Debris-flow hazards in the Blue Ridge of central Virginia

G. F. Wieczorek; B. A. Morgan; R. H. Campbell

doi:10.2113/gseegeosci.6.1.3

Home/Archive/USGS

USGS · 70022353

Debris-flow hazards in the Blue Ridge of central Virginia

G. F. Wieczorek·B. A. Morgan·R. H. Campbell

View original source ↗Export metadata ↓

Abstract

The June 27, 1995, storm in Madison County, Virginia produced debris flows and floods that devastated a small (130 km 2 ) area of the Blue Ridge in the eastern United States. Although similar debris-flow inducing storm events may return only approximately once every two thousand years to the same given locale, these events affecting a similar small-sized area occur about every three years somewhere in the central and southern Appalachian Mountains. From physical examinations and mapping of debris-flow sources, paths, and deposits in Madison County, we develop methods for identifying areas subject to debris flows using Geographic Information Systems (GIS) technology. We examined the rainfall intensity and duration characteristics of the June 27, 1995, and other storms, in the Blue Ridge of central Virginia, and have defined a minimum threshold necessary to trigger debris flows in granitic rocks. In comparison with thresholds elsewhere, longer and more intense rainfall is necessary to trigger debris flows in the Blue Ridge.

Explore related subjects

Environmental & Engineering Geoscience Article

Source-reported bounding extent: 37.903032319353656° to 39.095962936305476° latitude; -79.29656982421875° to -77.6019287109375° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

G. F. Wieczorek, B. A. Morgan, R. H. Campbell. 2000-02-01. Debris-flow hazards in the Blue Ridge of central Virginia. https://doi.org/10.2113/gseegeosci.6.1.3

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2025

Developing a probabilistic tsunami hazard assessment framework for Pacific sources: USGS Powell Center meeting summary

Multi-organizational principal investigators formed a U.S. Geological Survey (USGS) Powell Center Working Group (WG), Tsunami Source Standardization for Hazards Mitigation in the United States, to develop a comprehensive series of sources capable of generating tsunamis that could impact U.S. state and territory coastal areas using probabilistic tsunami hazard analysis (PTHA). PTHA results are commonly used to provide consistent tsunami hazard information for use in engineering and risk assessment and, to a lesser extent, hazard response planning. Following an initial weeklong planning meeting in April 2018, designed to establish the WG’s scope, a series of weeklong meetings devoted to aspects of tsunami hazards placed emphasis on assessment of various tsunami sources, including subduction zones in Alaska, the Atlantic and Caribbean, Cascadia, and the Pacific Basin, as well as landslides in Alaska, the Atlantic, and the Caribbean. The final meeting in the series discussed tsunami sources from crustal faults. These meetings, each with a regional geographic focus, were designed to incorporate reviews and feedback from subject matter experts (SMEs) in academia, private industry, and federal, state, and local governmental organizations. Incorporating consensus from SMEs is important because the results derived from the tsunami source models will be used to inform the public about potential hazards from tsunamis related to safety concerns. This paper describes the USGS Powell Center meeting in March 2023, devoted specifically to developing a PTHA for tsunami sources in the Pacific Ocean Basin other than the Alaska–Aleutian and Cascadia subduction zones that were addressed during previous WG meetings.

Environmental & Engineering Geoscience↗

USGS2017

Hydrological and geophysical investigation of streamflow losses and restoration strategies in an abandoned mine lands setting

Longitudinal discharge and water-quality campaigns (seepage runs) were combined with surface-geophysical surveys, hyporheic-temperature profiling, and watershed-scale hydrological monitoring to evaluate the locations, magnitude, and impact of streamwater losses from the West Creek subbasin of the West West Branch Schuylkill River into the underground Oak Hill Mine complex that extends beneath the watershed divide. Abandoned mine drainage (AMD), containing iron and other contaminants, from the Oak Hill Boreholes to the West Branch Schuylkill River was sustained during low-flow conditions and correlated to streamflow lost through the West Creek streambed. During high-flow conditions, streamflow was transmitted throughout West Creek; however, during low-flow conditions, all streamflow from the perennial headwaters was lost within the 300-to-600-m "upper reach" where an 1889 mine map indicated steeply dipping coalbeds underlie the channel. During low-flow conditions, the channel within the "intermediate reach" 700-to-1650-m downstream gained groundwater seepage with higher pH and specific conductance than upstream; however, all streamflow 1650-to-2050-m downstream was lost to underlying mines. Electrical resistivity and electromagnetic conductivity surveys indicated conductive zones beneath the upper reach, where flow loss occurred, and through the intermediate reach, where gains and losses occurred. Temperature probes at 0.06-to-0.10-m depth within the hyporheic zone of the intermediate reach indicated potential downward fluxes as high as 2.1x10-5 m/s. Cumulative streamflow lost from West Creek during seepage runs averaged 53.4 L/s, which equates to 19.3 percent of the daily average discharge of AMD from the Oak Hill Boreholes and a downward flux of 1.70x10-5 m/s across the 2.1-km-by-1.5-m West Creek stream-channel area.

Pennsylvania↗

USGS2016

The road to Yucca Mountain—Evolution of nuclear waste disposal in the United States

The generation of electricity by nuclear power and the manufacturing of atomic weapons have created a large amount of spent nuclear fuel and high-level radioactive waste. There is a world-wide consensus that the best way to protect mankind and the environment is to dispose of this waste in a deep geologic repository. Initial efforts focused on salt as the best medium for disposal, but the heat generated by the radioactive waste led many earth scientists to examine other rock types. In 1976, the director of the U.S. Geological Survey (USGS) wrote to the U.S. Energy Research and Development Administration (ERDA), predecessor agency of the U.S. Department of Energy (DOE), suggesting that there were several favorable environments at the Nevada Test Site (NTS), and that the USGS already had extensive background information on the NTS. Later, in a series of communications and one publication, the USGS espoused the favorability of the thick unsaturated zone. After the passage of the Nuclear Waste Policy Act (1982), the DOE compiled a list of nine favorable sites and settled on three to be characterized. In 1987, as the costs of characterizing three sites ballooned, Congress amended the Nuclear Waste Policy Act directing the DOE to focus only on Yucca Mountain in Nevada, with the proviso that if anything unfavorable was discovered, work would stop immediately. The U.S. DOE, the U.S. DOE national laboratories, and the USGS developed more than 100 detailed plans to study various earth-science aspects of Yucca Mountain and the surrounding area, as well as materials studies and engineering projects needed for a mined geologic repository. The work, which cost more than 10 billion dollars and required hundreds of man-years of work, culminated in a license application submitted to the U.S. Nuclear Regulatory Commission (NRC) in 2008.

Environmental & Engineering Geoscience↗