Geology ReportsSearch

USGS · 70041657

Liquefaction probability curves for surficial geologic deposits

Abstract

Liquefaction probability curves that predict the probability of surface manifestations of earthquake-induced liquefaction are developed for 14 different types of surficial geologic units. The units consist of alluvial fan, beach ridge, river delta topset and foreset beds, eolian dune, point bar, flood basin, natural river and alluvial fan levees, abandoned river channel, deep-water lake, lagoonal, sandy artificial fill, and valley train deposits. Probability is conditioned on earthquake magnitude and peak ground acceleration. Curves are developed for water table depths of 1.5 and 5.0 m. Probabilities are derived from complementary cumulative frequency distributions of the liquefaction potential index (LPI) that were computed from 927 cone penetration tests. For natural deposits with a water table at 1.5 m and subjected to a M7.5 earthquake with peak ground acceleration (PGA) = 0.25 g , probabilities range from <0.03 for alluvial fan and lacustrine deposits to >0.5 for beach ridge, point bar, and deltaic deposits. The curves also were used to assign ranges of liquefaction probabilities to the susceptibility categories proposed previously for different geologic deposits. For the earthquake described here, probabilities for susceptibility categories have ranges of 0–0.08 for low, 0.09–0.30 for moderate, 0.31–0.62 for high, and 0.63–1.00 for very high. Retrospective predictions of liquefaction during historical earthquakes based on the curves compare favorably to observations.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 25.08° to 49.38905° latitude; -124.68721° to -66.96466° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Thomas L. Holzer, Thomas E. Noce, Michael J. Bennett. 2011-02-04. Liquefaction probability curves for surficial geologic deposits. https://doi.org/10.2113/gseegeosci.17.1.1

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Developing a probabilistic tsunami hazard assessment framework for Pacific sources: USGS Powell Center meeting summary

Multi-organizational principal investigators formed a U.S. Geological Survey (USGS) Powell Center Working Group (WG), Tsunami Source Standardization for Hazards Mitigation in the United States, to develop a comprehensive series of sources capable of generating tsunamis that could impact U.S. state and territory coastal areas using probabilistic tsunami hazard analysis (PTHA). PTHA results are commonly used to provide consistent tsunami hazard information for use in engineering and risk assessment and, to a lesser extent, hazard response planning. Following an initial weeklong planning meeting in April 2018, designed to establish the WG’s scope, a series of weeklong meetings devoted to aspects of tsunami hazards placed emphasis on assessment of various tsunami sources, including subduction zones in Alaska, the Atlantic and Caribbean, Cascadia, and the Pacific Basin, as well as landslides in Alaska, the Atlantic, and the Caribbean. The final meeting in the series discussed tsunami sources from crustal faults. These meetings, each with a regional geographic focus, were designed to incorporate reviews and feedback from subject matter experts (SMEs) in academia, private industry, and federal, state, and local governmental organizations. Incorporating consensus from SMEs is important because the results derived from the tsunami source models will be used to inform the public about potential hazards from tsunamis related to safety concerns. This paper describes the USGS Powell Center meeting in March 2023, devoted specifically to developing a PTHA for tsunami sources in the Pacific Ocean Basin other than the Alaska–Aleutian and Cascadia subduction zones that were addressed during previous WG meetings.

Environmental & Engineering Geoscience

Hydrological and geophysical investigation of streamflow losses and restoration strategies in an abandoned mine lands setting

Longitudinal discharge and water-quality campaigns (seepage runs) were combined with surface-geophysical surveys, hyporheic-temperature profiling, and watershed-scale hydrological monitoring to evaluate the locations, magnitude, and impact of streamwater losses from the West Creek subbasin of the West West Branch Schuylkill River into the underground Oak Hill Mine complex that extends beneath the watershed divide. Abandoned mine drainage (AMD), containing iron and other contaminants, from the Oak Hill Boreholes to the West Branch Schuylkill River was sustained during low-flow conditions and correlated to streamflow lost through the West Creek streambed. During high-flow conditions, streamflow was transmitted throughout West Creek; however, during low-flow conditions, all streamflow from the perennial headwaters was lost within the 300-to-600-m "upper reach" where an 1889 mine map indicated steeply dipping coalbeds underlie the channel. During low-flow conditions, the channel within the "intermediate reach" 700-to-1650-m downstream gained groundwater seepage with higher pH and specific conductance than upstream; however, all streamflow 1650-to-2050-m downstream was lost to underlying mines. Electrical resistivity and electromagnetic conductivity surveys indicated conductive zones beneath the upper reach, where flow loss occurred, and through the intermediate reach, where gains and losses occurred. Temperature probes at 0.06-to-0.10-m depth within the hyporheic zone of the intermediate reach indicated potential downward fluxes as high as 2.1x10-5 m/s. Cumulative streamflow lost from West Creek during seepage runs averaged 53.4 L/s, which equates to 19.3 percent of the daily average discharge of AMD from the Oak Hill Boreholes and a downward flux of 1.70x10-5 m/s across the 2.1-km-by-1.5-m West Creek stream-channel area.

Pennsylvania

The road to Yucca Mountain—Evolution of nuclear waste disposal in the United States

The generation of electricity by nuclear power and the manufacturing of atomic weapons have created a large amount of spent nuclear fuel and high-level radioactive waste. There is a world-wide consensus that the best way to protect mankind and the environment is to dispose of this waste in a deep geologic repository. Initial efforts focused on salt as the best medium for disposal, but the heat generated by the radioactive waste led many earth scientists to examine other rock types. In 1976, the director of the U.S. Geological Survey (USGS) wrote to the U.S. Energy Research and Development Administration (ERDA), predecessor agency of the U.S. Department of Energy (DOE), suggesting that there were several favorable environments at the Nevada Test Site (NTS), and that the USGS already had extensive background information on the NTS. Later, in a series of communications and one publication, the USGS espoused the favorability of the thick unsaturated zone. After the passage of the Nuclear Waste Policy Act (1982), the DOE compiled a list of nine favorable sites and settled on three to be characterized. In 1987, as the costs of characterizing three sites ballooned, Congress amended the Nuclear Waste Policy Act directing the DOE to focus only on Yucca Mountain in Nevada, with the proviso that if anything unfavorable was discovered, work would stop immediately. The U.S. DOE, the U.S. DOE national laboratories, and the USGS developed more than 100 detailed plans to study various earth-science aspects of Yucca Mountain and the surrounding area, as well as materials studies and engineering projects needed for a mined geologic repository. The work, which cost more than 10 billion dollars and required hundreds of man-years of work, culminated in a license application submitted to the U.S. Nuclear Regulatory Commission (NRC) in 2008.

Environmental & Engineering Geoscience