Geology Reports⌕ Search
Home/Archive/USGS

USGS · 70025381

Variable post-Paleozoic deformation detected by seismic reflection profiling across the northwestern "prong" of New Madrid seismic zone

J.H. McBride·Andre J. M. Pugin·W.J. Nelson·T.H. Larson·S.L. Sargent·J.A. Devera·F.B. Denny·E.W. Woolery
View original source ↗Export metadata ↓

Abstract

High-resolution shallow seismic reflection profiles across the northwesternmost part of the New Madrid seismic zone (NMSZ) and northwestern margin of the Reelfoot rift, near the confluence of the Ohio and Mississippi Rivers in the northern Mississippi embayment, reveal intense structural deformation that apparently took place during the late Paleozoic and/or Mesozoic up to near the end of the Cretaceous Period. The seismic profiles were sited on both sides of the northeast-trending Olmsted fault, defined by varying elevations of the top of Mississippian (locally base of Cretaceous) bedrock. The trend of this fault is close to and parallel with an unusually straight segment of the Ohio River and is approximately on trend with the westernmost of two groups of northeast-aligned epicenters ("prongs") in the NMSZ. Initially suspected on the basis of pre-existing borehole data, the deformation along the fault has been confirmed by four seismic reflection profiles, combined with some new information from drilling. The new data reveal (1) many high-angle normal and reverse faults expressed as narrow grabens and anticlines (suggesting both extensional and compressional regimes) that involved the largest displacements during the late Cretaceous (McNairy); (2) a different style of deformation involving probably more horizontal displacements (i.e., thrusting) that occurred at the end of this phase near the end of McNairy deposition, with some fault offsets of Paleocene and younger units; (3) zones of steeply dipping faults that bound chaotic blocks similar to that observed previously from the nearby Commerce geophysical lineament (CGL); and (4) complex internal deformation stratigraphically restricted to the McNairy, suggestive of major sediment liquefaction or landsliding. Our results thus confirm the prevalence of complex Cretaceous deformations continuing up into Tertiary strata near the northern terminus of the NMSZ. ?? 2003 Elsevier Science B.V. All rights reserved.

Explore related subjects

TectonophysicsArticle

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

J.H. McBride, Andre J. M. Pugin, W.J. Nelson, T.H. Larson, S.L. Sargent, J.A. Devera, F.B. Denny, E.W. Woolery. 2003. Variable post-Paleozoic deformation detected by seismic reflection profiling across the northwestern "prong" of New Madrid seismic zone. https://doi.org/10.1016/s0040-1951(03)00157-4

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

GST-1: A high-resolution global sediment thickness model

Global Sediment Thickness 1 (GST-1) is a high-resolution sedimentary thickness model calculated on a 0.125° x 0.125° grid. It modifies the sediment thickness of the 1° x 1° Earth Crustal Model 1 (ECM1) by means of 3D inversions of free air gravity anomalies. GST-1 is calculated by performing structural inversions on high-density contrasts across two crustal boundaries: the sediment – basement interface and the crystalline crust – upper mantle interface. The inversions are calculated in each of ten overlapping 3D models that span the globe. These ten models are merged to obtain the GST-1 global model, providing an eight-fold increase in lateral spatial resolution in comparison with ECM1 and CRUST 1.0. Our sediment thickness model exploits the nearly continuous sampling of gravity data when compared to the irregular, sparse sampling of seismic refraction data. Sediment thickness values in GST-1 are in excellent agreement with independently derived cross sections from well-studied sedimentary basins, and within expected resolution limits of seismic refraction data. GST-1 offers a robust, high resolution global model of sedimentary thickness to support studies of sedimentary basins.

Tectonophysics↗
USGS2024

Fairweather transform boundary Oligocene to present orogenesis: Fairweather Range vertical extrusion and rotation of the Yakutat microplate at ca. 3 Ma

Oblique-slip along transform fault boundaries is often partitioned between a strike-slip system and thrust faults that accommodate contraction. However, topography along the Yakutat-North American transform (Fairweather fault), is asymmetric with low-terrain above active thrusts on the western, Yakutat side of the transform and high topography on the continental side with peaks >4500 m (Mount Fairweather: 4671 m) to the west of the Border Ranges fault, limited recorded earthquakes >M4, and no apparent reverse faults to generate the highest terrain. In this study we compile, for the first time, published U-Pb zircon, 40 Ar/ 39 Ar and K-Ar (hornblende, muscovite, and biotite) and U-Th/He and fission-track (zircon and apatite) bedrock ages (109) from 75 samples to investigate the exhumation history of the Fairweather Range region, complemented by a published detrital sample (ZFT and AFT) and 13 new 40 Ar/ 39 Ar (hornblende, biotite, and K-feldspar) ages on 9 bedrock samples from both sides of the Fairweather fault. Additionally, we examined published seismicity and geodetic data of the Fairweather region and assessed if plate paleo-vectors correlate with the cooling history of the Fairweather Range. Cooling age, seismic, and block-motion patterns indicate the Fairweather Range has been vertically extruded between the Fairweather and the Border Ranges faults as a coherent block since ca. 25 Ma. The pre-6 Ma Pacific plate motion (N30°W) aligns with the N33°W strike of the Fairweather Fault whereas a hypothetical pre-6 Ma Yakutat microplate paleo-vector of (N39°W) does not: indicating a post-6 Ma timing for Yakutat microplate counter-clockwise rotation (9°). We infer that rotation and impingement of the Yakutat microplate along the Fairweather fault at ca. 3 Ma led to the development of the Fairweather restraining bend and increased cooling rates. The resultant thickened Fairweather welt and the ∼30 km thick southeast end of the Yakutat microplate compounded double-indenter tectonics into Alaska's southeast convergent corner

Tectonophysics↗
USGS2024

A scaling relationship for the width of secondary deformation around strike-slip faults

Simple mechanical arguments suggest that slip along interlocked, rough faults, damages surrounding rocks. The same arguments require that the scale of secondary damage is proportional to the size of geometric irregularities along the main fault. This relationship could apply at all scales, but has, so far, been difficult to observe at the 10s to 100 s of km scales of large, natural faults, often because large-scale deformation is distributed across wide, complex plate-boundary fault systems, like the San Andreas Fault. The geometry and geology of another large-scale plate-boundary strike slip fault—the Queen Charlotte Fault (QCF)—is, in contrast, especially simple. Here, we show that observations of secondary deformation are well-aligned with predictions of stress variations caused by geometric irregularities along the QCF, suggesting a geometric relationship between primary fault geometry and secondary deformation. The analytic stress solution reveals that the highest stresses and highest likelihood of failure are confined to a zone of influence (ZOI) with a width quantified by ZOI = λ / 2 π "> ZOI=λ/2π , where λ is the wavelength of geometric variations along the main fault. This simple model is consistent with ∼100-km-scale observations along the QCF and can theoretically be used to predict the width of secondary deformation at all scales.

Queen Charlotte Fault↗