Geology ReportsSearch

USGS · 70143793

Presence of amphibian chytrid fungus (Batrachochytrium dendrobatidis) in rainwater suggests aerial dispersal is possible

Abstract

Abstract Global spread of the pathogenic amphibian chytrid fungus Batrachochytrium dendrobatidis (Bd) may involve dispersal mechanisms not previously explored. Weather systems accompanied by strong wind and rainfall have been known to assist the dispersal of microbes pathogenic to plants and animals, and we considered a similar phenomenon might occur with Bd. We investigated this concept by sampling rainwater from 20 precipitation events for the presence of Bd in Cusuco National Park, Honduras: a site where high Bd prevalence was previously detected in stream-associated amphibians. Quantitative PCR analysis confirmed the presence of Bd in rainwater in one (5 %) of the weather events sampled, although viability cannot be ascertained from molecular presence alone. The source of the Bd and distance that the contaminated rainwater traveled could not be determined; however, this collection site was located approximately 600 m from the nearest observed perennial river by straight-line aerial distance. Although our results suggest atmospheric Bd dispersal is uncommon and unpredictable, even occasional short-distance aerial transport could considerably expand the taxonomic diversity of amphibians vulnerable to exposure and at risk of decline, including terrestrial and arboreal species that are not associated with permanent water bodies.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Jonathan E. Kolby, Sara D. Ramirez, Lee Berger, Dale W. Griffin, Merlijn Jocque, Lee F. Skerratt. 2015-03-17. Presence of amphibian chytrid fungus (Batrachochytrium dendrobatidis) in rainwater suggests aerial dispersal is possible. https://doi.org/10.1007/s10453-015-9374-6

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Initial comparison of pollen counting methods using precipitation and ambient air samples and automated artificial intelligence to support national monitoring objectives

Given the endemic nature of pollen throughout the environment, the impact upon human health, and the need for more extensive and better measurements of pollen in the USA, a preliminary project within the National Atmospheric Deposition Program’s (NADP) National Trends Network (NTN) was developed. Pollen was measured in ambient air by several methods and in precipitation wet deposition samples at three monitoring sites in the NTN. A method for counting pollen on filters was developed and provided pollen counts for NADP atmospheric wet-deposition samples and high-volume ambient air samplers (HVAS) for comparison with co-located traditional National Allergy Bureau microscopy samples and a commercially available pollen sensor (PS) counting method during the 2021 pollen season. The goals of this project were to test the potential of available air-monitoring infrastructures to obtain improved spatial measurements of aeroallergens, compare pollen counting results from the various methods, and to determine the suitability of using wet deposition samples for pollen collection. The onset and senescence of pollen seasons for general categories of genera compared favorably for each method at each site, indicating that pollen monitoring using wet-deposition and ambient air sampling filters could provide useful information to inform scientific studies, but not likely for public health objectives. Pollen counts were log transformed for Pearson product moment correlation. Tree pollen counts were correlated at all sites for daily PS data and traditional counting data ( R = 0.69–0.84), but statistical correlations between methods for grass and weed pollen were weak (0.40 < R < 0.60) or considered not correlated ( R < 0.40). Total pollen counts in NADP precipitation samples were correlated with traditional and PS counts at only one of three sites. Pollen counts for the weekly HVAS filter samples were correlated with PS counts for trees ( R = 0.62) and with NAB counts for trees ( R = 0.68) and weeds ( R = 0.72). Correlations in the data between methods suggest that, given further methods development, a variety of techniques could be integrated to expand and enhance existing pollen monitoring networks. Improved ambient air and atmospheric deposition sampling methods specifically targeted for pollen capture and analysis could support the collection of accurate and efficient meaningful aeroallergen data from existing atmospheric monitoring networks.

Aerobiologia

Efficiency of bioaerosol samplers: A comparison study

Bioaerosols, including bacteria and fungi, are ubiquitous and have been shown to impact various organisms as well as biogeochemical cycles and human health. However, sample collection poses a challenge for aeromicrobiologists and can determine the success of a study. Establishing a standard collection procedure for bioaerosol sampling could help advance the field. We tested the efficiency (number of organisms collected and DNA yield per unit time) of three sampling devices: a membrane filtration device, a liquid impinger, and a portable electrostatic precipitator bioaerosol collector. We compared the efficiency of these three devices for both culture-dependent studies, by enumerating colony forming units (CFUs), and culture-independent studies, by extracting and quantifying total DNA. Our results show that the electrostatic precipitator collected microorganisms significantly more efficiently than the membrane filtration and liquid impingement in both types of studies over the same time interval. This is due to the high flow rate of the device. This work is important and timely because aeromicrobiology is currently restricted by long sampling times and risk of evaporation, desiccation, or freezing during sample, which increases with sampling times. Fieldwork convenience and portability of instruments are an additional challenge for sampling. Using a sampler that can overcome these technical hurdles can accelerate the advancement of the field, and the use of a lightweight, battery-powered, inexpensive, and portable bioaerosol collection device could address these limitations.

Aerobiologia

Science questions and knowledge gaps to study microbial transport and survival in Asian and African dust plumes reaching North America

The Sahara in North Africa and the Gobi and Taklamakan deserts in Asia are the primary sources of mobilized dust in the atmosphere, with regional or global airborne transport estimated at 2 to 5 billion tonnes per year. Annual Asian dust plumes take about 7 to 10 d to cross the Pacific Ocean, and often reach the northwest USA between late February and May. In contrast, the peak season for the movement of African dust storms to the southeastern USA is typically June to August, and dust plumes take about 5 to 7 d to reach Florida. Although studies have documented that a wide range of bacteria, fungi, archaea, and viruses in dust plumes reach the USA each year, little is known about temporal and spatial variability in the microbial biodiversity in transoceanic dust plumes, or the effect on the deposition environments. A scoping study (called the Transoceanic Aerobiology Biodiversity Study) was conducted to develop field-based campaigns centered on examining the abundance, diversity, survival, and impact of microorganisms in transoceanic dust plumes arriving in the continental USA from Asia and Africa. This effort identified Science Questions (SQs) and Knowledge Gaps (KGs) that are highly relevant toward an understanding of the microbial diversity, transport, survival, and dispersal in transoceanic dusts. Science Questions were defined as broad science topics in transoceanic dust plume microbiology that were underexplored by the aerobiology community. Knowledge Gaps were defined as specific project-level research questions for each SQ that represented important topics in the study of transoceanic aerobiology.

Aerobiologia