Lysimetric Evaluation of Simplified Surface Energy Balance Approach in the Texas High Plains

Gabriel B. Senay; P.H. Gowda; T.A. Howell; T.H. Marek

Home/Archive/USGS

USGS · 70043493

Lysimetric Evaluation of Simplified Surface Energy Balance Approach in the Texas High Plains

Gabriel B. Senay·P.H. Gowda·T.A. Howell·T.H. Marek

View original source ↗Read source document ↗Export metadata ↓

Abstract

Numerous energy balance (EB) algorithms have been developed to make use of remote sensing data to estimate evapotranspiration (ET) regionally. However, most EB models are complex to use and efforts are being made to simplify procedures mainly through the scaling of reference ET. The Simplified Surface Energy Balance (SSEB) is one such method. This approach has never been evaluated using measured ET data. In this study, the SSEB approach was applied to fourteen Landsat TM images covering a major portion of the Southern High Plains that were acquired during 2006 and 2007 cropping seasons. Performance of the SSEB was evaluated by comparing estimated ET with measured daily ET from four large monolithic lysimeters at the USDA-ARS Conservation and Production Research Laboratory, Bushland, Texas. Statistical evaluation of results indicated that the SSEB accounted for 84% of the variability in the measured ET values with a slope and intercept of 0.75 and 1.1 mm d-1, respectively. Considering the minimal amount of ancillary data required and excellent performance in predicting daily ET, the SSEB approach is a promising tool for mapping ET in the semiarid Texas High Plains and in other parts of the world with similar hydro-climatic conditions.

Explore related subjects

Applied Engineering in Agriculture Article

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Gabriel B. Senay, P.H. Gowda, T.A. Howell, T.H. Marek. 2009. Lysimetric Evaluation of Simplified Surface Energy Balance Approach in the Texas High Plains. https://pubs.usgs.gov/publication/70043493

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2019

Geospatial scaling of runoff and erosion modeling in the Chihuahuan Desert

Large-scale assessments of rangeland runoff and erosion require methods to extend plot-scale parameterizations to large areas. In this study, Rangeland Hydrology and Erosion Model (RHEM) parameters were developed from plot-scale foliar and ground-cover transect data for an arid, grass-shrub rangeland in southern New Mexico, and a method was assessed to upscale transect-plot parameters to a large landscape. The transect-plot data compared favorably to corresponding cell data generated from publicly available geospatial data for total foliar cover but less favorably for litter cover and poorly for rock cover. The RHEM effective hydraulic conductivity (K e ) parameter was comparable between transect-plot and geospatial-cell methods, but the splash and sheet erosion factor (K ss ) had poor agreement between the two methods. Simulated runoff and erosion reflected differences in transect-plot and geospatial-cell-based RHEM parameterizations, with low error and very good agreement for runoff but high error and poor agreement for soil loss. These results demonstrate that K e parameters developed using geospatial data calibrated to plot data can be extrapolated to large spatial areas and provide reasonable simulation of runoff using RHEM. However, these same geospatial methods do not provide reasonable estimation of K ss or simulation of soil loss. Poor representation of litter and rock cover variables, which are highly spatially heterogeneous at the plot scale, was inadequate to accurately represent K ss or soil loss using RHEM. High resolution ground cover data, such as from unmanned aerial systems, may improve parameterization of K ss , and, ultimately, arid rangeland soil erosion simulation.

New Mexico↗

USGS2018

Satellite psychrometric formulation of the operational simplified surface energy balance (SSEBop) model for quantifying and mapping evapotranspiration

Remote sensing-based evapotranspiration (ET) can be derived using various methods, from soil moisture accounting to vegetation-index based approaches to simple and complex surface energy balance techniques. Due to the complexity of fully representing and parameterizing ET sub-processes, different models tend to diverge in their estimations. However, most models appear to provide reasonable estimations that can meet user requirements for seasonal water use estimation and drought monitoring. One such model is the Operational Simplified Surface Energy Balance (SSEBop). This study presents a formulation of the SSEBop model using the psychrometric principle for vapor pressure/relative humidity measurements where the “dry-bulb” and “wet-bulb” equivalent readings can be obtained from satellite-based land surface temperature estimates. The difference in temperature between the dry (desired location) and wet limit (reference value) is directly correlated to the soil-vegetation composite moisture status (surface humidity) and thus producing a fractional value (0-1) to scale the reference ET. The reference ET is independently calculated using available weather data through the standardized Penman-Monteith equation. Satellite Psychrometric Approach (SPA) explains the SSEBop model more effectively than the energy balance principle because SSEBop does not solve all terms of the surface energy balance such as sensible and ground-heat fluxes. The SPA explanation demonstrates the psychrometric constant for the air can be readily adapted to a comparable constant for the surface, thus allowing the creation of a “surface” psychrometric constant that is unique to a location and day-of-year. This new surface psychrometric constant simplifies the calculation and explanation of satellite-based ET for several applications in agriculture and hydrology. The SPA formulation of SSEBop was found to be an enhancement of the ET equation formulated in 1977 by pioneering researchers. With only two key parameters, improved model results can be obtained using a one-time calibration for any bias correction. The model can be set up quickly for routine monitoring and assessment of ET at landscape scales and beyond.

Arizona↗

USGS2011

Agricultural herbicide transport in a first-order intermittent stream, Nebraska, USA

The behavior of herbicides in surface waters is a function of many variables, including scale of the watershed, physical and chemical properties of the herbicide, physical and chemical properties of the soil, rainfall intensity, and time of year. In this study, the transport of 6 herbicides and 12 herbicide degradates was examined during the 2004 growing season in an intermediate-scale agricultural watershed (146 ha) that is drained by a first-order intermittent stream, and the mass load for each herbicide in the stream was estimated. The herbicide load during the first week of storm events after application ranged from 17% of annual load for trifluralin to 84% of annual load for acetochlor. The maximum weekly herbicide load in the stream was generally within the first 3 weeks after application for those compounds that were applied within the watershed during 2004, and later for herbicides not applied within the watershed during 2004 but still detected in the stream. The apparent dominant mode of herbicide transport in the stream-determined by analysis amongst herbicide and conservative ion concentrations at different points in the hydrograph and in base flow samples-was either overland runoff or shallow subsurface flow, depending on the elapsed time after application and type of herbicide. The load as a percentage of use (LAPU) for the parent compounds in this study was similar to literature values for those compounds applied by the farmer within the watershed, but smaller for those herbicides that had rainfall as their only source within the watershed.

Nebraska↗