Geology ReportsSearch

USGS · 70033970

Classification of MEC with the ALLTEM at Camp Stanley, Texas

Abstract

The ALLTEM is a multi-axis electromagnetic induction system designed for unexploded ordnance UXO applications. It uses a continuous triangle-wave excitation and provides good late-time signal-to-noise ratio SNR especially for ferrous targets. Multi-axis transmitter Tx and receiver Rx systems such as ALLTEM provide a richer data set from which to invert for the target parameters required to distinguish between clutter and UXO. Inversions of field data acquired between 2006 and 2010 over the Army's UXO Standardized Test sites at the Yuma Proving Ground YPG in Arizona and at the Aberdeen Proving Ground APG in Maryland have produced reasonable and generally repeatable results for many UXO items buried at different orientations and depths. In February-March 2011 ALLTEM data was acquired at two locations on the Camp Stanley Storage Activity CSSA just north of San Antonio, Texas. Camp Stanley is used to store munitions as well as test, fire, and overhaul munitions components. Site B-20 is an open burn/open detonation OBOD area and Site B-27 consists of narrow trenches blasted into limestone containing buried range and munitions debris and possibly MEC. The processing, analysis, and classification techniques developed at the controlled environments of YPG and APG have been applied to these two "live" sites at Camp Stanley. ALLTEM data analysis includes both classical numerical inversion of data from each anomaly and clustering of the raw data by means of a self-organizing map SOM via generalized neural network algorithms. Final classification consists of an integration of both the numerical and SOM results. ?? 2011 Society of Exploration Geophysicists.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

T. Asch, C. Moulton, D.V. Smith. 2011-05-25. Classification of MEC with the ALLTEM at Camp Stanley, Texas. https://doi.org/10.1190/1.3627456

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Near-surface, marine seismic-reflection data defines potential hydrogeologic confinement bypass in a tertiary carbonate aquifer, southeastern Florida

Approximately 210 km of near-surface, high-frequency, marine seismic-reflection data were acquired on the southeastern part of the Florida Platform between 2007 and 2011. Many high-resolution, seismic-reflection profiles, interpretable to a depth of about 730 m, were collected on the shallow-marine shelf of southeastern Florida in water as shallow as 1 m. Landward of the present-day shelf-margin slope, these data image middle Eocene to Pleistocene strata and Paleocene to Pleistocene strata on the Miami Terrace. This high-resolution data set provides an opportunity to evaluate geologic structures that cut across confining units of the Paleocene to Oligocene-age carbonate rocks that form the Floridan aquifer system.Seismic profiles image two structural systems, tectonic faults and karst collapse structures, which breach confining beds in the Floridan aquifer system. Both structural systems may serve as pathways for vertical groundwater flow across relatively low-permeability carbonate strata that separate zones of regionally extensive high-permeability rocks in the Floridan aquifer system. The tectonic faults occur as normal and reverse faults, and collapse-related faults have normal throw. The most common fault occurrence delineated on the reflection profiles is associated with karst collapse structures. These high-frequency seismic data are providing high quality structural analogs to unprecedented depths on the southeastern Florida Platform. The analogs can be used for assessment of confinement of other carbonate aquifers and the sealing potential of deeper carbonate rocks associated with reservoirs around the world.

Florida

Multi-channel analysis of surface waves MASW of models with high shear-wave velocity contrast

We use the multi-channel analysis of surface waves MASW method to analyze synthetic seismic data calculated using models with high shear-wave velocity Vs contrast. The MASW dispersion-curve images of the Rayleigh wave are obtained using various sets of source-offset and spread-size configurations from the synthetic seismic data and compared with the theoretically calculated fundamental- and higher-mode dispersion-curves. Such tests showed that most of the dispersion-curve images are dominated by higher-mode energy at the low frequencies, especially when analyzing data from long receiver offsets and thus significantly divert from numerically expected dispersion-curve trends, which can lead to significant Vs overestimation. Further analysis showed that using data with relatively short spread lengths and source offsets can image the desired fundamental-mode of the Rayleigh wave that matches the numerically expected dispersion-curve pattern. As a result, it was concluded that it might be possible to avoid higher-mode contamination at low frequencies at sites with high Vs contrast by appropriate selection of spread size and seismic source offset. ?? 2011 Society of Exploration Geophysicists.

SEG Technical Program Expanded Abstracts

Rock formation characterization for CO2-EOR and carbon geosequestration; 3D seismic amplitude and coherency anomalies, Wellington Field, Kansas, USA

In this paper, we present a workflow for a Mississipian carbonates characterization case-study integrating post-stack seismic attributes, well-logs porosities, and seismic modeling to explore relating changes in small-scale "lithofacies" properties and/or sub-seismic resolution faulting to key amplitude and coherency 3D seismic attributes. The main objective of this study is to put emphasis on reservoir characterization that is both optimized for and subsequently benefiting from pilot tertiary CO2-EOR in preparation for future carbon geosequestration in a depleting reservoir and a deep saline aquifer. The extracted 3D seismic coherency attribute indicated anomalous features that can be interpreted as a lithofacies change or a sub-seismic resolution faulting. A 2D finite difference modeling has been undertaken to understand and potentially build discriminant attributes to map structural and/or lithofacies anomalies of interest especially when embarking upon CO2-EOR and/or carbon sequestration monitoring and management projects. ?? 2011 Society of Exploration Geophysicists.

SEG Technical Program Expanded Abstracts