Geology Reports⌕ Search

USGS · 70194259

Detection of water and/or hydroxyl on asteroid (16) Psyche

Abstract

In order to search for evidence of hydration on M-type asteroid (16) Psyche, we observed this object in the 3 μ m spectral region using the long-wavelength cross-dispersed (LXD: 1.9–4.2 μ m) mode of the SpeX spectrograph/imager at the NASA Infrared Telescope Facility. Our observations show that Psyche exhibits a 3 μ m absorption feature, attributed to water or hydroxyl. The 3 μ m absorption feature is consistent with the hydration features found on the surfaces of water-rich asteroids, attributed to OH- and/or H 2 O-bearing phases (phyllosilicates). The detection of a 3 μ m hydration absorption band on Psyche suggests that this asteroid may not be a metallic core, or it could be a metallic core that has been impacted by carbonaceous material over the past 4.5 Gyr. Our results also indicate rotational spectral variations, which we suggest reflect heterogeneity in the metal/silicate ratio on the surface of Psyche.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Driss Takir, Vishnu Reddy, Juan A. Sanchez, Michael K. Shepard, Joshua P. Emery. 2016-12-28. Detection of water and/or hydroxyl on asteroid (16) Psyche. https://doi.org/10.3847/1538-3881%2F153%2F1%2F31

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Disk-integrated thermal properties of Ceres measured at the millimeter wavelengths

We observed Ceres at three epochs in 2015 November and 2017 September and October with Atacama Large Millimeter/submillimeter Array (ALMA) 12 m array and in 2017 October with the ALMA Compact Array (ACA), all at ~265 GHz continuum (wavelengths of ~1.1 mm) to map the temperatures of Ceres over a full rotation at each epoch. We also used 2017 October ACA observations to search for HCN. The disk-averaged brightness temperature of Ceres is measured to be between 170 and 180 K during our 2017 observations. The rotational light curve of Ceres shows a double-peaked shape with an amplitude of about 4%. Our HCN search returns a negative result with an upper limit production rate of ~2 × 10 24 molecules s −1 , assuming globally uniform production and a Haser model. A thermophysical model suggests that Ceres's top layer has higher dielectric absorption than lunar-like materials at a wavelength of 1 mm. However, previous observations showed that the dielectric absorption of Ceres decreases toward longer wavelengths. Such distinct dielectric properties might be related to the hydrated phyllosilicate composition of Ceres and possibly abundant micrometer-sized grains on its surface. The thermal inertia of Ceres is constrained by our modeling as likely being between 40 and 160 thermal inertia units, much higher than previous measurements at infrared wavelengths. Modeling also suggests that Ceres's light curve is likely dominated by spatial variations in its physical or compositional properties that cause changes in Ceres's observed thermal properties and dielectric absorption as it rotates.

Astronomical Journal↗

The architecture of the Cassini division

The Cassini Division in Saturn's rings contains a series of eight named gaps, three of which contain dense ringlets. Observations of stellar occultations by the Visual and Infrared Mapping Spectrometer onboard the Cassini spacecraft have yielded 40 accurate and precise measurements of the radial position of the edges of all of these gaps and ringlets. These data reveal suggestive patterns in the shapes of many of the gap edges: the outer edges of the five gaps without ringlets are circular to within 1 km, while the inner edges of six of the gaps are eccentric, with apsidal precession rates consistent with those expected for eccentric orbits near each edge. Intriguingly, the pattern speeds of these eccentric inner gap edges, together with that of the eccentric Huygens Ringlet, form a series with a characteristic spacing of 006 day -1 . The two gaps with non-eccentric inner edges lie near first-order inner Lindblad resonances (ILRs) with moons. One such edge is close to the 5:4 ILR with Prometheus, and the radial excursions of this edge do appear to have an m = 5 component aligned with that moon. The other resonantly confined edge is the outer edge of the B ring, which lies near the 2:1 Mimas ILR. Detailed investigation of the B-ring-edge data confirm the presence of an m = 2 perturbation on the B-ring edge, but also show that during the course of the Cassini Mission, this pattern has drifted backward relative to Mimas. Comparisons with earlier occultation measurements going back to Voyager suggest the possibility that the m = 2 pattern is actually librating relative to Mimas with a libration frequency L 006 day -1 (or possibly 012 day -1 ). In addition to the m = 2 pattern, the B-ring edge also has an m = 1 component that rotates around the planet at a rate close to the expected apsidal precession rate (?? ?? ?? B ??? 5.??06 day -1 ). Thus, the pattern speeds of the eccentric edges in the Cassini Division can be generated from various combinations of the pattern speeds of structures observed on the edge of the B ring: ?? p = ?? ?? ?? B -jL for j = 1, 2, 3, ???, 7. We therefore suggest that most of the gaps in the Cassini Division are produced by resonances involving perturbations from the massive edge of the B ring. We find that a combination of gravitational perturbations generated by the radial excursions in the B-ring edge and the gravitational perturbations from the Mimas 2:1 ILR yields terms in the equations of motion that should act to constrain the pericenter location of particle orbits in the vicinity of each of the eccentric inner gap edges in the Cassini Division. This alignment of pericenters could be responsible for forming the Cassini-Division Gaps and thus explain why these gaps are located where they are. ?? 2010. The American Astronomical Society. All rights reserved.

Astronomical Journal↗

Determining Titan's spin state from Cassini RADAR images

For some 19 areas of Titan's surface, the Cassini RADAR instrument has obtained synthetic aperture radar (SAR) images during two different flybys. The time interval between flybys varies from several weeks to two years. We have used the apparent misregistration (by 10-30 km) of features between separate flybys to construct a refined model of Titan's spin state, estimating six parameters: north pole right ascension and declination, spin rate, and these quantities' first time derivatives We determine a pole location with right ascension of 39.48 degrees and declination of 83.43 degrees corresponding to a 0.3 degree obliquity. We determine the spin rate to be 22.5781 deg day -1 or 0.001 deg day-1 faster than the synchronous spin rate. Our estimated corrections to the pole and spin rate exceed their corresponding standard errors by factors of 80 and 8, respectively. We also found that the rate of change in the pole right ascension is -30 deg century-1, ten times faster than right ascension rate of change for the orbit normal. The spin rate is increasing at a rate of 0.05 deg day -1 per century. We observed no significant change in pole declination over the period for which we have data. Applying our pole correction reduces the feature misregistration from tens of km to 3 km. Applying the spin rate and derivative corrections further reduces the misregistration to 1.2 km.

Astronomical Journal↗