Interpretation of hydraulic conductivity in a fractured-rock aquifer over increasingly larger length dimensions

Allen M. Shapiro; Jeffery Ladderud; Richard M. Yager

doi:10.1007/s10040-015-1285-7

Home/Archive/USGS

USGS · 70186870

Interpretation of hydraulic conductivity in a fractured-rock aquifer over increasingly larger length dimensions

Allen M. Shapiro·Jeffery Ladderud·Richard M. Yager

View original source ↗Export metadata ↓

Abstract

A comparison of the hydraulic conductivity over increasingly larger volumes of crystalline rock was conducted in the Piedmont physiographic region near Bethesda, Maryland, USA. Fluid-injection tests were conducted on intervals of boreholes isolating closely spaced fractures. Single-hole tests were conducted by pumping in open boreholes for approximately 30 min, and an interference test was conducted by pumping a single borehole over 3 days while monitoring nearby boreholes. An estimate of the hydraulic conductivity of the rock over hundreds of meters was inferred from simulating groundwater inflow into a kilometer-long section of a Washington Metropolitan Area Transit Authority tunnel in the study area, and a groundwater modeling investigation over the Rock Creek watershed provided an estimate of the hydraulic conductivity over kilometers. The majority of groundwater flow is confined to relatively few fractures at a given location. Boreholes installed to depths of approximately 50 m have one or two highly transmissive fractures; the transmissivity of the remaining fractures ranges over five orders of magnitude. Estimates of hydraulic conductivity over increasingly larger rock volumes varied by less than half an order of magnitude. While many investigations point to increasing hydraulic conductivity as a function of the measurement scale, a comparison with selected investigations shows that the effective hydraulic conductivity estimated over larger volumes of rock can either increase, decrease, or remain stable as a function of the measurement scale. Caution needs to be exhibited in characterizing effective hydraulic properties in fractured rock for the purposes of groundwater management.

Explore related subjects

Hydrogeology Journal Article

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Allen M. Shapiro, Jeffery Ladderud, Richard M. Yager. 2015-07-23. Interpretation of hydraulic conductivity in a fractured-rock aquifer over increasingly larger length dimensions. https://doi.org/10.1007/s10040-015-1285-7

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2025

Review: The hydrogeology of critical mineral resources relevant to the energy transition

Attaining the goals of the international treaty on climate change (the Paris Agreement) will greatly increase the demand for the critical minerals required to implement clean-energy technologies. This poses both challenges and opportunities to the hydrogeologic community from several perspectives. Here, important insights that the hydrogeological sciences have to offer for mineral exploration, mineral production, and addressing environmental issues related to mining and mine decommissioning are summarized. This study focuses on copper, cobalt, lithium, and rare earths to represent the broad spectrum of critical minerals and illustrate their relevance by referring to projected demands and production rates. The current understanding of the hydrogeologic processes that form major deposits of these minerals are then summarized. Ore is defined as the naturally occurring material from which minerals of economic value can be extracted, where most ore deposits are the products of complex hydrogeologic couplings between fluid flow, heat transport, solute transport, chemical reactions, and mechanical deformation. Exploration models for the discovery of deeper, hidden deposits are potentially informed by hydrogeologic theory and hydrogeochemical processes. Hydrogeologic understanding and methods are also essential to production and recovery. Longstanding challenges are mine dewatering and (conversely) mine water supply, as well as mineral-extraction practices such as spoil heap leaching and in situ mining. New challenges arise from element extraction from subsurface brines. Finally, the quantity of water use and potential environmental impacts of mining on water quality are at the core of ‘social license’: the approval and acceptance of society to mining activities.

Hydrogeology Journal↗

USGS2025

Controls on water quality below a reclaimed surface coal mine, southeastern Montana

Coal mining and reclamation can have a profound influence on hydrogeologic systems, with clear consequences for groundwater quality, yet their long-term influence on downgradient water quality over time following reclamation is less well documented. Geochemical trends were evaluated in water quality downgradient of a fully reclaimed landscape at the former Big Sky Mine in the Rosebud Creek watershed (southeastern Montana, USA), over a 3-year period (2020–2022), including bond release in 2022. Within 6 km downgradient from the reclaimed area, sulfate concentrations decreased from approximately 3500 to 1800 mg l −1 within the Miller Coulee alluvial aquifer. Major ions, δ 34 S SO4 values, and residence time tracers suggest that the observed decreases in sulfate concentration result from a combination of dilution by mixed-age inflows and incomplete transit of the high salinity plume from the mine boundary. Both bedrock and alluvial aquifers of the Rosebud Creek corridor contained contributions of millennia-old regional groundwater, which may serve to mitigate mine-derived high salinity waters. Rosebud Creek, which traverses the outflow zone of Miller Coulee in the study area, exhibited high sulfate concentrations during low flows and consistent downgradient increases in sulfate concentration. The possibility of plume dynamics in Miller Coulee suggests that the greatest water quality impacts may not yet have reached Rosebud Creek.

Montana↗

USGS2023

Arizona Groundwater Explorer: Interactive maps for evaluating the historical and current groundwater conditions in wells in Arizona, USA

Groundwater is an important water source in Arizona, accounting for about 41% of water use in this mostly arid-to-semiarid state in the southwestern United States, and the availability of groundwater resources in the state is a concern. To provide accessible information from depth-to-groundwater data, a series of web-based interactive maps were developed, called the Arizona Groundwater Explorer (AGEx). Scripts were written to harmonize and synthesize groundwater datasets from the two largest publicly available sources, subset these data to address different groundwater availability questions, and display the results in online, interactive maps. The combined dataset contained 1,820,122 depth-to-groundwater measurements from 1891 through 2022 from 41,918 wells in Arizona. Data views are provided for 20 topics, including recent (2020 or later) depth to groundwater (4,569 wells), historical (pre-1950) depth to groundwater (4,287 wells), wells with long-term (≥50 years) records (1,183 wells), wells with recent groundwater level decline (277 wells), wells with recent groundwater level rise (120 wells), and linear trends in groundwater levels over ten 10-year periods (number of wells ranging from 341 in 1978–1987 to 1,208 in 2003–2012), among others. With ongoing drought in the region resulting in declining surface-water supplies in Arizona, groundwater may play an even larger role in satisfying water needs in the state. The AGEx series of maps provides a nonspecialist audience with an improved understanding of historical, current, and changes in groundwater levels in Arizona.

Arizona↗