Geology Reports⌕ Search

USGS · 70195399

Tonsteins and clay-rich layers in coal-bearing intervals of the Eocene Manning formation, east-central Texas

Abstract

Six samples from clay-rich intervals in the coal-bearing upper part of the Eocene Manning Formation were analyzed by scanning-electron microscopy and energy-dispersive X-ray fluorescence to determine the origin of minerals in the samples. Two samples were from surface-mine exposures of the 3500 coal bed near Bryan, Texas, and the remaining samples were from an exposure of a correlative interval at the Lake Somerville spillway about 60 km (37 mi) southwest of Bryan. Preliminary data suggest that both a 2-cm-thick (0.75-in) claystone from the upper part of the 3500 bed and the upper part of an 11-cm-thick (4.25-in) mudstone from the floor of the lower coal bed at the spillway were derived from volcanic ash falls. Both clay layers identified as possible tonsteins are composed of kaolinite and accessory quartz, euhedral to subhedral zircon, feldspars, and Ca-Al phosphates (crandallite?). Both alkali and plagioclase feldspars are observed in the two samples, but K-feldspar predominates in the upper clay layer of the 3500 bed, and plagioclase, with accessory Ti-bearing biotite, predominates in the sample from the floor of the spillway. These compositional differences suggest two separate volcanic ash falls. The other sampled clay layers contain rounded to subrounded zircons and feldspars in a mixed-layer clay groundmass, which suggests detrital rather than ash-fall origins.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Leslie F. Ruppert, Peter D. Warwick, Sharon S. Crowley, James Pontolillo. 1994. Tonsteins and clay-rich layers in coal-bearing intervals of the Eocene Manning formation, east-central Texas. https://pubs.usgs.gov/publication/70195399

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Correlation of the Eagle Ford Group, Woodbine Group, and equivalent Cenomanian-Turonian Mudstones using regional wireline-log cross sections across the Texas Gulf Coast, U.S.A.

As part of the U.S. Geological Survey’s 2018 hydrocarbon assessment of the Eagle Ford Group and associated Cenomanian-Turonian strata, a series of regional wireline-log cross sections were constructed to examine geologic characteristics of this stratigraphic interval across the Texas Gulf Coast from Mexico to Louisiana. The cross sections were used to help define six continuous assessment units based, in part, on stratigraphic thickness, lateral extent, and lithology. The locations of the strike and dip cross sections were selected to address questions pertinent to the hydrocarbon assessment. Stratigraphic correlation of the Eagle Ford Group and corresponding Cenomanian-Turonian mudstones has been debated for many years, and differences in interpretations remain. Formation tops published in the literature, from IHS Markit TM , as well as information from a commercial biostratigraphic database were used to define consistent criteria to construct these cross sections from interpreted wireline logs. Specific units of interest include the Austin Chalk, upper and lower Eagle Ford Group, mudstones of the Woodbine Group, and the Buda Limestone. Wireline gamma-ray (GR) logs through the Eagle Ford Group have values greater than 100 American Petroleum Institute (API) units in several areas of this study, including the Maverick Basin, the Karnes Trough, and the Brazos Basin. High GR values in mudstones may be interpreted to represent potential organic-rich intervals. These high GR zones provide a criterion to identify the lateral variability in potential Cenomanian-Turonian source rock intervals from South Texas to the Texas-Louisiana border.

Gulf Coast Association of Geological Societies Tra↗

Estimating thermal maturity in the Eagle Ford Shale petroleum system using gas gravity data

Basin-wide datasets that provide information on the geochemical properties of petroleum systems, such as source rock quality, product composition, and thermal maturity, are often difficult to come by or assemble from publicly available data. When published studies are available and include these kinds of properties, they generally have few sampling locations and limited numbers and types of analyses. Therefore, production-related data and engineering parameters can provide useful proxies for geochemical properties that are often widely available across a play and in some states are reported in publicly available or commercial databases. Gas-oil ratios (GOR) can be calculated from instantaneous or cumulative production data and can be related to the source rock geochemical properties like kerogen type (Lewan and Henry, 1999) and thermal maturity (Tian et al., 2013; U.S. Energy Information Administration [EIA], 2014). Oil density or specific gravity (SG), often reported in American Petroleum Institute units (°API = 141.5 /SG – 131.5), can also provide information on source rock thermal maturity, particularly when combined with GOR values in unconventional petroleum systems (Nesheim, 2017).

Gulf Coast Association of Geological Societies Tra↗