Geology Reports⌕ Search
Home/Archive/USGS

USGS · 70032872

Integrated treatment process using a natural Wyoming clinoptilolite for remediating produced waters from coalbed natural gas operations

H. Zhao·G.F. Vance·M.A. Urynowicz·R.W. Gregory
View original source ↗Export metadata ↓

Abstract

Coalbed natural gas (CBNG) development in western U.S. states has resulted in an increase in an essential energy resource, but has also resulted in environmental impacts and additional regulatory needs. A concern associated with CBNG development relates to the production of the copious quantities of potentially saline-sodic groundwater required to recover the natural gas, hereafter referred to as CBNG water. Management of CBNG water is a major environmental challenge because of its quantity and quality. In this study, a locally available Na-rich natural zeolite (clinoptilolite) from Wyoming (WY) was examined for its potential to treat CBNG water to remove Na+ and lower the sodium adsorption ratio (SAR, mmol1/2 L- 1/2). The zeolite material was Ca-modified before being used in column experiments. Column breakthrough studies indicated that a metric tonne (1000??kg) of Ca-WY-zeolite could be used to treat 60,000??L of CBNG water in order to lower SAR of the CBNG water from 30 to an acceptable level of 10??mmol1/2 L- 1/2. An integrated treatment process using Na-WY-zeolite for alternately treating hard water and CBNG water was also examined for its potential to treat problematic waters in the region. Based on the results of this study, use of WY-zeolite appears to be a cost-effective water treatment technology for maximizing the beneficial use of poor-quality CBNG water. Ongoing studies are evaluating water treatment techniques involving infiltration ponds lined with zeolite. ?? 2008 Elsevier B.V. All rights reserved.

Explore related subjects

Applied Clay ScienceArticle

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

H. Zhao, G.F. Vance, M.A. Urynowicz, R.W. Gregory. 2009. Integrated treatment process using a natural Wyoming clinoptilolite for remediating produced waters from coalbed natural gas operations. https://doi.org/10.1016/j.clay.2008.03.007

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2006

Influence of layer charge and charge distribution of smectites on the flow behaviour and swelling of bentonites

The influence of layer charge and charge distribution of dioctahedral smectites on the rheological and swelling properties of bentonites is examined. Layer charge and charge distribution were determined by XRD using the LayerCharge program [Christidis, G.E., Eberl, D.D., 2003. Determination of layer charge characteristics of smectites. Clays Clay Miner. 51, 644-655.]. The rheological properties were determined, after sodium exchange using the optimum amount of Na2CO3, from free swelling tests. Rheological properties were determined using 6.42% suspensions according to industrial practice. In smectites with layer charges of - 0.425 to - 0.470 per half formula unit (phfu), layer charge is inversely correlated with free swelling, viscosity, gel strength, yield strength and thixotropic behaviour. In these smectites, the rheological properties are directly associated with the proportion of low charge layers. By contrast, in low charge and high charge smectites there is no systematic relation between layer charge or the proportion of low charge layers and rheological properties. However, low charge smectites yield more viscous suspensions and swell more than high charge smectites. The rheological properties of bentonites also are affected by the proportion of tetrahedral charge (i.e. beidellitic charge), by the existence of fine-grained minerals having clay size, such as opal-CT and to a lesser degree by the ionic strength and the pH of the suspension. A new method for classification of smectites according to the layer charge based on the XRD characteristics of smecites is proposed, that also is consistent with variations in rheological properties. In this classification scheme the term smectites with intermediate layer charge is proposed. ?? 2006 Elsevier B.V. All rights reserved.

Applied Clay Science↗
USGS2004

Surface complexation model of uranyl sorption on Georgia kaolinite

The adsorption of uranyl on standard Georgia kaolinites (KGa-1 and KGa-1B) was studied as a function of pH (3–10), total U (1 and 10 μmol/l), and mass loading of clay (4 and 40 g/l). The uptake of uranyl in air-equilibrated systems increased with pH and reached a maximum in the near-neutral pH range. At higher pH values, the sorption decreased due to the presence of aqueous uranyl carbonate complexes. One kaolinite sample was examined after the uranyl uptake experiments by transmission electron microscopy (TEM), using energy dispersive X-ray spectroscopy (EDS) to determine the U content. It was found that uraniumwas preferentially adsorbed by Ti-rich impurity phases (predominantly anatase), which are present in the kaolinite samples. Uranyl sorption on the Georgia kaolinites was simulated with U sorption reactions on both titanol and aluminol sites, using a simple non-electrostatic surface complexation model (SCM). The relative amounts of U-binding >TiOH and >AlOH sites were estimated from the TEM/EDS results. A ternary uranyl carbonate complex on the titanol site improved the fit to the experimental data in the higher pH range. The final model contained only three optimised log K values, and was able to simulate adsorption data across a wide range of experimental conditions. The >TiOH (anatase) sites appear to play an important role in retaining U at low uranyl concentrations. As kaolinite often contains trace TiO 2 , its presence may need to be taken into account when modelling the results of sorption experiments with radionuclides or trace metals on kaolinite.

Applied Clay Science↗
USGS1992

Dioctahedral smectite reactions at elevated temperatures: Effects of K-availability, Na/K ratio and ionic strength

Hydrothermal experiments were conducted to measure the effects of K availability, Na / K ratio and ionic strength in chloride solutions on the rate and extent of the reaction of smectite to interstratified illite/smectite. The < 2 μm fraction of a bentonite was treated hydrothermally at temperatures of 200, 250, 300, 350, 400 and 450°C for run times of up to 30 days in the presence of 0.33, 0.66 and 1.00 equivalents of K per O 10 (OH) 2 . The effect of K-content on reaction progress is dramatic at low (0.33 eq.) K concentrations, but diminishes above a concentration of 0.66 equivalents. The effect of K-content is also more important at lower temperatures than at higher temperatures. Addition of K above that required to satisfy the cation exchange capacity of the smectite reduced the amount of chlorite byproduct and produced authigenic K-feldspar at the highest K-concentration. Similar experiments were run using Na / K equivalent ratios of 0 to 25 and total solution molalities of 0 to 3.75 molal. Because these experiments were small fixed-volume experiments, it was necessary to vary two of the three key variables (K-content, Na / K ratio, ionic strength simultaneously. The data suggest, however, that K-content has a much stronger effect than either Na / K ratio or ionic strength on illitization reaction progress.

Applied Clay Science↗