Geology Reports⌕ Search
Home/Archive/USGS

USGS · 70178847

Hydrologic reconnaissance of Curlew Valley, Utah and Idaho

E.L. Bolke·Don Price
View original source ↗Read source document ↗Export metadata ↓

Abstract

This report is the fifth in a series of reports prepared by the U. S. Geological Survey in cooperation with the Utah Department of Natural Resources, Division of Water Rights, that describe the water resources of selected basins in western Utah. Previously published reports in this series are listed on page 35 and the areas covered by them are shown in figure 1. The purpose of this report is to present available hydrologic data on the Utah part of Curlew Valley, to provide an evaluation of the potential water-resource development of the valley, and to identify needed studies that would help provide an understanding of the valley's water supply.

Explore related subjects

Technical PublicationReport
90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 41.56819689811343° to 42.8699254870066° latitude; -113.57391357421875° to -112.35443115234375° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

E.L. Bolke, Don Price. 1969. Hydrologic reconnaissance of Curlew Valley, Utah and Idaho. https://pubs.usgs.gov/publication/70178847

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2003

Hydrology and simulation of ground-water flow in Kamas Valley, Summit County, Utah

Kamas Valley, Utah, is located about 50 miles east of Salt Lake City and is undergoing residential development. The increasing number of wells and septic systems raised concerns of water managers and prompted this hydrologic study. About 350,000 acre-feet per year of surface water flows through Kamas Valley in the Weber River, Beaver Creek, and Provo River, which originate in the Uinta Mountains east of the study area. The ground-water system in this area consists of water in unconsolidated deposits and consolidated rock; water budgets indicate very little interaction between consolidated rock and unconsolidated deposits. Most recharge to consolidated rock occurs at higher altitudes in the mountains and discharges to streams and springs upgradient of Kamas Valley. About 38,000 acre-feet per year of water flows through the unconsolidated deposits in Kamas Valley. Most recharge is from irrigation and seepage from major streams; most discharge is to Beaver Creek in the middle part of the valley. Long-term water-level fluctuations range from about 3 to 17 feet. Seasonal fluctuations exceed 50 feet. Transmissivity varies over four orders of magnitude in both the unconsolidated deposits and consolidated rock and is typically 1,000 to 10,000 feet squared per day in unconsolidated deposits and 100 feet squared per day in consolidated rock as determined from specific capacity. Water samples collected from wells, streams, and springs had nitrate plus nitrite concentrations (as N) substantially less than 10 mg/L. Total and fecal coliform bacteria were detected in some surface-water samples and probably originate from livestock. Septic systems do not appear to be degrading water quality. A numerical ground-water flow model developed to test the conceptual understanding of the ground-water system adequately simulates water levels and flow in the unconsolidated deposits. Analyses of model fit and sensitivity were used to refine the conceptual and numerical models.

Utah↗