Geology ReportsSearch

USGS · 70185537

Arsenic in ground water of the Western United States

Abstract

Natural occurrences of ground water with moderate (10 to 50 micrograms per liter) to high (greater than 50 micrograms per liter) concentrations of arsenic are common throughout much of the Western United States. High concentrations of arsenic are generally associated with one of four geochemical environments: (1) basin-fill deposits of alluvial-lacustrine origin, particularly in semiarid areas, (2) volcanic deposits, (3) geothermal systems, and (4) uranium and gold-mining areas. These findings are based on an extensive literature review, compilation of unpublished reports and data, and the review of data bases containing more than 7,000 analyses of ground-water samples for arsenic. In the first two environments, arsenic appears to be associated with sediments derived, in part, from volcanic rocks of intermediate to acidic composition. Dissolved arsenic concentrations in water from volcanic aquifers in the same regions, however, may be low (less than 10 micrograms per liter). Solid phases (minerals, amorphous solids, and sedimentary organic matter) that supply the dissolved arsenic have not been identified in most areas. Alluvial and lacustrine sedimentary deposits appear to be an important source of arsenic in volcanic areas (such as Lane County, Oregon) and in areas underlain by basin-fill deposits (such as Carson Desert in Nevada and the Tulare Lake basin in California). Mobilization of arsenic in sedimentary aquifers may be, in part, a result of changes in the geochemical environment due to agricultural irrigation. In the deeper subsurface, elevated arsenic concentrations are associated with compaction caused by groundwater withdrawals.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 31.353636941500987° to 49.38237278700955° latitude; -125.41992187499999° to -104.4140625° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Alan H. Welch, Michael S. Lico, Jennifer L. Hughes. 2006-03-21. Arsenic in ground water of the Western United States. https://doi.org/10.1111/j.1745-6584.1988.tb00397.x

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Computing flow-field distortion coefficients from well-construction and formation properties

Direct measurements of groundwater velocity made with borehole flowmeters in screened wells must be compensated for the effects of flow-field distortion (also known as borehole acceleration). A theoretical equation developed by Drost et al. (1968) and simple inputs describing hydraulic properties of well construction and geologic formation were programmed into an Excel workbook to facilitate computation by groundwater-flowmeter users. Tables describing the physical and hydraulic properties for well constructions and gravel pack media are provided with an example to facilitate use of the workbook. Groundwater flowlines converge or diverge as they pass from a geologic formation, through a gravel pack and well screen. The extent of flowline convergence or divergence and the value of the flow-field distortion coefficient is related to the relative changes in hydraulic conductivity of the well screen, gravel pack, and geologic formation. Convergence or divergence is accompanied by acceleration or deceleration of groundwater. Direct measurements of groundwater velocity at the center of the monitoring well can be adjusted to provide a more accurate estimate of velocity in the formation by applying a correction for flow-field distortion. Variables required to compute the flow-field distortion coefficient include the hydraulic conductivity of the gravel pack, well screen, and the geologic formation surrounding the well screen; the borehole radius, and the inside radius and outside radius of the well screen.

Groundwater

Deep groundwater total dissolved solids mapping in the Dakota Group, Williston Basin, USA

Growing concern about the quantity of available freshwater around the world has led to interest in surveying groundwater total dissolved solids (TDS) below water well depths. Deep TDS has not been systematically mapped, and there is much to learn about the distribution and controls on deeper groundwater. In sedimentary basins across the United States, groundwater resources often overlie hydrocarbon resources, providing an opportunity to use borehole geophysical data collected for hydrocarbons to characterize groundwater and pore space resources. This study adapts a recently developed subsurface geostatistical and geophysical modeling approach to continuously map groundwater TDS, porosity, and temperature in the Dakota Group of the Williston Basin—an undercharacterized regional aquifer system overlying deeper hydrocarbon reservoirs. Groundwater TDS in the Dakota Group ranges from approximately 4800 to 26,900 mg/L. TDS patterns are stratified with higher TDS in the lower and upper Dakota Group, and relatively lower TDS in the middle Dakota Group. The lower TDS in the middle zone may represent a preferential regional flow path for lower-TDS meteoric recharge from the west. The alternating pattern of TDS may also be evidence of higher-TDS inflows into the Dakota Group from underlying and potentially from overlying aquifers. Porosity is lower near the center of the Williston Basin and tends to be higher to the east, which may be related to grain size distributions. The new regional TDS and porosity modeling serves as a quantitative reference for water users and provides supporting evidence for hypotheses on Dakota Group recharge.

Montana, North Dakota, South Dakota