Geology Reports⌕ Search
Home/Archive/USGS

USGS · 70030406

Thermodynamic calculations in the system CH4-H2O and methane hydrate phase equilibria

S. Circone·S. H. Kirby·L.A. Stern
View original source ↗Export metadata ↓

Abstract

Using the Gibbs function of reaction, equilibrium pressure, temperature conditions for the formation of methane clathrate hydrate have been calculated from the thermodynamic properties of phases in the system CH4-H 2O. The thermodynamic model accurately reproduces the published phase-equilibria data to within ??2 K of the observed equilibrium boundaries in the range 0.08-117 MPa and 190-307 K. The model also provides an estimate of the third-law entropy of methane hydrate at 273.15 K, 0.1 MPa of 56.2 J mol-1 K-1 for 1/n CH4??H 2O, where n is the hydrate number. Agreement between the calculated and published phase-equilibria data is optimized when the hydrate composition is fixed and independent of the pressure and temperature for the conditions modeled. ?? 2006 American Chemical Society.

Explore related subjects

Journal of Physical Chemistry BArticle

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

S. Circone, S. H. Kirby, L.A. Stern. 2006-04-04. Thermodynamic calculations in the system CH4-H2O and methane hydrate phase equilibria. https://doi.org/10.1021/jp055422f

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2005

Direct measurement of methane hydrate composition along the hydrate equilibrium boundary

The composition of methane hydrate, namely n w for CH 4 · n w H 2 O, was directly measured along the hydrate equilibrium boundary under conditions of excess methane gas. Pressure and temperature conditions ranged from 1.9 to 9.7 MPa and 263 to 285 K. Within experimental error, there is no change in hydrate composition with increasing pressure along the equilibrium boundary, but n w may show a slight systematic decrease away from this boundary. A hydrate stoichiometry of n w = 5.81−6.10 H 2 O describes the entire range of measured values, with an average composition of CH 4 ·5.99(±0.07)H 2 O along the equilibrium boundary. These results, consistent with previously measured values, are discussed with respect to the widely ranging values obtained by thermodynamic analysis. The relatively constant composition of methane hydrate over the geologically relevant pressure and temperature range investigated suggests that in situ methane hydrate compositions may be estimated with some confidence.

Journal of Physical Chemistry B↗
USGS2003

CO2 hydrate: Synthesis, composition, structure, dissociation behavior, and a comparison to structure I CH4 hydrate

Structure I (sI) carbon dioxide (CO 2 ) hydrate exhibits markedly different dissociation behavior from sI methane (CH 4 ) hydrate in experiments in which equilibrated samples at 0.1 MPa are heated isobarically at 13 K/h from 210 K through the H 2 O melting point (273.15 K). The CO 2 hydrate samples release only about 3% of their gas content up to temperatures of 240 K, which is 22 K above the hydrate phase boundary. Up to 20% is released by 270 K, and the remaining CO 2 is released at 271.0 plusmn; 0.5 K, where the sample temperature is buffered until hydrate dissociation ceases. This reproducible buffering temperature for the dissociation reaction CO 2 ·nH 2 O = CO 2 (g) + nH 2 O(1 to s) is measurably distinct from the pure H 2 O melting point at 273.15 K, which is reached as gas evolution ceases. In contrast, when si CH 4 hydrate is heated at the same rate at 0.1 MPa, >95% of the gas is released within 25 K of the equilibrium temperature (193 K at 0.1 MPa). In conjunction with the dissociation study, a method for efficient and reproducible synthesis of pure polycrystalline CO 2 hydrate with suitable characteristics for material properties testing was developed, and the material was characterized. CO 2 hydrate was synthesized from CO 2 liquid and H 2 O solid and liquid reactants at pressures between 5 and 25 MPa and temperatures between 250 and 281 K. Scanning electron microscopy (SEM) examination indicates that the samples consist of dense crystalline hydrate and 50-300 μm diameter pores that are lined with euhedral cubic hydrate crystals. Deuterated hydrate samples made by this same procedure were analyzed by neutron diffraction at temperatures between 4 and 215 K; results confirm that complete conversion of water to hydrate has occurred and that the measured unit cell parameter and thermal expansion are consistent with previously reported values. On the basis of measured weight gain after synthesis and gas yields from the dissociation experiments, approximately all cages in the hydrate structure are filled such that n ≈ 5.75.

Journal of Physical Chemistry B↗