Geology Reports⌕ Search

USGS · 70027017

Radon (222Rn) in ground water of fractured rocks: A diffusion/ion exchange model

Abstract

Ground waters from fractured igneous and high‐grade sialic metamorphic rocks frequently have elevated activity of dissolved radon ( 222 Rn). A chemically based model is proposed whereby radium ( 226 Ra) from the decay of uranium ( 238 U) diffuses through the primary porosity of the rock to the water‐transmitting fracture where it is sorbed on weathering products. Sorption of 226 Ra on the fracture surface maintains an activity gradient in the rock matrix, ensuring a continuous supply of 226 Ra to fracture surfaces. As a result of the relatively long half‐life of 226 Ra (1601 years), significant activity can accumulate on fracture surfaces. The proximity of this sorbed 226 Ra to the active ground water flow system allows its decay progeny 222 Rn to enter directly into the water. Laboratory analyses of primary porosity and diffusion coefficients of the rock matrix, radon emanation, and ion exchange at fracture surfaces are consistent with the requirements of a diffusion/ion‐exchange model. A dipole‐brine injection/withdrawal experiment conducted between bedrock boreholes in the high‐grade metamorphic and granite rocks at the Hubbard Brook Experimental Forest, Grafton County, New Hampshire, United States (42°56′N, 71°43′W) shows a large activity of 226 Ra exchanged from fracture surfaces by a magnesium brine. The 226 Ra activity removed by the exchange process is 34 times greater than that of 238 U activity. These observations are consistent with the diffusion/ion‐exchange model. Elutriate isotopic ratios of 223 Ra/ 226 Ra and 238 U/ 226 Ra are also consistent with the proposed chemically based diffusion/ion‐exchange model.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

W.W. Wood, T. F. Kraemer, A. Shapiro. 2005-12-13. Radon (222Rn) in ground water of fractured rocks: A diffusion/ion exchange model. https://doi.org/10.1111/j.1745-6584.2004.tb02624.x

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Evaluating micrometeorological estimates of groundwater discharge from Great Basin desert playas

Groundwater availability studies in the arid southwestern United States traditionally have assumed that groundwater discharge by evapotranspiration (ETg) from desert playas is a significant component of the groundwater budget. However, desert playa ETg rates are poorly constrained by Bowen Ratio energy budget (BREB) and eddy-covariance (EC) micrometeorological measurement approaches. Best attempts by previous studies to constrain ETg from desert playas have resulted in ETg rates that are within the measurement error of micrometeorological approaches. This study uses numerical models to further constrain desert playa ETg rates that are within the measurement error of BREB and EC approaches, and to evaluate the effect of hydraulic properties and salinity-based groundwater-density contrasts on desert playa ETg rates. Numerical models simulated ETg rates from desert playas in Death Valley, California and Dixie Valley, Nevada. Results indicate that actual ETg rates from desert playas are significantly below the uncertainty thresholds of BREB- and EC-based micrometeorological measurements. Discharge from desert playas likely contributes less than 2 percent of total groundwater discharge from Dixie and Death Valleys, which suggests discharge from desert playas also is negligible in other basins. Simulation results also show that ETg from desert playas primarily is limited by differences in hydraulic properties between alluvial fan and playa sediments and, to a lesser extent, by salinity-based groundwater density contrasts.

Ground Water↗

A semi-structured MODFLOW-USG model to evaluate local water sources to wells for decision support

In order to better represent the configuration of the stream network and simulate local groundwater-surface water interactions, a version of MODFLOW with refined spacing in the topmost layer was applied to a Lake Michigan Basin (LMB) regional groundwater-flow model developed by the U.S. Geological. Regional MODFLOW models commonly use coarse grids over large areas; this coarse spacing precludes model application to local management issues (e.g., surface-water depletion by wells) without recourse to labor-intensive inset models. Implementation of an unstructured formulation within the MODFLOW framework (MODFLOW-USG) allows application of regional models to address local problems. A “semi-structured” approach (uniform lateral spacing within layers, different lateral spacing among layers) was tested using the LMB regional model. The parent 20-layer model with uniform 5000-foot (1524-m) lateral spacing was converted to 4 layers with 500-foot (152-m) spacing in the top glacial (Quaternary) layer, where surface water features are located, overlying coarser resolution layers representing deeper deposits. This semi-structured version of the LMB model reproduces regional flow conditions, whereas the finer resolution in the top layer improves the accuracy of the simulated response of surface water to shallow wells. One application of the semi-structured LMB model is to provide statistical measures of the correlation between modeled inputs and the simulated amount of water that wells derive from local surface water. The relations identified in this paper serve as the basis for metamodels to predict (with uncertainty) surface-water depletion in response to shallow pumping within and potentially beyond the modeled area, see Fienen et al. (2015a).

Illinois, Indiana, Michigan, Wisconsin↗

Extending the MODPATH algorithm to rectangular unstructured grids

The recent release of MODFLOW-USG, which allows model grids to have irregular, unstructured connections, requires a modification of the particle-tracking algorithm used by MODPATH. This paper describes a modification of the semi-analytical particle-tracking algorithm used by MODPATH that allows it to be extended to rectangular-based unstructured grids by dividing grid cells with multi-cell face connections into sub-cells. The new method will be incorporated in the next version of MODPATH which is currently under development.

Ground Water↗