Geology Reports⌕ Search
Home/Archive/USGS

USGS · 70018309

Devonian volcanogenic massive sulfide deposits and occurrences, southern Yukon-Tanana Terrace, eastern Alaska Range, Alaska

I. M. Lange·W. J. Nokleberg·S.R. Newkirk·J. N. Aleinikoff·S. E. Church·H.R. Krouse
View original source ↗Export metadata ↓

Abstract

A belt of volcanogenic massive sulfide deposits extends for over 150 km along the southern margin of the Yukon-Tanana terrane of the eastern Alaska Range. Located north of the Denali fault, the Yukon-Tanana terrane forms a major basement unit in east-central Alaska. The volcanogenic massive sulfide deposits are primarily in the Jarvis Creek Glacier subterrane, one of the highest structural-stratigraphic levels of the Yukon-Tanana terrane. The Jarvis Creek Glacier subterrane consists of a volcanogenic massive sulfide-bearing metavolcanic rock member and a metasedimentary rock member. The volcanogenic massive sulfide deposits and enclosing metavolcanic and metasedimentary schists exhibit two periods of regional metamorphism and penetrative deformation: an older, Early Cretaceous, amphibolite facies event and a younger, mid-Cretaceous lower greenschist facies event.From northwest to southeast, the major volcanogenic massive sulfide districts are the Bonnifield, Trident Glacier, and Delta. The Bonnifield district contains massive sulfide deposits in metavolcanic and metasedimentary rocks that are correlated with the Jarvis Creek Glacier subterrane. The 25-km-long, northwest-trending Trident Glacier district contains several occurrences consisting of massive pyrrhotite and lesser pyrite, minor chalcopyrite with or without sphalerite, and galena and arsenopyrite in south-dipping massive sulfide pods, lenses, and stringers that parallel the foliation of the enclosing schists. Host-rock protoliths were mainly andesite, dacite, rhyodacite tuffs and flows, shale, and limestone, with lesser quartz-rich keratophyre flows and tuffs, volcanic graywacke, and siltstone.The Delta district contains at least 35 deposits in an 800-km 2 area. Thirty-one of the deposits define four mineral trends, 5 to 32 km long, that are subparallel to the west-northwest-striking, southwest-dipping structures and lithologies. The deposits consist of layers and zones containing varying amounts of massive to disseminated pyrite and pyrrhotite, and lesser amounts of chalcopyrite, galena, sphalerite, and arsenopyrite. The larger deposits range between 1.0 and 12.4 million metric tons with combined grades of 5.6 percent total metal (Cu, Pb, Zn), and Ag and Au contents of 56 and 1.9 g/metric ton, respectively. Hostrock protoliths are similar to those found in the Trident Glacier district, but some of the deposits are spatially associated with diorite or gabbro sills that exhibit lower greenschist facies metamorphism and deformation.Sulfur isotope values of 26 pyrrhotite separates from the Trident Glacier district occurrences average 7.7 per mil, the mean value of seven pyrite separates is 8.1 per mil. Forty-one Delta district pyrite separates average 5.9 per mil and ranges of values of the four northwest-trending trends overlap. The relative consistency of sulfur isotope values of iron-bearing sulfides in the Trident Glacier district, and the apparent lithologic relationship of isotope values in the Delta district, may reflect original-rock sulfur isotope values. Alternatively, the 34 S-enriched values may have resulted from the addition of reduced seawater sulfate to the hydrothermal fluid. The sulfide accumulations are interpreted as kuroko-like deposits that formed along a Devonian continental margin igneous arc. Deeper level portions of the arc are exposed in structurally lower levels of the Yukon-Tanana terrane to the north and contain metamorphosed granodiorite and granite plutons of Devonian to Mississippian age. U-Pb isotope data from zircons from metavolcanic rocks hosting the sulfide bodies indicate an age of about 370 Ma. The 207 Pb/ 204 Pb ratios for sulfides from the three districts are similar and indicate lead was in part derived from first-cycle sediments that were eroded largely from Precambrian crystalline rocks. The 207 Pb/ 204 Pb ratios from feldspars in Devonian metavolcanic rocks are similar to those in sulfides and indicate incorporation of radiogenic Precambrian lead into the Devonian magmas. A Precambrian crystalline source for detritus in metasedimentary rocks is indicated by locally abundant quartzite containing approximately 2.3 Ga zircons which were derived from the Hudsonian-age block of the Canadian Shield in southern British Columbia.Cretaceous greenschist facies retrogressive metamorphism and intense penetrative deformation is indicated by reequilibration of U-Pb isotope ratios, metamorphic Rb-Sr mineral isochrons, and K-Ar biotite and muscovite ages of 110 to 115 Ma. The data indicate that the mid-Cretaceous retrogressive metamorphism and associated intense deformation occurred during the accretion of the Yukon-Tanana terrane to Alaska.

Explore related subjects

Economic GeologyArticle

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

I. M. Lange, W. J. Nokleberg, S.R. Newkirk, J. N. Aleinikoff, S. E. Church, H.R. Krouse. 1993-04-01. Devonian volcanogenic massive sulfide deposits and occurrences, southern Yukon-Tanana Terrace, eastern Alaska Range, Alaska. https://doi.org/10.2113/gsecongeo.88.2.344

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

Origin of the Pd/Pt ratio of the J-M Reef, Stillwater Complex, Montana, USA

The J-M reef of the Stillwater Complex is characterized by a high Pd/Pt ratio (mean ~3.8 with a standard error of 0.03) with a homogeneous geospatial distribution at the deposit scale. In this contribution, we demonstrate that the Pd/Pt ratio of the reef is the product of equilibration of an immiscible sulfide liquid with a silicate melt rich in Pd relative to Pt. Despite the high tenors of the J-M reef sulfides (avg 2,700 ppm Pt and 770 ppm Pt), numerical modeling shows that the parental melts did not have extraordinary Pd and Pt concentrations. Instead, the initial composition of a plausible parental silicate melt can have Pd and Pt contents well within the expected range of a normal, mantle-derived partial melt (i.e., ~10–20 ppb for both Pd and Pt with Pd/Pt of ~1). The relative differences in the partitioning behavior of Pt and Pd between sulfide liquid and silicate melt are unlikely to produce a consistent Pd/Pt ratio across a wide range of silicate melt to sulfide liquid mass ratios (i.e., R factors). Instead, the pre-emplacement fractionation of Pt alloy from S-undersaturated silicate magma accounts for the homogeneous and high Pd/Pt ratio of the J-M reef. We show that batch equilibration of sulfide liquid with silicate melt can produce the high Pd/Pt ratios of the reef if the partition coefficients between sulfide liquid and silicate melt for Pd and Pt are extremely high (>10 6 ). In an alternative model, Pd enrichment could be achieved by sulfide upgrading in resident footwall mush even if the partition coefficients between sulfide liquid and silicate melt are relatively small (between 10 4 and 10 6 ) because the instantaneous mass ratio of silicate melt to sulfide liquid is small (R ≈ 100–700), so the partitioning behavior of Pt and Pd has little impact on the composition of sulfide liquid.

Montana↗
USGS2025

Depth of magma crystallization and fluid exsolution beneath the porphyry-skarn Cu deposits at Santa Rita and Hanover-Fierro, New Mexico, USA

The depth level at which porphyry Cu–forming magmas fractionated and exsolved mineralizing fluids is actively debated. In the classic model, extensive magma fractionation occurs in large, upper crustal magma chambers, and concomitant fluid exsolution leads to forceful expulsion of residual magmas in the form of porphyry dikes, stocks, and breccia pipes, which subsequently serve as pathways for the mineralizing fluids. In contrast, some recent studies highlighting the role of deep crustal magma fractionation in the production of fertile magmas essentially deny the existence of upper crustal magma chambers at the time of mineralization. To address this, we conducted a detailed thermobarometric investigation of 13 intermediate to felsic, porphyritic intrusive rocks related to porphyry-skarn Cu mineralization at Santa Rita and Hanover-Fierro, New Mexico, United States, representing two premineralization magmas (61–60 Ma), seven synmineralization magmas (60–58 Ma), and four late- to postmineralization magmas (58–57 Ma). For each sample, the pressure of last magma crystallization before final magma ascent to the current exposure level was reconstructed based on Al-in-hornblende barometry of small hornblende inclusions trapped within quartz phenocrysts and through titanium-in-quartz (TitaniQ) thermobarometry of the host quartz phenocrysts themselves. Since quartz is one of the last crystallizing magmatic minerals, and no significant phenocryst growth could have occurred in small dikes and stocks after final magma emplacement, quartz phenocrysts and their contained hornblende inclusions record the depth of last magma crystallization before final magma ascent. When present, hornblende phenocrysts and hornblende inclusions within other major phenocrysts were also analyzed. Both quartz and hornblende barometers return consistent average pressures of 3.2 ± 0.4 kbar for the entire suite of pre- to postmineralization magmas, corresponding to depths of 11 to 14 km. The synmineralization magmas return even more consistent average pressures of 3.1 ± 0.2 kbar, corresponding to a depth of 12 ± 1 km. The volume of the mineralizing porphyry dikes and stocks at the emplacement level is far too small to have provided all the fluids and metals required to form the observed ore deposits. Therefore, the majority of the ore-forming fluids must have originated from the magmas that crystallized at 12 ± 1 km depth. The ore deposits, conversely, formed at ~5-km paleodepth. This implies that most of the mineralizing fluids traveled an average vertical distance of ~7 km from their magmatic source to the eventual site of ore precipitation. The relatively unaltered nature and low veining degree of deeper parts of mineralized porphyry dikes and stocks suggest that the fluid transport through these intrusive bodies occurred mostly at near-solidus conditions by means of fluid percolation along grain boundaries. In summary, our results suggest that (1) a large, upper crustal pluton exists ~7 km beneath the Santa Rita and Hanover-Fierro deposits; (2) abundant phenocryst crystallization occurred at this depth level; and (3) this pluton was the main source for the exsolution of ore-forming fluids. However, the investigated rocks have elevated whole-rock Sr/Y ratios, indicating magma fractionation at deep crustal levels. As a result, our preferred model is a combination of the two end-member models introduced above, with most magma fractionation having occurred in the deep crust and with residual, intermediate to felsic melts having ascended and accumulated at 11 to 14 km paleodepth, where they continued to crystallize with comparatively little crystal-liquid separation, before some of these magmas ascended further to shallow levels and quenched to porphyries.

New Mexico↗
USGS2025

Assimilation of reduced carbon triggers platinum alloy saturation in mafic and ultramafic magmas

It is generally observed that magmatic sulfide ores have higher ratios of Pd/Pt than the mantle-like values of their parental magmas. This discrepancy has defied simple explanation because the partitioning behavior of both elements between sulfide and silicate liquids is very similar. Assimilation of sulfur- and carbon-rich country rocks by mafic and ultramafic magmas is considered a critical, if not essential, step in the formation of magmatic base metal sulfide deposits. Although there is general consensus that the assimilation of external sulfur and carbon promotes sulfide saturation, the effect of carbon assimilation on the solubilities of platinum-group elements in natural S-bearing silicate melt has been overlooked. In this study, we investigate the variations of platinum and palladium solubilities during assimilation of graphite and methane through thermodynamic modeling, in comparison with data from an array of highly distinctive magmatic sulfide ore systems representing ages from Archean to Paleozoic, melt compositions from komatiite to basalt, and magmatic settings including lavas, hypabyssal intrusions, plutonic continental arc roots, and plutonic layered intrusions, namely: Raglan, Norilsk-Talnakh, Lac des Iles, and the J-M Reef of the Stillwater Complex. We model assimilation-fractional crystallization processes to estimate the reduction of oxygen fugacity ( ⁠fO2⁠ ) of the melt due to incorporation of graphite and methane. The simulations show that although Pd remains highly soluble during the progressive assimilation of reduced carbon, Pt solubility decreases significantly as the silicate melt becomes increasingly reduced. With less than 8 % of sediment assimilation, Pt alloy may saturate and then deviate from sulfide-undersaturated silicate melts, concomitantly increasing the Pd/Pt value of the remaining melts of the Raglan and Norilsk-Talnakh systems. For the Lac des Iles and Stillwater systems, a higher extent of assimilation is needed to reach Pt saturation because of the relatively carbon-poor nature of the lower crustal rocks. The assimilation of methane volatiles is shown to be more effective than graphite assimilation, and it provides a pathway to Pt alloy fractionation in the absence of detectable amounts of bulk host-rock assimilation. High Pd/Pt values have been documented in many world-class magmatic sulfide deposits whose parental magmas have demonstrably experienced crustal contamination. Our model suggests that although anomalous Pd/Pt values may be explained by other mechanisms such as incongruent melting of preexisting sulfide or differences in the diffusivities of the metals within achieving equilibration, the assimilation of graphite or methane may play an important role in the global occurrence of magmatic sulfide ores with elevated Pd/Pt values.

Economic Geology↗