The flow dynamics of an extremely large volume pyroclastic flow, the 2.08-Ma Cerro Galán Ignimbrite, NW Argentina, and comparison with other flow types

Ray A.F. Cas; Heather M. Wright; Christopher B. Folkes; Chiara Lesti; Massimiliano Porreca; Guido Giordano; Jose G. Viramonte

doi:10.1007/s00445-011-0564-y

Home/Archive/USGS

USGS · 70032518

The flow dynamics of an extremely large volume pyroclastic flow, the 2.08-Ma Cerro Galán Ignimbrite, NW Argentina, and comparison with other flow types

Ray A.F. Cas·Heather M. Wright·Christopher B. Folkes·Chiara Lesti·Massimiliano Porreca·Guido Giordano·Jose G. Viramonte

View original source ↗Export metadata ↓

Abstract

The 2.08-Ma Cerro Galán Ignimbrite (CGI) represents a >630-km 3 dense rock equivalent (VEI 8) eruption from the long-lived Cerro Galán magma system (&sim;6 Ma). It is a crystal-rich (35–60%), pumice (<10% generally) and lithic-poor (<5% generally) rhyodacitic ignimbrite, lacking a preceding plinian fallout deposit. The CGI is preserved up to 80 km from the structural margins of the caldera, but almost certainly was deposited up to 100 km from the caldera in some places. Only one emplacement unit is preserved in proximal to medial settings and in most distal settings, suggesting constant flow conditions, but where the pyroclastic flow moved into a palaeotopography of substantial valleys and ridges, it interacted with valley walls, resulting in flow instabilities that generated multiple depositional units, often separated by pyroclastic surge deposits. The CGI preserves a widespread sub-horizontal fabric, defined by aligned elongate pumice and lithic clasts, and minerals (e.g. biotite). A sub-horizontal anisotropy of magnetic susceptibility fabric is defined by minute magnetic minerals in all localities where it has been analysed. The CGI is poor in both vent-derived (‘accessory’) lithics and locally derived lithics from the ground surface (‘accidental’) lithics. Locally derived lithics are small (<20 cm) and were not transported far from source points. All data suggest that the pyroclastic flow system producing the CGI was characterised throughout by high sedimentation rates, resulting from high particle concentration and suppressed turbulence at the depositional boundary layer, despite being a low aspect ratio ignimbrite. Based on these features, we question whether high velocity and momentum are necessary to account for extensive flow mobility. It is proposed that the CGI was deposited by a pyroclastic flow system that developed a substantial, high particle concentration granular under-flow, which flowed with suppressed turbulence. High particle concentration and fine-ash content hindered gas loss and maintained flow mobility. In order to explain the contemporaneous maintenance of high particle concentration, high sedimentation rate at the depositional boundary layer and a high level of mobility, it is also proposed that the flow(s) was continuously supplied at a high mass feeding rate. It is also proposed that internal gas pressure within the flow, directed downwards onto the substrate over which the flow was passing, reduced the friction between the flow and the substrate and also enhanced its mobility. The pervasive sub-horizontal fabric of aligned pumice, lithic and even biotite crystals indicates a consistent horizontal shear force existed during transport and deposition in the basal granular flow, consistent with the existence of a laminar, shearing, granular flow regime during the final stages of transport and deposition.

Explore related subjects

Bulletin of Volcanology Article

Source-reported bounding extent: -27.527758206861897° to -25.005972656239177° latitude; -66.884765625° to -64.0283203125° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Ray A.F. Cas, Heather M. Wright, Christopher B. Folkes, Chiara Lesti, Massimiliano Porreca, Guido Giordano, Jose G. Viramonte. 2011-11-16. The flow dynamics of an extremely large volume pyroclastic flow, the 2.08-Ma Cerro Galán Ignimbrite, NW Argentina, and comparison with other flow types. https://doi.org/10.1007/s00445-011-0564-y

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

Geophysical insights into Kīlauea’s eruptive reawakening after its 2018 eruption and caldera collapse

A little more than two years after the destructive 2018 lower East Rift Zone eruption and summit collapse ended, renewed volcanic activity began at Kīlauea volcano, Hawaiʻi. During 2020–2025, activity at the volcano included six eruptions in the summit caldera, one in the Southwest Rift Zone, and one in the middle East Rift Zone, as well as multiple non-eruptive intrusions in all three locations. We categorize the volcano’s activity post-2018 into four phases based on eruption locations and style, as well as patterns of magma storage and migration inferred from geophysical data. In some cases, these observations illuminated parts of the volcano’s magmatic system for the first time since the advent of modern geophysical monitoring—particularly deformation datasets that include tilt, continuous GNSS, and InSAR. Analyses of these geodetic data and complementary seismic, geological, and geochemical observations provide an opportunity to explore summit and rift zone connectivity, rift-zone magma storage conditions, the variable geophysical manifestations of eruption onsets, magma-fault interactions, and other long-standing questions associated with eruptions and intrusions at Kīlauea.

Hawaii↗

USGS2026

An extensive and short-lived episode of mid-Holocene fayalite- bearing high-silica rhyolite eruptions at Mono Craters, California

Having last erupted ~ 700 years ago, the Mono Craters volcanic chain is an active system with a history of explosive and effusive high-silica rhyolite eruptions. Approximately ~ 30 lava domes and flows range from ~ 42 to ~ 0.7 ka, form a ~ 15 km curvilinear trend, and change mineralogy (biotite-, orthopyroxene-, or fayalite-bearing) and crystallinity through time. However, the eruptive chronology of this system is incompletely understood. We report new 238 U- 230 Th isochron ages for nine fayalite-bearing domes from paired zircon and allanite crystal surfaces that reveal a major shift in eruptive frequency and volume over the history of the chain, with extrusion of > 0.45 km 3 of high-silica rhyolite lava between 7.1 and 5.2 ka. This contrasts with older biotite- (~ 42–20 ka) and orthopyroxene-bearing (~ 12–9 ka) domes, each of which erupted smaller volumes over a more protracted period. Whole-rock compositions suggest these older domes tapped separate domains within a shared magmatic system because the former are higher in Sr and Ba whereas the latter are lower in SiO 2 , higher in Zr, and more enriched in light rare-earth elements. Titanomagnetite chemistry and zircon saturation temperatures also reflect changing magma compositions and conditions associated with these domes. Fayalite-bearing domes, in contrast, have uniform whole-rock and titanomagnetite compositions which support rapid extrusion of magma over an interval short enough to prevent Fe-Ti oxides from recording any changes in magmatic conditions. The youngest lavas were also produced in a short-lived episode ~ 700 years ago, showing that multivent, geologically brief eruptive episodes occur repeatedly at Mono Craters.

California↗

USGS2026

Satellite observations, plume dynamics and volcanic lightning from the 2023 eruption of Shishaldin Volcano, Alaska

The 2023 eruption of Shishaldin Volcano, Alaska, provided an unusually well-monitored example of a “dry” (non-hydromagmatic) explosive basaltic eruption with sustained, buoyant plumes, and pyroclastic density currents. Here, we examine the 13 basaltic paroxysms that occurred between July and November 2023 using geostationary satellite observations, plume modeling, and volcanic lightning detection to characterize mass eruption rates and plume dynamics. We show that seven volcanic plumes reached 10–14 km above sea level, sustained for minutes to tens of minutes. Translating plume heights into mass eruption rates, using both empirical scaling and one-dimensional plume modeling, gives peak rates of 10 4 –10 7 kg·s −1 and a total erupted volume of ~ 0.05 km 3 (dense rock equivalent) across the eruption sequence. Despite the moderate intensity of this eruption, automated satellite detection algorithms generally failed to detect volcanic ash. We attribute this persistent challenge to the fines-poor grain size distribution of the eruption. Volcanic lightning provides an additional window into the eruption dynamics. A total of 491 volcanic lightning flashes were detected, concentrated during seven of the most energetic phases. The timing of this electrical activity suggests that lightning only became detectable by the global lightning monitoring network when plumes ascended to atmospheric levels favorable for ice formation. Based on the available data, we infer that the low fine ash content of the plumes, combined with minimal water and ice, led to the overall modest rates of lightning (1–13 flashes per minute) compared to “wet” eruptions of similar intensity. These results show that combining satellite observations, plume modeling, and lightning detection provides a valuable timeline of eruptive intensity, even for “dry” basaltic eruptions in remote locations.

Alaska↗