of the Stillwater Complex. We model assimilation-fractional crystallization processes to estimate the reduction of oxygen fugacity ( ⁠fO2⁠ ) of the melt due to incorporation of graphite and methane. The simulations show that although Pd remains highly soluble during the progressive assimilation of reduced carbon, Pt solubility decreases significantly as the silicate melt becomes increasingly reduced. With less than 8 % of sediment assimilation, Pt alloy may saturate and then deviate from sulfide-undersaturated silicate melts, concomitantly increasing the Pd/Pt value of the remaining melts of the Raglan and Norilsk-Talnakh systems. For the Lac des Iles and Stillwater systems, a higher extent of assimilation is needed to reach Pt saturation because of the relatively carbon-poor nature of the lower crustal rocks. The assimilation of methane volatiles is shown to be more effective than graphite assimilation, and it provides a pathway to Pt alloy fractionation in the absence of detectable amounts of bulk host-rock assimilation. High Pd/Pt values have been documented in many world-class magmatic sulfide deposits whose parental magmas have demonstrably experienced crustal contamination. Our model suggests that although anomalous Pd/Pt values may be explained by other mechanisms such as incongruent melting of preexisting sulfide or differences in the diffusivities of the metals within achieving equilibration, the assimilation of graphite or methane may play an important role in the global occurrence of magmatic sulfide ores with elevated Pd/Pt values.

Economic Geology↗