Magnetic properties in an ash flow tuff with continuous grain size variation: a natural reference for magnetic particle granulometry

J.L. Till; M.J. Jackson; J. G. Rosenbaum; P. Solheid

doi:10.1029/2011gc003648

Home/Archive/USGS

USGS · 70036267

Magnetic properties in an ash flow tuff with continuous grain size variation: a natural reference for magnetic particle granulometry

J.L. Till·M.J. Jackson·J. G. Rosenbaum·P. Solheid

View original source ↗Export metadata ↓

Abstract

The Tiva Canyon Tuff contains dispersed nanoscale Fe-Ti-oxide grains with a narrow magnetic grain size distribution, making it an ideal material in which to identify and study grain-size-sensitive magnetic behavior in rocks. A detailed magnetic characterization was performed on samples from the basal 5 m of the tuff. The magnetic materials in this basal section consist primarily of (low-impurity) magnetite in the form of elongated submicron grains exsolved from volcanic glass. Magnetic properties studied include bulk magnetic susceptibility, frequency-dependent and temperature-dependent magnetic susceptibility, anhysteretic remanence acquisition, and hysteresis properties. The combined data constitute a distinct magnetic signature at each stratigraphic level in the section corresponding to different grain size distributions. The inferred magnetic domain state changes progressively upward from superparamagnetic grains near the base to particles with pseudo-single-domain or metastable single-domain characteristics near the top of the sampled section. Direct observations of magnetic grain size confirm that distinct transitions in room temperature magnetic susceptibility and remanence probably denote the limits of stable single-domain behavior in the section. These results provide a unique example of grain-size-dependent magnetic properties in noninteracting particle assemblages over three decades of grain size, including close approximations of ideal Stoner-Wohlfarth assemblages, and may be considered a useful reference for future rock magnetic studies involving grain-size-sensitive properties.

Explore related subjects

Geochemistry, Geophysics, Geosystems Article

Source-reported bounding extent: 35° to 42° latitude; -120° to -114° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

J.L. Till, M.J. Jackson, J. G. Rosenbaum, P. Solheid. 2011-07-02. Magnetic properties in an ash flow tuff with continuous grain size variation: a natural reference for magnetic particle granulometry. https://doi.org/10.1029/2011gc003648

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

Erupted volume during the 2014–2023 Semisopochnoi unrest and eruption constrained by multi-platform InSAR and volcanic gas observations

Volcano deformation data provide important constraints on magma dynamics during volcanic unrest and eruptions. From these observations, we can estimate subsurface pressure changes and relate them to volume change in the reservoir. However, because magma and rock are compressible, this volume change cannot be directly equated with eruptive volume. When we combine geodetic analyses with gas observations, petrologic constraints, volatile solubility modeling, and magma compressibility equations, however, we can estimate realistic lower and upper bounds of eruptive volume. Leveraging multi‐platform InSAR time series and satellite SO 2 data, we apply these methods to the 2014–2023 unrest and eruption of Semisopochnoi, Alaska. We find that this phreatomagmatic eruption sequence was fed by a spherical magma source at 6.5–7.5 km depth bsl, centered beneath the caldera, ∼5 km offset to the east from the vent. Volatile solubility modeling indicates that ∼50% of the initial dissolved CO 2 has exsolved at depths consistent with the geodetic source depth, increasing the magma compressibility. Combining geodetic model constraints with SO 2 observations, petrologic constraints, solubility models, and magma compressibility findings yields 12–32 Mm 3 as the most‐likely juvenile, dense‐rock equivalent eruptive volume, with a best estimate of 20 Mm 3 . Stress change modeling suggests that the local stress field encouraged conduit formation west of the pre‐eruptive inflation center, and that the 2014 M7.9 Rat Island earthquake, ∼65 km to the west of Semisopochnoi, reduced the compressive stress underneath the volcano, supporting prolonged eruptive activity.

Alaska↗

USGS2026

Pre-eruptive volatiles and magma storage depth for the 2018 eruption at Mount Veniaminof, Alaska

Mount Veniaminof is a frequently active, open-system arc volcano on the Alaska Peninsula, part of the Alaska-Aleutian arc. Mount Veniaminof's September–December 2018 eruption began with small lava flows and culminated in a larger explosive event in November that produced a 450 km long continuous ash plume—one of the volcano's most significant ash-producing events in recently observed eruptions. A temporally constrained tephra record was sampled after the eruption. We present volatile element concentrations (H, C, S, Cl, F) from a total of 65 olivine-hosted melt inclusions (MIs) across six tephra layers to assess potential variations in magma chemistry throughout the course of the eruption. No variation is observed in volatile concentrations across the tephra layers, and there is no correlation between volatile concentrations and the explosivity of eruptive pulses leading to the November explosive event. H 2 O concentrations within MI suggest moderately hydrous magmas up to 2.4 wt% H 2 O and a large range in CO 2 concentrations in the MI (14–2,180 ppm) from Secondary Ion Mass Spectrometry and vapor bubble reconstructions. H 2 O and CO 2 measurements correspond to entrapment pressures up to 400 MPa (entrapment depths ∼15 km), but with modal storage around 100–200 MPa. H 2 O contents can be reconciled with previous microlite number density estimates using a polybaric storage history.

Alaska↗

USGS2026

Hydrothermal manganese-oxide mineralization of a carbonate ooze, Samoan hotspot region, South Pacific Ocean

Low-temperature hydrothermal manganese oxides occur throughout the global oceans. However, the hydrothermal replacement of a carbonate ooze by manganese oxides is described here for the first time. The 24 samples dredged from three locations around the Territory of American Samoa in the South Pacific Ocean include six samples with remnant carbonate and volcaniclastic sediments, which we refer to as “low Mn,” and 18 samples in which the mineralization is pervasive and has replaced most original sediment, termed “high Mn.” The 18 high-Mn samples exhibit a mean Mn content of 51 wt.%. Higher Li and Mn contents and lower Fe contents in the high-Mn samples indicate a hydrothermal origin and distinguish these samples from hydrogenetic ferromanganese crusts. Mn-oxide layers are up to 90 mm thick, some with columns to 44 mm long and 10 mm wide, the magnitude of which has not been described previously. Samples are composed of birnessite and 10 Å phyllomanganate minerals. Textures of the thickest Mn layers indicate mineralization below the seabed from ascending fluids during multiple hydrothermal pulses. Mineralization took place by complete to partial replacement and cementation of foraminiferal sediments intermixed with volcaniclastic sediments in varying amounts. Our results highlight the production of carbonate sediment-hosted hydrothermal Mn oxides from multiple hydrothermal sources within the Samoan volcanic chain. The potential extensive distribution on the regional scale of this newly described mineralization process and unique element enrichments raise questions about its broader distribution globally and potential importance to hydrothermal processes, element mass balance, and seabed mineral resources.

Geochemistry, Geophysics, Geosystems↗