Mode of occurrence of arsenic in four US coals

A. Kolker; Frank E. Huggins; C.A. Palmer; N. Shah; S.S. Crowley; G.P. Huffman; R. B. Finkelman

doi:10.1016/s0378-3820(99)00095-8

Home/Archive/USGS

USGS · 70022875

Mode of occurrence of arsenic in four US coals

A. Kolker·Frank E. Huggins·C.A. Palmer·N. Shah·S.S. Crowley·G.P. Huffman·R. B. Finkelman

View original source ↗Export metadata ↓

Abstract

An integrated analytical approach has been used to determine the mode of occurrence of arsenic in samples of four widely used US coals: the Pittsburgh, Illinois #6, Elkhorn/Hazard, and Wyodak. Results from selective leaching, X-ray absorption fine structure (XAFS) spectroscopy, and electron microprobe analysis show that pyrite is the principal source of arsenic in the three bituminous coals, but the concentration of As in pyrite varies widely. The Wyodak sample contains very little pyrite; its arsenic appears to be primarily associated with organics, as As3+, or as arsenate. Significant (10-40%) fractions of arsenate, derived from pyrite oxidation, are also present in the three bituminous coal samples. This information is essential in developing predictive models for arsenic behavior during coal combustion and in other environmental settings.

Explore related subjects

Fuel Processing Technology Article

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

A. Kolker, Frank E. Huggins, C.A. Palmer, N. Shah, S.S. Crowley, G.P. Huffman, R. B. Finkelman. 2000. Mode of occurrence of arsenic in four US coals. https://doi.org/10.1016/s0378-3820(99)00095-8

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2005

Experimental investigation of CO2-brine-rock interactions at elevated temperature and pressure: Implications for CO2 sequestration in deep-saline aquifers

Deep-saline aquifers are potential repositories for excess CO 2 , currently being emitted to the atmosphere from anthropogenic activities, but the reactivity of supercritical CO 2 with host aquifer fluids and formation minerals needs to be understood. Experiments reacting supercritical CO 2 with natural and synthetic brines in the presence and absence of limestone and plagioclase-rich arkosic sandstone showed that the reaction of CO 2 -saturated brine with limestone results in compositional, mineralogical, and porosity changes in the aquifer fluid and rock that are dependent on initial brine composition, especially dissolved calcium and sulfate. Experiments reacting CO 2 -saturated, low-sulfate brine with limestone dissolved 10% of the original calcite and increased rock porosity by 2.6%. Experiments reacting high-sulfate brine with limestone, both in the presence and absence of supercritical CO 2 , were characterized by the precipitation of anhydrite, dolomitization of the limestone, and a final decrease in porosity of 4.5%. However, based on favorable initial porosity changes of about 15% due to the dissolution of calcite, the combination of CO 2 co-injection with other mitigation strategies might help alleviate some of the well-bore scale and formation-plugging problems near the injection zone of a brine disposal well in Paradox Valley, Colorado, as well as provide a repository for CO 2 . Experiments showed that the solubility of CO 2 is enhanced in brine in the presence of limestone by 9% at 25 °C and 6% at 120 °C and 200 bar relative to the brine itself. The solubility of CO 2 is enhanced also in brine in the presence of arkosic sandstone by 5% at 120 °C and 300 bar. The storage of CO 2 in limestone aquifers is limited to only ionic and hydraulic trapping. However, brine reacted with supercritical CO 2 and arkose yielded fixation and sequestration of CO 2 in carbonate mineral phases. Brine desiccation was observed in all experiments containing a discrete CO 2 phase, promoting porosity-reducing precipitation reactions in aquifers near saturation with mineral phases.

Colorado↗

USGS2001

Temporal and spatial variations in fly ash quality

Fly ash quality, both as the amount of petrographically distinguishable carbons and in chemistry, varies in both time and space. Temporal variations are a function of a number of variables. Variables can include variations in the coal blend organic petrography, mineralogy, and chemistry; variations in the pulverization of the coal, both as a function of the coal's Hardgrove grindability index and as a function of the maintenance and settings of the pulverizers; and variations in the operating conditions of the boiler, including changes in the pollution control system. Spatial variation, as an instantaneous measure of fly ash characteristics, should not involve changes in the first two sets of variables listed above. Spatial variations are a function of the gas flow within the boiler and ducts, certain flow conditions leading to a tendency for segregation of the less-dense carbons in one portion of the gas stream. Caution must be applied in sampling fly ash. Samples from a single bin, or series of bins, m ay not be representative of the whole fly ash, providing a biased view of the nature of the material. Further, it is generally not possible to be certain about variation until the analysis of the ash is complete. ?? 2001 Elsevier Science B.V. All rights reserved.

Fuel Processing Technology↗

USGS2000

Corrosivities in a pilot-scale combustor of a British and two Illinois coals with varying chlorine contents

Many US boiler manufacturers have recommended limits on the chlorine (Cl) content (< 0.25% or < 0.3%) of coals to be used in their boilers. These limits were based primarily on extrapolation of British coal data to predict the probable corrosion behavior of US coals. Even though Cl-related boiler corrosion has not been reported by US utilities burning high-Cl Illinois coals, the manufacturer's limits affect the marketability of high-Cl Illinois coals. This study measured the relative rates of corrosion caused by two high-Cl coals (British and Illinois) and one low-Cl Illinois baseline coal under identical pilot-scale combustion conditions for about 1000 h which gave reliable comparisons. Temperatures used reflected conditions in boiler superheaters. The corrosion probes were fabricated from commercial alloy 304SS frequently used at the hottest superheater section of utility boilers. The results showed no evidence of direct correlation between the coal chlorine content and rate of corrosion. A correlation between the rate of corrosion and the metal temperature was obvious. The results suggested that the different field histories of corrosivity from burning high-Cl Illinois coal and high-Cl British coal occurred because of different metal temperatures operated in US and UK utility boilers. The results of this study can be combined into a database, which could be used for lifting the limits on chlorine contents of coals burned in utility boilers in the US.

Fuel Processing Technology↗