Geology Reports⌕ Search

USGS · 70187576

Land cover mapping of the Upper Kuskokwim Resource Management Area, Alaska, using Landsat and a digital data base approach

Abstract

Digital land cover and terrain data for the Upper Kuskokwim Resource Management Area in south-central Alaska were produced by the U.S. Geological Survey for the U.S. Bureau of Land Management. These and other environmental data were incorporated into a digital data base to assist in the production of a land cover map and to facilitate in the management and planning of the area. The digital data base is registered to a 50 m Universal Transverse Mercator grid and is stored on computer-compatible tape to facilitate transfer between different processing systems. The data base includes land cover classifications, terrain models (elevation, slope, aspect, solar illumination), autumn and winter Landsat multi-spectral scanner data, soils and surficial geology data, and area boundary. The spectral classification of Landsat multi-spectral scanner data resulted in seven major classes and 24 subclasses. Major classes were forest, shrubland, dwarf scrub, herbaceous, barren, water, and other.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Carl Markon. 1992. Land cover mapping of the Upper Kuskokwim Resource Management Area, Alaska, using Landsat and a digital data base approach. https://doi.org/10.1080/07038992.1992.10855308

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Landsat TM memory effect characterization and correction

Before radiometric calibration of Landsat Thematic Mapper (TM) data can be done accurately, it is necessary to minimize the effects of artifacts present in the data that originate in the instrument's signal processing path. These artifacts have been observed in downlinked image data since shortly after launch of Landsat 4 and 5. However, no comprehensive work has been done to characterize all the artifacts and develop methods for their correction. In this paper, the most problematic artifact is discussed: memory effect (ME). Characterization of this artifact is presented, including the parameters necessary for its correction. In addition, a correction algorithm is described that removes the artifact from TM imagery. It will be shown that this artifact causes significant radiometry errors, but the effect can be removed in a straightforward manner.

Canadian Journal of Remote Sensing↗

Landsat-7 Enhanced Thematic Mapper plus radiometric calibration

Landsat-7 is currently being built and tested for launch in 1998. The Enhanced Thematic Mapper Plus (ETM+) sensor for Landsat-7, a derivative of the highly successful Thematic Mapper (TM) sensors on Landsats 4 and 5, and the Landsat-7 ground system are being built to provide enhanced radiometric calibration performance. In addition, regular vicarious calibration campaigns are being planned to provide additional information for calibration of the ETM+ instrument. The primary upgrades to the instrument include the addition of two solar calibrators: the full aperture solar calibrator, a deployable diffuser, and the partial aperture solar calibrator, a passive device that allows the ETM+ to image the sun. The ground processing incorporates for the first time an off-line facility, the Image Assessment System (IAS), to perform calibration, evaluation and analysis. Within the IAS, processing capabilities include radiometric artifact characterization and correction, radiometric calibration from the multiple calibrator sources, inclusion of results from vicarious calibration and statistical trending of calibration data to improve calibration estimation. The Landsat Product Generation System, the portion of the ground system responsible for producing calibrated products, will incorporate the radiometric artifact correction algorithms and will use the calibration information generated by the IAS. This calibration information will also be supplied to ground processing systems throughout the world.

Canadian Journal of Remote Sensing↗

Land cover change on the Seward Peninsula: The use of remote sensing to evaluate the potential influences of climate warming on historical vegetation dynamics

Vegetation on the Seward Peninsula, Alaska, which is characterized by transitions from tundra to boreal forest, may be sensitive to the influences of climate change on disturbance and species composition. To determine the ability to detect decadal-scale structural changes in vegetation. Change Vector Analysis (CVA) techniques were evaluated for Landsat Thematic Mapper (TM) imagery of the Seward Peninsula from 1986 to 1999. Scenes were geographically corrected to sub-pixel accuracy and then radiometrically rectified. Between the 1986 and 1992 satellite scenes, the CVA detected changes in direction and magnitude of the two indices (TM Band 4/TM Band 3. TM Band 5). For Row 14, change was detected for 135,518 ha and for Row 15, change was detected for 111,831 ha. Between the 1992 and 1999 scenes, change was detected by CVA for 93,278 ha. CVA results and photo interpretation together show that shrub advance is approximately 100 metres in valleys north of the Bendeleben Mountains and that shrubs have increased along riverbed bottoms. Across Path 78 Row 14 and 15, the unsupervised classification detected that 55% of the pixels changed between 1986 and 1992. Overall, approximately 759,610 ha changed to a class with a more developed canopy and only 268,132 ha changed to a class with a less developed canopy. Thus, the change detection analysis based on the unsupervised classification indicates that land-cover change on the Seward Peninsula was predominantly in the direction of increased shrubbiness. Taken together, our comparison of CVA results, unsupervised classification results, and visual interpretation of aerial photographs suggests that shrub cover may be increasing on the Seward Peninsula, which is consistent with results from experimental warming in tundra. The use of both CVA and unsupervised classification together provided a more powerful interpretation of change than either method alone in transitional regions between tundra and boreal forest.

Canadian Journal of Remote Sensing↗