Geology Reports⌕ Search

USGS · 70192453

Magmatism, ash-flow tuffs, and calderas of the ignimbrite flareup in the western Nevada volcanic field, Great Basin, USA

Abstract

The western Nevada volcanic field is the western third of a belt of calderas through Nevada and western Utah. Twenty-three calderas and their caldera-forming tuffs are reasonably well identified in the western Nevada volcanic field, and the presence of at least another 14 areally extensive, apparently voluminous ash-flow tuffs whose sources are unknown suggests a similar number of undiscovered calderas. Eruption and caldera collapse occurred between at least 34.4 and 23.3 Ma and clustered into five ∼0.5–2.7-Ma-long episodes separated by quiescent periods of ∼1.4 Ma. One eruption and caldera collapse occurred at 19.5 Ma. Intermediate to silicic lavas or shallow intrusions commonly preceded caldera-forming eruptions by 1–6 Ma in any specific area. Caldera-related as well as other magmatism migrated from northeast Nevada to the southwest through time, probably resulting from rollback of the formerly shallow-dipping Farallon slab. Calderas are restricted to the area northeast of what was to become the Walker Lane, although intermediate and effusive magmatism continued to migrate to the southwest across the future Walker Lane. Most ash-flow tuffs in the western Nevada volcanic field are rhyolites, with approximately equal numbers of sparsely porphyritic (≤15% phenocrysts) and abundantly porphyritic (∼20–50% phenocrysts) tuffs. Both sparsely and abundantly porphyritic rhyolites commonly show compositional or petrographic evidence of zoning to trachydacites or dacites. At least four tuffs have volumes greater than 1000 km 3 , with one possibly as much as ∼3000 km 3 . However, the volumes of most tuffs are difficult to estimate, because many tuffs primarily filled their source calderas and/or flowed and were deposited in paleovalleys, and thus are irregularly distributed. Channelization and westward flow of most tuffs in paleovalleys allowed them to travel great distances, many as much as ∼250 km (original distance) to what is now the western foothills of the Sierra Nevada, which was not a barrier to westward flow of ash flows at that time. At least three tuffs flowed eastward across a north-south paleodivide through central Nevada. That tuffs could flow significant distances apparently uphill raises questions about the absolute elevation of the region and the elevation, relief, and location of the paleodivide. Calderas are equant to slightly elongate, at least 12 km in diameter, and as much as 35 km in longest dimension. Exceptional exposure of two caldera complexes that resulted from extensional faulting and tilting show that calderas subsided as much as 5 km as large piston-like blocks; caldera walls were vertical to steeply inward dipping to depths ≥4–5 km, and topographic walls formed by slumping of wall rock into the caldera were only slightly outboard (≤1 km) of structural margins. Most calderas show abundant post-collapse magmatism expressed as resurgent intrusions, ring-fracture intrusions, or intracaldera lavas that are closely related temporally (∼0–0.5 Ma younger) to caldera formation. Granitoid intrusions, which were emplaced at paleodepths ranging from <1 to ∼7 km, are compositionally similar to both intracaldera ash-flow tuffs and post-caldera lavas. Therefore in the western Nevada volcanic field, erupted caldera-forming tuffs commonly were the upper parts of large magma chambers that retained considerable volumes of magma after tuff eruption. Several calderas in the western Nevada volcanic field hosted large hydrothermal systems and underwent extensive hydrothermal alteration. Different types of hydrothermal systems (neutral-pH alkali-chloride and acid or low-pH magmatic-hydrothermal) may reflect proximity to (depth of) large resurgent intrusions. With the exception of the giant Round Mountain epithermal gold deposit, few known caldera-related hydrothermal systems are strongly mineralized. Major middle Cenozoic precious and base metal mineral deposits in and along the margins of the western Nevada volcanic field are mostly related to intrusive rocks that preceded caldera-forming eruptions.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 34.59704151614417° to 42.68243539838623° latitude; -122.4755859375° to -111.005859375° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Christopher D. Henry, David A. John. 2013. Magmatism, ash-flow tuffs, and calderas of the ignimbrite flareup in the western Nevada volcanic field, Great Basin, USA. https://doi.org/10.1130/ges00867.1

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Ignimbrites of the Sour Creek dome, Yellowstone volcano, USA: Implications for the Lava Creek Tuff eruption and Yellowstone Caldera

Field observations plus sanidine compositional and 40 Ar/ 39 Ar age data collected on rocks from the Sour Creek dome (SCD) area of Yellowstone volcano (United States) serve to identify five new ignimbrite packages with ages (average 631.5 ± 0.9 ka) that are analytically indistinguishable from those of the Lava Creek Tuff (LCT), challenging the current framework of two LCT eruptive members. Newly recognized package 1 occurs as LCT-aged recycled clasts within a proximal lag breccia, reflecting a major time break in the LCT eruption sequence. Conformably above, the scoria-bearing ignimbrite of package 2 is extensively found in the dome, having been previously mis-mapped as Huck-leberry Ridge Tuff and LCT member A. To the south, package 3 is a crystal-rich, densely welded ignimbrite (inferred to be younger than package 2) that is conformably overlain by package 4, a fine-grained ignimbrite that contains abundant clasts of recycled tuff. Lastly, the topographically highest parts of the dome are made up of package 5, a multicomponent ignimbrite containing scoria, recycled clasts, and pumices, potentially correlative with package 2 and/or package 4. Cathodoluminescence imaging and zoning assessment was integrated with sanidine geochemistry from all five packages, including their recycled clasts. Four of the five packages were sourced from separate magmatic bodies within a larger plumbing system, each defined by their sanidine Ba distributions and componentry. Although the SCD was originally mapped as a resurgent dome and is actively deforming today, faults cutting the region show comparable offsets for NW-SE “resurgent faulting” as for orthogonal NE-SW faulting, the latter of which also cuts the 162 ka Elephant Back lava flow. We infer that faulting in the SCD well postdates eruption and that the SCD instead represents a domical accumulation of ignimbrite, not a resurgent structure. The abundance of recycled materials (and absence of Absaroka country rocks) in the SCD ignimbrites implies that vent locations were well inboard of the mapped caldera boundary, with some potentially along the line of the Yellowstone River, requiring a revision of the currently accepted LCT caldera outline. The LCT eruptive events were thus far more complex than currently recognized, with multiple deposits fed from multiple magma bodies over a time scale that cannot be resolved by radiometric dating.

Wyoming↗

Syn-magmatic subsidence during the early stages of continental rifting in the Mesoproterozoic—A reanalysis of legacy data for the Midcontinent Rift, western Lake Superior

The Midcontinent Rift system (ca. 1.1 Ga) is a 2000-km-long series of elongated volcanic and sedimentary troughs and associated intrusive centers exposed chiefly in the Lake Superior region of North America. The rift system represents a long history of intense magmatism and subsequent sedimentation that was arrested by far-field tectonic events before sea-floor spreading was established. The premature cessation preserved a record of processes related to the beginning of continental rifting. The rift system under Lake Superior has been long studied using seismic-reflection data collected as part of the Great Lakes International Multidisciplinary Program on Crustal Evolution (GLIMPCE). We reexamine GLIMPCE Line C by developing a detailed velocity model for time to depth conversion constrained by other legacy data. We corroborate the model and develop a geologic interpretation using gravity and magnetic modeling and ties to geology mapped onshore. We recognize superposed subsiding sedimentary and volcanic basins for the southern half of the Line C depth section. This interpretation differs from previous paradigms that show major crustal faults that bound half-grabens or full grabens. We conclude that high-velocity (6.9 km/s) intrusive zones rather than major crustal faults border the sides of the basins. We speculate that the volcanic basin represents the initiation of seaward dipping reflectors. The syn-magmatic subsidence can be explained by dike injection and volcanic loading. Discrete lava basins throughout the region likely subsided at different times in a disorganized manner along the rift trend, raising questions about the long-term role of lithospheric thinning and melt generation.

Michigan, Minnesota, Ontario, Wisconsin↗

Characterizing changes in postfire debris-flow hazard as burned areas recover

Emergency assessments of postfire debris-flow hazards that are performed by the U.S. Geological Survey (USGS) provide estimates of debris-flow likelihood and rainfall triggering conditions that are used for evaluating and managing runoff-generated debris-flow hazards in recently burned areas throughout the western United States. Although the immediate postfire period, within roughly one year after fire, is typically the most susceptible to runoff-generated debris flows, the hazard evolves in time and space as the burned area recovers. The recovery trajectory a given burned area will take depends on local climate and weather and can be difficult to predict. Some burned areas recover quickly, whereas others experience debris flows for multiple years after fire. As a result, extending our ability to update debris-flow likelihood estimates and rainfall thresholds based on observed recovery of the burned area would be beneficial. We present a method for multi-year runoff-generated debris-flow hazard assessment that leverages the USGS “M1” debris-flow likelihood model and integrates updated, satellite-derived, normalized burn ratio data to estimate vegetation recovery. We predict recovery-aware rainfall thresholds and validate them against a multi-year debris-flow hazard prediction and could be adapted for use with other debris-flow models that incorporate burn severity data.

Arizona, California, Colorado, New Mexico, Washing↗