Geology ReportsSearch

USGS · 70026082

Constraints on the composition of ore fluids and implications for mineralising events at the Cleo gold deposit, Eastern Goldfields Province, Western Australia

Abstract

The Cleo gold deposit, 55 km south of Laverton in the Eastern Goldfields Province of Western Australia, is characterised by banded iron-formation (BIF)-hosted ore zones in the gently dipping Sunrise Shear Zone and high-grade vein-hosted ore in the Western Lodes. There is evidence that gold mineralisation in the Western Lodes (which occurred at ca 2655 Ma) post-dates the majority of displacement along the Sunrise Shear Zone, but it remains uncertain if the ore in both structures formed simultaneously or separately. Overall, the Pb, Nd, Sr, C. O and S isotopic compositions of ore-related minerals from both the Western Lodes and ore zones in the Sunrise Shear Zone are similar. Early low-salinity aqueous-carbonic fluids and late high-salinity fluids with similar characteristics are trapped in inclusions in quartz veins from both the Sunrise Shear Zone and the Western Lodes. The early CO2, CO2-H2O, and H2O- dominant inclusions are interpreted as being related to ore formation, and to have formed from a single low-salinity aqueous-carbonic fluid as a result of intermittent fluid immiscibility. Homogenisation temperatures indicate that these inclusions were trapped at approximately 280??C and at approximately 4 km depth, in the deeper epizonal range. Differences between the ore zones are detected in the trace-element composition of gold samples, with gold from the Sunrise Shear Zone enriched in Ni, Pb, Sn, Te and Zn, and depleted In As, Bi, Cd, Cu and Sb, relative to gold from the Western Lodes. Although there are differences in gold composition between the Sunrise Shear Zone and Western Lodes, and hence the metal content of ore fluids may have varied slightly between the different ore zones, no other systematic fluid or solute differences are detected between the ore zones. Given the fact that the ore fluids in each zone have very similar bulk properties, the considerable differences in gold grade, sulfide mineral abundance, and ore textures between the two ore zones most likely result from different gold-deposition mechanisms. The association of ore zones in the Sunrise Shear Zone with pyrite-replaced BIF suggests that wall-rock sulfidation was the most significant mechanism of gold precipitation, through the destabilisation of gold-bisulfide complexes. The Western Lodes, however, do not exhibit any host-rock preference and multistage veins commonly contain coarse-grained gold. Fluid-inclusion characteristics and breccia textures in veins in the Western Lodes suggest that rapid pressure changes, brought about by intermittent release of overpressured fluids and concomitant phase separation, are likely to have caused the destabilisation of gold-thiocomplexes, leading to formation of higher-grade gold ore zones.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

S.M. Brown, C. A. Johnson, R.J. Watling, W. R. Premo. 2003. Constraints on the composition of ore fluids and implications for mineralising events at the Cleo gold deposit, Eastern Goldfields Province, Western Australia. https://doi.org/10.1046/j.1440-0952.2003.00971.x

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Detrital zircons and the magmatic history of Viti Levu, Fiji

We integrate the existing detrital zircon data from multiple modern river sediment samples on Viti Levu, Fiji, with the most current available geological and topographic mapping of the respective river drainage basins to compare detrital populations with potential bedrock sources. The temporal and spatial variations in zircon geochemistry supplement what is known from igneous rocks and confirm the petrological differences between plutonic and volcanic rocks from the Eocene to early Oligocene (Yavuna age, >30 Ma), middle Oligocene to middle Miocene (Wainimala age, 30–12.5 Ma), late Miocene (Colo age, 12.5–6.5 Ma) and latest Miocene (Namosi age, 6.5–5 Ma). The >30 Ma Yavuna-age zircons are restricted to areas that drain the previously mapped Yavuna Group. The 30–12.5 Ma zircons are found across central Viti Levu from west to east, and the 30–15 Ma zircons have distinctively low U/Yb and high Dy/Yb ratios. They are the best radiometric evidence of widespread early to middle Miocene arc magmatism in Fiji that was relatively U-poor. Peak deconvolution of the Colo age zircons from individual basins suggests the following ages for undated or poorly dated plutons from central Viti Levu. The large Mavuvu pluton is probably composed of multiple intrusions in the 12–10 Ma range, the Waiqa pluton is probably ca 10 Ma, and the Noikoro pluton is probably ca 9 Ma. There are zircons from unknown plutonic or volcanic sources between 8 and 7 Ma in western Viti Levu that have distinct Eu/Eu* ratios. We attribute the highest U/Yb ratios in some Colo age zircons to crustal anatexis. Namosi-age zircons are abundant in the Medrausucu Group and can be found scattered across Viti Levu.

Viti Levu

Controls on mineralisation in the Sierra Foothills gold province, central California, USA: A GIS-based reconnaissance prospectivity analysis

The assessment of spatial relationships between the location, abundance and size of orogenic-gold deposits in the highly endowed Sierra Foothills gold province in California, via the combination of field studies and a GIS-based analysis, illustrates the power of such an approach to the characterisation of important parameters of mineral systems, and the prediction of districts likely to host economic mineralisation. Regional- to deposit-scale reconnaissance mapping suggests that deposition of gold-bearing quartz veins occurred in second- and third-order, east-over-west thrusts during regional east - west compression and right-lateral transpression. At the district-scale, significant zones of mineralisation correspond with such transpressional reactivation zones and dilational jogs that developed during the Late Jurassic - Early Cretaceous along the misaligned segments of first-order faults throughout the Sierra Nevada Foothills Metamorphic Belt. Field-based observations and interpretation of GIS data (including solid geology, structural elements, deposit locations, magnetics, gravity) also highlight the importance of structural permeability contrasts, rheological gradients, and variations in fault orientation for localising mineralisation. Although this approach confirms empirical findings and produces promising results at the province scale, enhanced geological, structural, geophysical and geochronological data density is required to generate regionally consistent, high-quality input layers that improve predictive targeting at the goldfield to deposit-scale.

Australian Journal of Earth Sciences