Geology Reports⌕ Search
Home/Archive/USGS

USGS · 70019091

Trace metal speciation in natural waters: Computational vs. analytical

D. Kirk Nordstrom
View original source ↗Export metadata ↓

Abstract

Improvements in the field sampling, preservation, and determination of trace metals in natural waters have made many analyses more reliable and less affected by contamination. The speciation of trace metals, however, remains controversial. Chemical model speciation calculations do not necessarily agree with voltammetric, ion exchange, potentiometric, or other analytical speciation techniques. When metal-organic complexes are important, model calculations are not usually helpful and on-site analytical separations are essential. Many analytical speciation techniques have serious interferences and only work well for a limited subset of water types and compositions. A combined approach to the evaluation of speciation could greatly reduce these uncertainties. The approach proposed would be to (1) compare and contrast different analytical techniques with each other and with computed speciation, (2) compare computed trace metal speciation with reliable measurements of solubility, potentiometry, and mean activity coefficients, and (3) compare different model calculations with each other for the same set of water analyses, especially where supplementary data on speciation already exist. A comparison and critique of analytical with chemical model speciation for a range of water samples would delineate the useful range and limitations of these different approaches to speciation. Both model calculations and analytical determinations have useful and different constraints on the range of possible speciation such that they can provide much better insight into speciation when used together. Major discrepancies in the thermodynamic databases of speciation models can be evaluated with the aid of analytical speciation, and when the thermodynamic models are highly consistent and reliable, the sources of error in the analytical speciation can be evaluated. Major thermodynamic discrepancies also can be evaluated by simulating solubility and activity coefficient data and testing various chemical models for their range of applicability. Until a comparative approach such as this is taken, trace metal speciation will remain highly uncertain and controversial.

Explore related subjects

Water, Air, & Soil PollutionArticle

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

D. Kirk Nordstrom. 1996-07-01. Trace metal speciation in natural waters: Computational vs. analytical. https://doi.org/10.1007/bf00619286

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2025

Quantifying leachable phosphorus from the leaves of common midwest urban street trees and implications for stormwater management

Urban runoff containing high amounts of nutrients like phosphorus (P) is a well-established driver of surface water eutrophication. In residential areas, a primary source of nutrients is derived from leaf litter. P contained in leaves is leached and transported by stormwater from source to stream. The majority of P leached from leaf litter is in the dissolved phase, which can be difficult to remove using conventional treatment practices, leaving source control as the most viable option. Additional tools are needed to help forecast how different tree species may improve or hinder contributions of nutrients to runoff. For this reason, ten street tree species that are common throughout the contiguous U.S. were chosen to evaluate the effect of species on leachable P from tree leaves using laboratory experiments. After 48 h of exposure to water, the amount of P released ranged from 2.16 mg P g −1 leaf for Silver Maple to 0.03 mg P g −1 leaf for Hackberry. More than half of the P was lost in the first 12 h for eight of the ten tree species, making guided source control important to reduce inputs to surface water from key locations. Results were used to identify ‘hotspots’ of P leaching in Madison, WI and can be used to assess current street tree inventories that can then guide management to areas with the highest nutrient reduction potential and inform urban foresters who may wish to tailor future planting scenarios that minimize nutrients in runoff.

Wisconsin↗
USGS2019

Response of water chemistry and young-of-year brook trout to channel and watershed liming in streams showing lagging recovery from acidic deposition

Reductions in sulfur emissions have initiated chemical recovery of surface waters impacted by acidic deposition in the Adirondack region of New York State. However, acidified streams remain common in the region, which limits recovery of brook trout ( Salvelinus fontinalis ) populations. To investigate liming as a method to accelerate recovery of brook trout, the channels of two acidified streams were limed annually from 2012 to 2015, and an entire watershed of a third acidified tributary was limed by helicopter in 2013. Stream flow, water chemistry, and density of young-of-year (YOY) brook trout were measured in limed streams, an untreated acidified stream, and a buffered reference stream. Lime additions increased pH and acid-neutralizing capacity and decreased inorganic monomeric aluminum concentrations to less than 2.0 μmol/L, the minimum concentration at which in situ brook trout mortality has been documented. However, of the two channel-limed streams, only stream T8 showed a significant response (P < 0.01) in YOY density, increasing from a mean of 0.4 fish/m2 before liming to 2.7 fish/m2 after liming. No YOY brook trout response was observed in the stream within the limed watershed. Groundwater inputs to streams were identified by relative differences in temperature and concentrations of silica and sodium. YOY brook trout densities increased only in the channel-limed stream (T8) with suitable groundwater inputs for fall spawning and a summer nursery. Results suggest that targeted liming of acidified streams with the necessary groundwater habitat could be beneficial in accelerating recovery of brook trout populations.

New York↗
USGS2018

Arsenic geochemistry of alluvial sediments and pore waters affected by mine tailings along the Belle Fourche and Cheyenne River floodplains

Gold mining operations in the northern Black Hills of South Dakota resulted in the discharge of arsenopyrite-bearing mine tailings into Whitewood Creek from 1876 to 1977. Those tailings were transported further downstream along the Belle Fourche River, the Cheyenne River, and the Missouri River. An estimated 110 million metric tons of tailings remain stored in alluvial deposits of the Belle Fourche and Cheyenne Rivers. Pore-water dialysis samplers were deployed in the channel and backwaters of the Belle Fourche and Cheyenne Rivers to determine temporal and seasonal changes in the geochemistry of groundwater in alluvial sediments. Alluvial sediment adjacent to the dialysis samplers were cored for geochemical analysis. In comparison to US Environmental Protection Agency drinking water standards and reference concentrations of alluvial sediment not containing mine tailings, the Belle Fourche River sites had elevated concentrations of arsenic in pore water (2570 μg/L compared to 10 μg/L) and sediment (1010 ppm compared to < 34 ppm), respectively. Pore water arsenic concentration was affected by dissolution of iron oxyhydroxides under reducing conditions. Sequential extraction of iron and arsenic from sediment cores indicates that substantial quantities of soluble metals were present. Dissolution of arsenic sorbed to alluvial sediment particles appears to be affected by changing groundwater levels that cause shifts in redox conditions. Bioreductive processes did not appear to be a substantial transport pathway but could affect speciation of arsenic, especially at the Cheyenne River sampling sites where microbial activity was determined to be greater than at Belle Fourche sampling sites.

Belle Fourche River, Cheyenne River↗