Geology ReportsSearch

USGS · 70093650

Secular trends in the geologic record and the supercontinent cycle

Abstract

Geologic secular trends are used to refine the timetable of supercontinent assembly, tenure, and breakup. The analysis rests on what is meant by the term supercontinent, which here is defined broadly as a grouping of formerly dispersed continents. To avoid the artificial pitfall of an all-or-nothing definition, quantitative measures of “supercontinentality” are presented: the number of continents, and the area of the largest continent, which both can be gleaned from global paleogeographic maps for the Phanerozoic. For the secular trends approach to be viable in the deep past when the very existence of supercontinents is debatable and reconstructions are fraught with problems, it must first be calibrated in the Phanerozoic against the well-constrained Pangea supercontinent cycle. The most informative geologic variables covering both the Phanerozoic and Precambrian are the abundances of passive margins and of detrital zircons. Both fluctuated with size of the largest continent during the Pangea supercontinent cycle and can be quantified back to the Neoarchean. The tenure of Pangea was a time represented in the rock record by few zircons and few passive margins. Thus, previously documented minima in the abundance of detrital zircons (and orogenic granites) during the Precambrian (Condie et al., 2009a, Gondwana Research 15, 228–242) now can be more confidently interpreted as marking the tenures of supercontinents. The occurrences of carbonatites, granulites, eclogites, and greenstone-belt deformation events also appear to bear the imprint of Precambrian supercontinent cyclicity. Together, these secular records are consistent with the following scenario. The Neoarchean continental assemblies of Superia and Sclavia broke up at ca. 2300 and ca. 2090 Ma, respectively. Some of their fragments collided to form Nuna by about 1750 Ma; Nuna then grew by lateral accretion of juvenile arcs during the Mesoproterozoic, and was involved in a series of collisions at ca. 1000 Ma to form Rodinia. Rodinia broke up in stages from ca. 1000 to ca. 520 Ma. Before Rodinia had completely come apart, some of its pieces had already been reassembled in a new configuration, Gondwana, which was completed by 530 Ma. Gondwana later collided with Laurentia, Baltica, and Siberia to form Pangea by about 300 Ma. Breakup of Pangea began at about 180 Ma (Early Jurassic) and continues today. In the suggested scenario, no supercontinent cycle in Earth history corresponded to the ideal, in which all the continents were gathered together, then broke apart, then reassembled in a new configuration. Nuna and Gondwana ended their tenures not by breakup but by collision and name change; Rodinia's assembly overlapped in time with its disassembly; and Pangea spalled Tethyan microcontinents throughout much of its tenure. Many other secular trends show a weak or uneven imprint of the supercontinent cycle, no imprint at all. Instead, these secular trends together reveal aspects of the shifting background against which the supercontinents came and went, making each cycle unique. Global heat production declined; plate tectonics sped up through the Proterozoic and slowed down through the Phanerozoic; the atmosphere and oceans became oxidized; life emerged as a major geochemical agent; some rock types went extinct or nearly so (BIF, massif-type anorthosite, komatiite); and other rock types came into existence or became common (blueschists, bioclastic limestone, coal).

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Dwight Bradley. 2011. Secular trends in the geologic record and the supercontinent cycle. https://doi.org/10.1016/j.earscirev.2011.05.003

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Guidelines for producing integrated 210Pb and 14C age-models

Accurate reconstructions of past environmental changes are crucial in paleoecological research and require reliable chronologies of sedimentary archives. Establishing robust age-models and obtaining the most appropriate proxies for analysis is a complex scientific endeavor, requiring extensive resources and collaboration among specialists, including radiochronologists. Radiometric dating methods, such as 210 Pb and radiocarbon ( 14 C), are frequently employed to establish chronologies in aquatic sedimentary deposits and peat bogs. In this study, we review key aspects of sampling, analysis, and the principles underlying 210 Pb and 14 C age-models, focusing on methods for developing robust joint chronologies for paleoenvironmental research. Drawing largely from the authors' experiences and group discussions during and after a scientific workshop in 2022, we discuss important considerations for site selection, sampling strategies, and radiometric dating to construct integrated 210 Pb and 14 C age-models. Using expert consensus, this group – called Paleostats – aims to provide a set of best practices for other geochronologists with this methods paper. Among our conclusions, we emphasize the importance of accounting for site-specific factors such as prior information on sedimentation rates to establish appropriate sampling and analytical strategies. The use of appropriate coring devices can minimize disturbance to sediments and ensure the core surface remains intact and preserved until sectioning. Where excess 210 Pb is expected, sectioning at intervals of ≤1 cm provides an adequate sampling resolution for 210 Pb dating. Exceptions are possible, allowing for ~2–3 cm sections in areas with confirmed high sedimentation rates (e.g., > 1 cm yr −1 ). Recovering deeper core sections for 14 C dating with sufficient overlap allows for accounting errors in depth estimates made in the field. Special attention is advised during time intervals where validation proxies, such as the human-made radionuclides 137 Cs or post-bomb 14 C, are expected, and to determine the depth of secular equilibrium between 210 Pb and 226 Ra. Radiocarbon analyses are commonly performed by accelerator mass spectrometry, and age models are constructed mainly using Bayesian statistics with Markov Chain Monte Carlo techniques (e.g., Bacon ). A Bayesian approach ( Plum ) is now available for producing 210 Pb age-models, which infers the 210 Pb ex flux, eliminates the need for selecting an equilibrium depth, and allows dating cores with incomplete 210 Pb ex inventory. Plum offers improved chronologies by integrating raw 210 Pb and 14 C data, and these age-models can be enriched with other dating methodologies, such as identifying tephras and other well-recorded historical events. Harmonized reporting would contribute to making radiometric age-models reproducible, which would benefit from an international effort. Using 210 Pb and 14 C to produce integrated age-models may yield better insights into the interplay between natural and recent anthropogenic forcings on ecosystems. This can enhance our understanding of environmental processes and their impacts on climate change, ultimately supporting science-based assessments and decisions.

Earth-Science Reviews

Understanding the resource potential of natural hydrogen on Earth: Scientific gaps, uncertainties and recommendations

A comprehensive scientific research roadmap is essential to bridge knowledge gaps and deepen the understanding of key geological, geochemical, and geophysical aspects of natural hydrogen (H 2 ) as a potential new energy resource. This paper reviews major scientific uncertainties on natural H 2 , suggesting research priorities, as a guide for defining exploration strategies, techniques, and data interpretation. The uncertainties concern all phases of the natural H 2 cycle, from generation (source rocks) through migration (advection and diffusion) and accumulation (reservoir and cap rocks) to the application and interpretation of subsurface and surface geochemical and geophysical exploration techniques. Understanding H 2 sources and generation rates (the amount of H 2 generated by a given volume of rock over time) is crucial for determining whether a geological H 2 system operates as a short-term dynamic system with rapid H 2 production and release, or as a conventional gas system with long-term accumulations, analogous to petroleum reservoirs. Preliminary estimates for serpentinisation, radiolysis, and organic matter degradation suggest that H 2 generation is not inherently fast, especially for non-hydrothermal continental systems (crystalline basement of shields, ophiolites, peridotite massifs, sedimentary basins), and long-term accumulations, like those of fossil natural gas systems, represent the most likely scenario. The mechanisms of H 2 migration through geological formations require application of fundamental principles of fluid-flow physics, distinguishing advection and diffusion, as well as their forms (from gas-phase, bubble flows to aqueous solutions). Additional studies of H 2 accumulation and retention in subsurface reservoirs could improve understanding of mechanisms of H 2 migration by focusing on the rock fluid-bearing properties and the factors affecting H 2 preservation, such as the presence of cap rocks impermeable to H 2 , pressure conditions, residence times, and microbial or abiotic consumption. Advanced techniques, including reservoir modelling, flow simulations, 3D imaging (micro-CT) of H 2 -bearing rocks, and extraction and analysis of gas occluded in rocks, can provide insights into the stability and potential recoverability of H 2 accumulations. The interpretation of surface exploration techniques, including gas geochemistry, geophysics, and remote sensing, long employed in mineral and energy resource exploration, is now being adapted for natural H 2 studies, but challenges remain in the data interpretation. Distinguishing H 2 seepage due to geological degassing from H 2 produced near the surface by modern microbial processes or artificial sources, such as hammering or drilling for soil-gas sampling, drilling into aquifers, and corrosion in boreholes, is an essential step in exploration. The simple detection of H 2 in soils, even in morphological structures like sub-circular depressions or “fairy circles”, cannot be cursorily interpreted as a signal of natural H 2 seepage from a deep source. A holistic geochemical approach, including isotopic analyses of gases associated with H 2 , is recommended to distinguish among the variety of possible H 2 origins. Observations of H 2 in wells should be interrogated to rule out possible artifacts such as corrosion and drill bit metamorphism. The integration of multiple geophysical methods, including seismic, gravimetric, magnetic, and electro-magnetic surveys, is recommended to mitigate interpretation ambiguities regarding the structure of a subsurface H 2 system (source and reservoir rocks, including fluid and gas storage), due to the non-uniqueness of rock-specific physical properties.

Earth-Science Reviews

Estimating paleotemperature using stable isotopes of soil-formed phyllosilicates from paleosols: A review

Fossilized soils, or paleosols, contain soil-formed phyllosilicates whose stable isotopic compositions may be used to calculate paleotemperature and thus reconstruct ancient terrestrial environments. Though paleosols are common in the geologic record, the use of phyllosilicates as paleotemperature proxies is limited in the literature owing to difficulties with selecting optimal paleosols, isolation from non-clay minerals and organic materials, mixtures of phyllosilicates in natural samples, wide variations of chemical compositions for phyllosilicates, and limited to undefined equilibrium fractionation factors between phyllosilicates-water. Here, we address these challenges by examining and comparing methods used for sample selection, mineral isolation, pretreatments, mineral identification, conventional and developing methods for oxygen and hydrogen isotopic analyses, and determination of phyllosilicate-water equilibrium fractionation factors, concluding with recommendations for best approaches for paleotemperature estimation. Additionally, we discuss how to identify and avoid detrital phyllosilicates, the impacts of diagenesis, comparison of stable isotope and non-isotope paleosol paleotemperature proxies, and challenges and opportunities for broadly using paleosols as paleoclimate archives. With ongoing efforts to refine this multi-faceted paleotemperature approach, the stable isotope geochemistry of soil-formed phyllosilicates continues to be an invaluable proxy system, enhancing our understanding of terrestrial paleoenvironments and paleoclimate.

Kansas