Geology ReportsSearch

USGS · 70028267

An evaluation of the strong ground motion recorded during the May 1, 2003 Bingol Turkey, earthquake

Abstract

An important record of ground motion from a M 6.4 earthquake occurring on May 1, 2003, at epicentral and fault distances of about 12 and 9 km, respectively, was obtained at a station near the city of Bingöl, Turkey. The maximum peak ground values of 0.55g and 36 cm/s are among the largest ground-motion amplitudes recorded in Turkey. From simulations and comparisons with ground motions from other earthquakes of comparable magnitude, we conclude that the ground motion over a range of frequencies is unusually high. Site response may be responsible for the elevated ground motion, as suggested from analysis of numerous aftershock recordings from the same station. The mainshock motions have some interesting seismological features, including ramps between the P- and S-wave that are probably due to near- and intermediate-field elastic motions and strong polarisation oriented at about 39 degrees to the fault (and therefore not in the fault-normal direction). Simulations of motions from an extended rupture explain these features. The N10E component shows a high-amplitude spectral acceleration at a period of 0.15 seconds resulting in a site specific design spectrum that significantly overestimates the actual strength and displacement demands of the record. The pulse signal in the N10E component affects the inelastic spectral displacement and increases the inelastic displacement demand with respect to elastic demand for very long periods.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Sinan Akkar, David M. Boore, Polat Gulkan. 2005. An evaluation of the strong ground motion recorded during the May 1, 2003 Bingol Turkey, earthquake. https://doi.org/10.1142/s1363246905001888

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Improved ASCE/SEI 7-10 ground-motion scaling procedure for nonlinear analysis of buildings

An improved ASCE/SEI 7–10 ground-motion scaling procedure for three-dimensional (3D) response history analysis (RHA) of buildings is presented. In this procedure, different scale factors for two horizontal components of the ground motion are used, and their spectral shapes are considered in ground-motion selection stage. The accuracy of the improved procedure is evaluated by utilizing 3D models of nine asymmetric-plan buildings. It is demonstrated that the improved procedure provides on average 15% conservative estimates of engineering demand parameters while the original version underestimates them on average 29%. Thus, the improved ground-motion selection and scaling procedure is found to be appropriate for nonlinear RHAs of multi-story plan-asymmetric buildings.

Journal of Earthquake Engineering

Variability in wood-frame building damage using broad-band synthetic ground motions: a comparative numerical study with recorded motions

Earthquake damage to light-frame wood buildings is a major concern for North America because of the volume of this construction type. In order to estimate wood building damage using synthetic ground motions, we need to verify the ability of synthetically generated ground motions to simulate realistic damage for this structure type. Through a calibrated damage potential indicator, four different synthetic ground motion models are compared with the historically recorded ground motions at corresponding sites. We conclude that damage for sites farther from the fault (>20 km) is under-predicted on average and damage at closer sites is sometimes over-predicted.

Journal of Earthquake Engineering

Database for earthquake strong motion studies in Italy

We describe an Italian database of strong ground motion recordings and databanks delineating conditions at the instrument sites and characteristics of the seismic sources. The strong motion database consists of 247 corrected recordings from 89 earthquakes and 101 recording stations. Uncorrected recordings were drawn from public web sites and processed on a record-by-record basis using a procedure utilized in the Next-Generation Attenuation (NGA) project to remove instrument resonances, minimize noise effects through low- and high-pass filtering, and baseline correction. The number of available uncorrected recordings was reduced by 52% (mostly because of s-triggers) to arrive at the 247 recordings in the database. The site databank includes for every recording site the surface geology, a measurement or estimate of average shear wave velocity in the upper 30 m (V s30 ), and information on instrument housing. Of the 89 sites, 39 have on-site velocity measurements (17 of which were performed as part of this study using SASW techniques). For remaining sites, we estimate V s30 based on measurements on similar geologic conditions where available. Where no local velocity measurements are available, correlations with surface geology are used. Source parameters are drawn from databanks maintained (and recently updated) by Istituto Nazionale di Geofisica e Vulcanologia and include hypocenter location and magnitude for small events (M< ??? 5.5) and finite source parameters for larger events. ?? 2009 A.S. Elnashai & N.N. Ambraseys.

Journal of Earthquake Engineering