Selected hydrologic data, upper Sevier River basin, Utah

Carl H. Carpenter; Gerald B. Robinson; Louis Jay Bjorklund

Home/Archive/USGS

USGS · 70190800

Selected hydrologic data, upper Sevier River basin, Utah

Carl H. Carpenter·Gerald B. Robinson·Louis Jay Bjorklund

View original source ↗Export metadata ↓

Abstract

This report is intended to serve two purposes: (1) to make available to the public basic ground-water data useful in planning and studying development of water resources, and (2) to supplement an interpretive report that will be published later. Records were collected during 1961-63 by the U.S. Geological Survey in cooperation with the Utah State Engineer as a part of the investigation of ground-water conditions in the upper Sevier River basin, in parts of Garfield, Iron, Kane, Piute, and Sevier Counties, Utah. The interpretive material will be published in a companion report by Carl H. Carpenter, Gerald B. Robinson, Jr., and Louis J. Bjorklund. This report is most useful in predicting conditions likely to be found in areas that are being considered as well sites. The person considering the new well can spot the proposed site on plate 1 and examine the records of nearby wells and springs as shown in the tables. From table 1 he can find information on wells, including depth, diameter, water level, yield, drawdown, use of water, temperature of water, and depth of perforations. Table 2 gives information on springs such as yield, use of water, temperature, and improvements. From tables 1 and 2 he can note the type of material that yields water in the vicinity. Table 3 shows the historic fluctuations and trends of water levels. Table 4 shows the type of material penetrated by wells. From table 5 he can note the chemical quality of water from wells and springs, and from table 6, the chemical quality of surface water. If the reader decides from his examination that conditions are favorable, he can place an application to drill a well with the State Engineer. If the State Engineer believes unappropriated water is available, the application may be approved after minimum statutory requirements have been satisfied. The report is also useful when planning large-scale developments of water supply. This and other uses of the report will be helped by use of the interpretive report upon its release.

Explore related subjects

Utah Basic-Data Report Report

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Carl H. Carpenter, Gerald B. Robinson, Louis Jay Bjorklund. 1964. Selected hydrologic data, upper Sevier River basin, Utah. https://pubs.usgs.gov/publication/70190800

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS1964

Ground-water data, Sevier Desert, Utah

This report is intended to serve two purposes: (1) to make available to the public basic ground-water data useful in planning and studying development of water resources, and (2) to supplement an interpretive report that will be published later. Records were collected during the period 1935-64 by the U.S. Geological survey in cooperation with the Utah State Engineer as part of the investigation of ground-water conditions in the Sevier Desert, in Juab and Millard Counties, Utah. The interpretive material will be published in a companion report by R. W. Mower and R. D. Feltis. This report is most useful in predicting conditions likely to be found in areas that are being considered as well sites. The person considering the new well can spot the proposed site on plate 1 and examine the records of nearby wells as shown in the tables and figures. From table 1 he can note such things as depth, diameter, water level, yield, use of water, temperature of water, and depth of perforations. By comparing the depth of perforations with the drillers' logs in table 3 he can note the type of material that yields water to the wells. Table 2 and figure 2 show the historic fluctuations and trends of water levels in the vicinity. From table 4 he can note the chemical quality of the water from wells in the vicinity. Table 5 shows the amount of water discharged during 1951-63 from the pumped irrigation, public supply, and industrial wells. If the reader decides from his examination that conditions are favorable, he can place an application to drill a well with the state Engineer. If the State Engineer believes unappropriated water is available, the application may be approved after minimum statutory requirements have been satisfied. The report is also useful when planning large-scale developments of water supply. This and other uses of the report will be helped by use of the interpretive report upon its release.

Utah↗

USGS1963

Ground-water data: Beaver, Escalante, Cedar City, and Parowan Valleys; parts of Washington, Iron, Beaver, and Millard Counties, Utah

This report is intended to serve two purposes: (1) to make available to the public basic ground-water data useful in planning and studying development of water resources, and (2) to supplement an interpretive report that will be published later. Records were collected during the period 1935-62 by the U.S. Geological Survey in cooperation with the Utah State Engineer as part of the investigation of ground-water conditions in the Beaver, Escalante, Cedar City, and Parowan Walleys. This report will include records collected subsequent to data published in earlier reports listed in the bibliography. The interpretive material will be published in a companion report by George W. Sandberg. This report is most useful in predicting conditions likely to be found in areas that are being considered as well sites. The person considering the new well can spot the proposed site on plate 1 and examine the records of nearby wells as shown in the tables and figure 2. From table 1 he can note such things as diameter, depth, water level, yield, use of water, and depth to aquifers in wells in the vicinity, and from the well logs in table 3 he can note the type of material that yields water to the wells. Table 2 gives several years record of yields and pumping levels of irrigation wells, and in table 4 are the chemical analyses of water from wells and springs. Figure 2 shows the historic fluctuations and trends of water levels in the four valleys. If the reader decides from his examination that conditions are favorable, he can place an application to drill a well with the State Engineer. During the past several years, however, the State Engineer has rejected new applications to appropriate water in major portions of Beaver Valley, Milford and Beryl-Enterprise districts in Escalante Valley, and Cedar City Valley. Anyone seeking to initiate a new ground-water right in any of these areas should obtain information from the State Engineer's Office in either Salt Lake City or Cedar City to determine the likelihood of approval of the required application. The report is also useful when planning large-scale developments of water supply. This and other uses of the report will be helped by use of the interpretive report upon its release.

Utah↗

USGS1962

Records of selected wells and springs, selected drillers' logs of wells, and chemical analyses of ground and surface waters, northern Utah Valley, Utah County, Utah

This report is intended to serve two purposes: (1) to make available to the public basic ground-water data useful in planning and studying development of water resources and (2) to supplement an interpretive report that will be published later. Records were collected during the period 1956-59 by the U.S. Geological Survey in cooperation with the Utah State Engineer as a part of the investigation of the ground-water resources of northern Utah Walley in Utah County, Utah. Some earlier data and other information in the tables are from published reports on the ground-water resources of northern Utah Walley. The interpretive material will be published cooperatively by the U.S. Geological Survey and the Utah State Engineer in a companion report by Seymour Subitzky. This report is most useful in predicting conditions likely to be found in areas that are being considered as well sites. The person considering the new well can spot the proposed site on plate 1 and examine the records of nearby wells as shown on the tables. From tables 1, 2, and h he can note the type of material that yields water to wells in the vicinity; from table 2 he can note (1) the depth and diameter of wells in the vicinity and the yield of some of those wells, and (2) the depth to water or the feet of water pressure in the vicinity; from table 3 and plate 1 he may note the location of springs and the conditions related to the occurrence of these springs; and from tables 5 and 6 he may note the chemical quality of the water from wells and from some surface sources, and the uses of these waters. If the reader decides from his examination that conditions are favorable, he may place an application to drill a well with the State Engineer. If the State Engineer believes unappropriated water is available, the application may be approved after minimum statutory requirements have been satisfied. The report is also useful when planning large-scale developments of water supply. This and other uses of the report will be helped by use of the interpretive report upon its release.

Utah↗