Geology Reports⌕ Search

USGS · 70045755

Glass wool filters for concentrating waterborne viruses and agricultural zoonotic pathogens

Abstract

The key first step in evaluating pathogen levels in suspected contaminated water is concentration. Concentration methods tend to be specific for a particular pathogen group, for example US Environmental Protection Agency Method 1623 for Giardia and Cryptosporidium1, which means multiple methods are required if the sampling program is targeting more than one pathogen group. Another drawback of current methods is the equipment can be complicated and expensive, for example the VIRADEL method with the 1MDS cartridge filter for concentrating viruses2. In this article we describe how to construct glass wool filters for concentrating waterborne pathogens. After filter elution, the concentrate is amenable to a second concentration step, such as centrifugation, followed by pathogen detection and enumeration by cultural or molecular methods. The filters have several advantages. Construction is easy and the filters can be built to any size for meeting specific sampling requirements. The filter parts are inexpensive, making it possible to collect a large number of samples without severely impacting a project budget. Large sample volumes (100s to 1,000s L) can be concentrated depending on the rate of clogging from sample turbidity. The filters are highly portable and with minimal equipment, such as a pump and flow meter, they can be implemented in the field for sampling finished drinking water, surface water, groundwater, and agricultural runoff. Lastly, glass wool filtration is effective for concentrating a variety of pathogen types so only one method is necessary. Here we report on filter effectiveness in concentrating waterborne human enterovirus, Salmonella enterica, Cryptosporidium parvum, and avian influenza virus.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Hana T. Millen, Jordan C. Gonnering, Ryan K. Berg, Susan K. Spencer, William E. Jokela, John M. Pearce, Jackson S. Borchardt, Mark A. Borchardt. 2012-03-03. Glass wool filters for concentrating waterborne viruses and agricultural zoonotic pathogens. https://doi.org/10.3791/3930

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

In situ soil moisture sensors in undisturbed soils

Soil moisture directly affects operational hydrology, food security, ecosystem services, and the climate system. However, the adoption of soil moisture data has been slow due to inconsistent data collection, poor standardization, and typically short record duration. Soil moisture, or quantitatively volumetric soil water content (SWC), is measured using buried, in situ sensors that infer SWC from an electromagnetic response. This signal can vary considerably with local site conditions such as clay content and mineralogy, soil salinity or bulk electrical conductivity, and soil temperature; each of these can have varying impacts depending on the sensor technology., Furthermore, poor soil contact and sensor degradation can affect the quality of these readings over time. Unlike more traditional environmental sensors, there are no accepted standards, maintenance practices, or quality controls for SWC data. As such, SWC is a challenging measurement for many environmental monitoring networks to implement. Here, we attempt to establish a community-based standard of practice for in situ SWC sensors so that future research and applications have consistent guidance on site selection, sensor installation, data interpretation, and long-term maintenance of monitoring stations., The videography focuses on a multi-agency consensus of best-practices and recommendations for the installation of in situ SWC sensors. This paper presents an overview of this protocol along with the various steps essential for high-quality and long-term SWC data collection. This protocol will be of use to scientists and engineers hoping to deploy a single station or an entire network.

Journal of Visualized Experiments↗

Using enclosed Y-mazes to assess chemosensory behavior in reptiles

Reptiles utilize a variety of environmental cues to inform and drive animal behavior such as chemical scent trails produced by food or conspecifics. Decrypting the scent-trailing behavior of vertebrates, particularly invasive species, enables the discovery of cues that induce exploratory behavior and can aid in the development of valuable basic and applied biological tools. However, pinpointing behaviors dominantly driven by chemical cues versus other competing environmental cues can be challenging. Y-mazes are common tools used in animal behavior research that allow quantification of vertebrate chemosensory behavior across a range of taxa. By reducing external stimuli, Y-mazes remove confounding factors and present focal animals with a binary choice. In our Y-maze studies, a scenting animal is restricted to one arm of the maze to leave a scent trail and is removed once scent-laying parameters have been met. Then, depending on the trial type, either the focal animal is allowed into the maze, or a competing scent trail is created. The result is a record of the focal animal's choice and behavior while discriminating between the chemical cues presented. Here, two Y-maze apparatuses tailored to different invasive reptile species: Argentine black and white tegu lizards (Salvator merianae) and Burmese pythons (Python bivittatus) are described, outlining the operation and cleaning of these Y-mazes. Further, the variety of data produced, experimental drawbacks and solutions, and suggested data analysis frameworks have been summarized.

Journal of Visualized Experiments↗

Manufacturing simple and inexpensive soil surface temperature and gravimetric water content sensors

Quantifying temperature and moisture at the soil surface is essential for understanding how soil surface biota respond to changes in the environment. However, at the soil surface these variables are highly dynamic and standard sensors do not explicitly measure temperature or moisture in the upper few millimeters of the soil profile. This paper describes methods for manufacturing simple, inexpensive sensors that simultaneously measure the temperature and moisture of the upper 5 mm of the soil surface. In addition to sensor construction, steps for quality control, as well as for calibration for various substrates, are explained. The sensors incorporate a Type E thermocouple to measure temperature and assess soil moisture by measuring the resistance between two gold-plated metal probes at the end of the sensor at a depth of 5 mm. The methods presented here can be altered to customize probes for different depths or substrates. These sensors have been effective in a variety of environments and have endured months of heavy rains in tropical forests as well as intense solar radiation in deserts of the southwestern U.S. Results demonstrate the effectiveness of these sensors for evaluating warming, drying, and freezing of the soil surface in a global change experiment.

Journal of Visualized Experiments↗