Geology Reports⌕ Search
Home/Archive/USGS

USGS · 70024684

Hydrological response to earthquakes in the Haibara well, central Japan - II. Possible mechanism inferred from time-varying hydraulic properties

N. Matsumoto·E.A. Roeloffs
View original source ↗Export metadata ↓

Abstract

28 coseismic groundwater level decreases have been observed at the Haibara well, Shizuoka prefecture, central Japan, from 1981 to 1997. These groundwater level changes cannot be explained as the poroelastic response to coseismic static strain. We use the atmospheric pressure and tidal responses of the well, rock properties measured on core samples from the same formation and pumping test results to characterize the hydraulic and mechanical properties of the aquifer. The responses of the Haibara well to the M2 Earth tide constituent and to atmospheric pressure have varied over time. In particular, increasing amplitude and decreasing phase lags were observed after the 1993 pumping test, as well as after earthquakes that caused coseismic water level changes. The tidal response, together with the surface load efficiency derived from the atmospheric pressure response, is used to estimate the mechanical properties of the aquifer. The largest amplitude of the M2 constituent, 2.2 mm, is small enough to imply that pore fluid in this system is approximately twice as compressible as water, possibly due to the presence of a small amount of exsolved gas. Diffusion of a coseismic pressure drop near the well could account for the observed time histories of the water level changes. The time histories of the water level drops are well matched by the decay of a coseismic pressure drop at least 80 m away from the well. Removal of a small amount of gas from the formation in that location might in turn explain the coseismic pressure drops.

Explore related subjects

Geophysical Journal InternationalArticle

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

N. Matsumoto, E.A. Roeloffs. 2003. Hydrological response to earthquakes in the Haibara well, central Japan - II. Possible mechanism inferred from time-varying hydraulic properties. https://doi.org/10.1111/j.1365-246x.2003.02104.x

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

Surface-wave relocation and characterization of the 2024–2025 dyking episode along the Fentale–Dofen segment of the Ethiopian rift

From late-December 2024 to mid-March 2025, a 50-km-long dyke intrusion triggered over 300 earthquakes (magnitude 4 to 5.9) between Fentale and Dofen volcanoes along the Northern Main Ethiopian Rift. Dyke intrusions periodically occur along the Fentale–Dofen magmatic segment and are an expression of ongoing rift extension. Preliminary analyses using interferometric synthetic aperture radar revealed extensive ground deformation (up to 60 cm), which closely matched the temporal and spatial evolution of surface manifestations and earthquake locations from global catalogues. While global catalogues are critical for real-time monitoring, the precision of locations in remote and or sparsely instrumented regions can be low. In this investigation, we present surface-wave relocation results of the dyking episode that began near Fentale volcano in December 2024. We estimate relative locations using differential traveltimes measured from regional-to-teleseismic distance surface-wave observations of earthquakes reported by the U.S. Geological Survey. Relative relocations reduce the initial region of diffuse seismicity to a 50-km-long narrow band bounding the strike of surface manifestations and the zone of maximum surface deformation. We demonstrate the precision of surface-wave relocations over incremental time periods, capturing the progression of dyking from seismic onset through seismic migration and caldera subsidence. Results showcase the utility of surface-wave relocations in the characterization of dyking episodes and provide complementary insights into the current understanding of the Fentale–Dofen volcanic plumbing system.

Geophysical Journal International↗
USGS2026

Subsurface structure across the Tacoma Basin, Washington State, using trans-dimensional Bayesian inversion of fundamental mode spatial autocorrelation data

Spatial autocorrelation (SPAC), the azimuthal average of the normalized cross-correlation between equidistant station pairs deployed in a 2-D array, is widely used to image the subsurface structure. However, the rigorous estimate of subsurface structure and its uncertainties as a function of depth using SPAC data is challenging due to the nonlinear relation between the SPAC data and Earth structure as well as the trade-off between depth and velocity. Additionally, data noise is strongly correlated due to data processing (e.g. filtering, stacking from multiple time segments and azimuthal averaging). Most studies do not account for the correlated noise and fix the ratio of compressional-wave velocity ( V P ) to shear-wave velocity ( V s ) (i.e. V P / V s ratio) and the number of layers, both of which are typically unknown. To address these challenges, we develop a hierarchical trans-dimensional Bayesian inversion of fundamental mode of SPAC data that properly accounts for the correlated data noise, samples the V P / V s ratio and relaxes the number of layers (i.e. model parametrization) to be unknown in the inversion. We further examine the limitation of using only fundamental modes in the inversion. Our synthetic experiments show that the inversion recovers an incorrect model unless we sample the correlated noise and V P / V s ratio in the inversion. The inversion is then applied to SPAC data acquired at 19 sites across the Tacoma basin in Washington State to characterize the V s and the time-averaged V s over 30-m depth ( V s 30 ). Our results show that the V s 30 varies from ∼200 to 800 m s −1 . The V s 30 within the basin is higher in the middle and lower on the east and west sides. We find that these V s 30 values vary with geologic unit. The uncertainties for V s 30 are within 20 m s −1 in average except for the most eastern site TB28. Additionally, the uncertainties are greater for deeper depths beneath most of the sites as the sensitivity decreases as a function of depth. The Vs structure as a function of depth is also complex beneath some sites, possibly because the SPAC curves are affected by higher order Rayleigh modes that are not considered in the inversion. To better constrain the deeper V s structure, V s 30 and/or other average measures of V s over depth, additional constraints from complementary data, such as ellipticity or geologic data are needed. Moreover, our synthetic experiments show that higher order modes can have significant effect in the inversion results, particularly when there is a low-velocity layer.

Washington↗
USGS2025

Refinements to the attenuated propagation of local earthquake shaking (APPLES) ground-motion-based earthquake early warning algorithm

We refined the Attenuated ProPagation of Local Earthquake Shaking (APPLES) ground-motion-based earthquake early warning (EEW) approach, and directly compare APPLES performance with that of the source-characterization-based U.S. ShakeAlert EEW system for a suite of historical earthquakes in the U.S. West Coast and Japan. APPLES is an extension of the Propagation of Local Undamped Motion (PLUM) algorithm in which observed shaking intensity at seismic stations is used to forward-predict intensity distributions to surrounding areas using an attenuation model derived from an intensity prediction equation. We test new configuration options within APPLES, such as using the second highest estimated ground motion rather than the maximum, to better match median ground-motion observations and reduce alerts for small magnitude earthquakes, both of which are key alerting priorities within ShakeAlert. We evaluate these configurations alongside ShakeAlert by comparing the ground-motion estimation accuracy and available warning times relative to station observations and ShakeMap distributions. Our preferred APPLES configuration produces accurate ground-motion estimates and corresponds better with median observations compared to ShakeAlert’s estimates. This preferred configuration substantially reduces alert issuance for M < 5.0 earthquakes compared to the previous APPLES configuration, and alert-release criteria can further restrict alerts to primarily M ≥ 5.5 earthquakes without requiring magnitude estimation. Prioritizing matching median-observed ground motions may reduce APPLES warning times compared to configurations that were tuned to avoid missed alerts (such as those that use the maximum estimated ground motions), which can lead to shorter warning times compared to ShakeAlert for the same alert threshold. However, station-based warning time assessments demonstrate that APPLES can outperform ShakeAlert for high target thresholds. APPLES is a simple, independent EEW approach that may improve the robustness of EEW for the West Coast of the U.S.

California, Oregon, Washington↗