Geology ReportsSearch

USGS · 70040504

A basin-scale approach for assessing water resources in a semiarid environment: San Diego region, California and Mexico

Abstract

Many basins throughout the world have sparse hydrologic and geologic data, but have increasing demands for water and a commensurate need for integrated understanding of surface and groundwater resources. This paper demonstrates a methodology for using a distributed parameter water-balance model, gaged surface-water flow, and a reconnaissance-level groundwater flow model to develop a first-order water balance. Flow amounts are rounded to the nearest 5 million cubic meters per year. The San Diego River basin is 1 of 5 major drainage basins that drain to the San Diego coastal plain, the source of public water supply for the San Diego area. The distributed parameter water-balance model (Basin Characterization Model) was run at a monthly timestep for 1940–2009 to determine a median annual total water inflow of 120 million cubic meters per year for the San Diego region. The model was also run specifically for the San Diego River basin for 1982–2009 to provide constraints to model calibration and to evaluate the proportion of inflow that becomes groundwater discharge, resulting in a median annual total water inflow of 50 million cubic meters per year. On the basis of flow records for the San Diego River at Fashion Valley (US Geological Survey gaging station 11023000), when corrected for upper basin reservoir storage and imported water, the total is 30 million cubic meters per year. The difference between these two flow quantities defines the annual groundwater outflow from the San Diego River basin at 20 million cubic meters per year. These three flow components constitute a first-order water budget estimate for the San Diego River basin. The ratio of surface-water outflow and groundwater outflow to total water inflow are 0.6 and 0.4, respectively. Using total water inflow determined using the Basin Characterization Model for the entire San Diego region and the 0.4 partitioning factor, groundwater outflow from the San Diego region, through the coastal plain aquifer to the Pacific Ocean, is calculated to be approximately 50 million cubic meters per year. The area-scale assessment of water resources highlights several hydrologic features of the San Diego region. Groundwater recharge is episodic; the Basin Characterization Model output shows that 90 percent of simulated recharge occurred during 3 percent of the 1982–2009 period. The groundwater aquifer may also be quite permeable. A reconnaissance-level groundwater flow model for the San Diego River basin was used to check the water budget estimates, and the basic interaction of the surface-water and groundwater system, and the flow values, were found to be reasonable. Horizontal hydraulic conductivity values of the volcanic and metavolcanic bedrock in San Diego region range from 1 to 10 m per day. Overall, results establish an initial hydrologic assessment formulated on the basis of sparse hydrologic data. The described flow variability, extrapolation, and unique characteristics represent a realistic view of current (2012) hydrologic understanding for the San Diego region.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 31.41460027631321° to 33.33970700424026° latitude; -117.3065185546875° to -115.68603515624999° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

L. E. Flint, A. L. Flint, Bernard J. Stolp, W.R. Danskin. 2012-10-26. A basin-scale approach for assessing water resources in a semiarid environment: San Diego region, California and Mexico. https://doi.org/10.5194/hess-16-3817-2012

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Technical note: A low-cost approach to monitoring relative streamflow dynamics in small headwater streams using time lapse imagery and a deep learning model

Despite their ubiquity and importance as freshwater habitat, small headwater streams are under-monitored by existing stream gage networks. To address this gap, we describe a low-cost, non-contact, and low-effort method that enables organizations to monitor relative streamflow dynamics in small headwater streams. The method uses a camera to capture repeat images of the stream from a fixed position. A person then annotates pairs of images, in each case indicating which image has more apparent streamflow or indicating equal flow if no difference is discernible. A deep learning modeling framework called streamflow rank estimation (SRE) is then trained on the annotated image pairs and applied to rank all images from highest to lowest apparent streamflow. From this result a relative hydrograph can be derived. We found that our modeled relative hydrograph dynamics matched the observed hydrograph dynamics well for 11 cameras at 8 streamflow sites in western Massachusetts. Higher performance was observed during the annotation period (median Kendall's Tau rank correlation of 0.75, with a range of 0.6–0.83) than after it (median Kendall's Tau of 0.59, with range 0.34–0.74). We found that annotation performance was generally consistent across the 11 camera sites and 2 individual annotators and was positively correlated with streamflow variability at a site. A scaling simulation determined that model performance improvements were limited after 1000 annotation pairs. Our model's estimates of relative flow, while not equivalent to absolute flow, may still be useful for many applications, such as ecological modeling and calculating event-based hydrological statistics (e.g., the number of out-of-bank floods). We anticipate that this method will be a valuable tool to extend existing stream monitoring networks and provide new insights on dynamic headwater systems.

Massachusetts

Interrogating process deficiencies in large-scale hydrologic models with interpretable machine learning

Large-scale hydrologic models are increasingly being developed for operational use in the forecasting and planning of water resources. However, the predictive strength of such models depends on how well they resolve various functions of catchment hydrology, which are influenced by gradients in climate, topography, soils, and land use. Most assessments of hydrologic model uncertainty have been limited to traditional statistical methods. Here, we present a proof-of-concept approach that uses interpretable machine learning techniques to provide post hoc assessment of model sensitivity and process deficiency in hydrologic models. We train a random forest model to predict the Kling–Gupta efficiency (KGE) of National Water Model (NWM) and National Hydrologic Model (NHM) streamflow predictions for 4383 stream gauges in the conterminous United States. Thereafter, we explain the local and global controls that 48 catchment attributes exert on KGE prediction using interpretable Shapley values. Overall, we find that soil water content is the most impactful feature controlling successful model performance, suggesting that soil water storage is difficult for hydrologic models to resolve, particularly for arid locations. We identify nonlinear thresholds beyond which predictive performance decreases for NWM and NHM. For example, soil water content less than 210 mm, precipitation less than 900 mm yr −1 , road density greater than 5 km km −2 , and lake area percent greater than 10 % contributed to lower KGE values. These results suggest that improvements in how these influential processes are represented could result in the largest increases in NWM and NHM predictive performance. This study demonstrates the utility of interrogating process-based models using data-driven techniques, which has broad applicability and potential for improving the next generation of large-scale hydrologic models.

conterminous United States

Pluvial and potential compound flooding in a coupled coastal modeling framework: New York City during post-tropical Cyclone Ida (2021)

Many coastal urban areas are prone to extreme pluvial flooding due to limitations in stormwater system capacity, with the additional potential for flooding compounded by storm surge, tides, and waves. Understanding and simulating these processes can improve prediction and flood risk management. Here, we adapt the Coupled Ocean–Atmosphere–Wave–Sediment Transport modeling framework (COAWST) to simulate pluvial flooding from post-tropical Cyclone Ida (2021) in the Jamaica Bay watershed of New York City (NYC). We modify the model to capture the volumetric effects of rainfall and parameterize soil infiltration and a stormwater conveyance system as the drainage rate. We generate a spatially continuous flood map of Ida with a root-mean-square error (RMSE) of 20 cm when compared to high-water marks, useful for understanding Ida's impacts and subsequent mitigation planning. Results show that over 23 km 2 and 4621 buildings were flooded deeper than 0.3 m during Ida. Sensitivity analyses are used to study the broader risk from events like Ida (pluvial flooding) as well as potential compound (pluvial–coastal) flooding. Spatial shifting of the storm track within a typical 12 h forecast uncertainty reveals a worst-case scenario that increases this flooded area to 62 km 2 (5907 buildings). Shifting Ida's rainfall to coincide with high tide increases this flooded area by 1 km 2 , a relatively small change due to the lack of significant storm surge. The application of COAWST to this storm event addresses a broader goal of developing the capability to model compound pluvial–coastal flooding by simultaneously representing coastal storm processes such as rain, tide, waves, erosion, and atmosphere–wave–ocean interactions. The sensitivity analysis results underscore the need for detailed flood risk assessments, showing that Ida, already NYC's worst rain event, could have been even more devastating with slight shifts in the storm track.

New York