Geology ReportsSearch

USGS · 70189256

Rip currents and alongshore flows in single channels dredged in the surf zone

Abstract

To investigate the dynamics of flows near nonuniform bathymetry, single channels (on average 30 m wide and 1.5 m deep) were dredged across the surf zone at five different times, and the subsequent evolution of currents and morphology was observed for a range of wave and tidal conditions. In addition, circulation was simulated with the numerical modeling system COAWST, initialized with the observed incident waves and channel bathymetry, and with an extended set of wave conditions and channel geometries. The simulated flows are consistent with alongshore flows and rip-current circulation patterns observed in the surf zone. Near the offshore-directed flows that develop in the channel, the dominant terms in modeled momentum balances are wave-breaking accelerations, pressure gradients, advection, and the vortex force. The balances vary spatially, and are sensitive to wave conditions and the channel geometry. The observed and modeled maximum offshore-directed flow speeds are correlated with a parameter based on the alongshore gradient in breaking-wave-driven-setup across the nonuniform bathymetry (a function of wave height and angle, water depths in the channel and on the sandbar, and a breaking threshold) and the breaking-wave-driven alongshore flow speed. The offshore-directed flow speed increases with dissipation on the bar and reaches a maximum (when the surf zone is saturated) set by the vertical scale of the bathymetric variability.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Melissa Moulton, Steve Elgar, Britt Raubenheimer, John C. Warner, Nirnimesh Kumar. 2017-05-08. Rip currents and alongshore flows in single channels dredged in the surf zone. https://doi.org/10.1002/2016jc012222

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Observations of flocs in an estuary and implications for computation of settling velocity

The settling velocity ( w s ) in estuarine environments can impact whether a region is eroding or accreting sediment on the bed, yet determining this rate can be an indirect process requiring a number of assumptions. Accurate determination of w s is especially needed for numerical models to reproduce observed sediment concentrations at the appropriate timescale. We collected information on suspended sediment flocculation at a channel site (13 m deep) and a shallows site (4 m deep) within South San Francisco Estuary, alongside timeseries of flow, wave statistics, turbulent shear, and bottle samples analyzed for both w s and particle size. Using the measurements of floc size and settling velocity, we performed a sensitivity analysis on the unknown parameters in the general explicit formula for settling velocity. The collected particle size distribution data show that multiple classes of flocs are present; these are characterized as flocculi, microflocs, and macroflocs. We show that w s of flocculi is closest to w s for the full distribution. The determined parameter values lead to near-bed mass-weighted settling velocities (standard deviation) of 1.18 (0.55) and 0.22 (0.15) mm/s at the channel and shallows sites, respectively. Modeling efforts can use this work to help select an appropriate sediment model and parameter values.

California

Modeled coastal-ocean pathways of land-sourced contaminants in the aftermath of Hurricane Florence

Extreme precipitation during Hurricane Florence, which made landfall in North Carolina in September 2018, led to breaches of hog waste lagoons, coal ash pits, and wastewater facilities. In the weeks following the storm, freshwater discharge carried pollutants, sediment, organic matter, and debris to the coastal ocean, contributing to beach closures, algae blooms, hypoxia, and other ecosystem impacts. Here, the ocean pathways of land-sourced contaminants following Hurricane Florence are investigated using the Regional Ocean Modeling System (ROMS) with a river point source with fixed water properties from a hydrologic model (WRF-Hydro) of the Cape Fear River Basin, North Carolina's largest watershed. Patterns of contaminant transport in the coastal ocean are quantified with a finite duration tracer release based on observed flooding of agricultural and industrial facilities. A suite of synthetic events also was simulated to investigate the sensitivity of the river plume transport pathways to river discharge and wind direction. The simulated Hurricane Florence discharge event led to westward (downcoast) transport of contaminants in a coastal current, along with intermittent storage and release of material in an offshore (bulge) or eastward (upcoast) region near the river mouth, modulated by alternating upwelling and downwelling winds. The river plume patterns led to a delayed onset and long duration of contaminants affecting beaches 100 km to the west, days to weeks after the storm. Maps of the onset and duration of hypothetical water quality hazards for a range of weather conditions may provide guidance to managers on the timing of swimming/shellfishing advisories and water quality sampling.

Journal of Geophysical Research: Oceans

Bayesian hierarchical modeling for probabilistic estimation of tsunami amplitude from far-field earthquake sources

Evaluation of tsunami disaster risk for a coastal region requires reliable estimation of tsunami hazard, for example, wave amplitude close to the shore. Observed tsunami data are scarce and have poor spatial coverage, and for this reason probabilistic tsunami hazard analysis (PTHA) traditionally relies on numerical simulation of “synthetic” tsunami generation and propagation toward the coast. Such an approach has been extensively studied in the past and it is widely recognized as an important disaster-risk mitigation tool. PTHA can not only provide less uncertain and spatially coherent hazard estimates in comparison with classical empirical data analysis which is restricted at the tide gauge stations, but also local inundation information. In this paper, we explore a purely statistical alternative to traditional PTHA for evaluation of tsunami amplitude hazard. Here, we use tide gauge measurements of tsunami amplitude along the western United States, specifically California and Oregon, and develop a spatial Bayesian hierarchical model (BHM) to assess tsunami hazard from far-field earthquake sources at various recurrence intervals. The configuration of our model incorporates latent Gaussian fields that utilize information on the distance between tide gauges as well as on the continental shelf width, that is, a covariate linked to potential dissipative effects on wave energy as the tsunami travels over shallow water. Through our BHM, we produce spatially continuous probabilistic maps of far-field tsunami hazard which can aid comprehensive tsunami disaster risk reduction and management.

California, Oregon, Washington